QUINT POWER power supplies with maximum functionality
QUINT POWER circuit breakers magnetically and therefore quickly trip at six times the nominal current, for selective and therefore cost-effective system protection. In addition, the high system availability is ensured by preventive function monitoring which reports critical operating states before errors can occur.
Reliable starting of heavy loads takes place via the static power reserve POWER BOOST. Thanks to the adjustable voltage, all ranges between 18 V DC ... 29.5 V DC are covered.
QUINT-PS/1AC/24DC/20/CO
-
Power supply, with protective coating
2320898
Primary-switched power supply unit QUINT POWER, Screw connection, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 24 V DC / 20 A
Tuotetiedot
UL Recognized
Hyväksyntätunnus: E211944EAC
Hyväksyntätunnus: RU S-DE.BL08.W.00764UL Listed
Hyväksyntätunnus: E123528-20070724Type approved
Hyväksyntätunnus: SI-SIQ BG 005/110 A1DNV
Hyväksyntätunnus: TAA000030XcCSAus
Hyväksyntätunnus: 1897790BIS Licence Document
Hyväksyntätunnus: R-41268801IECEE CB Scheme
Hyväksyntätunnus: SI-10293IECEE CB Scheme
Hyväksyntätunnus: SI-10262EAC Ex
Hyväksyntätunnus: KZ 7500525010102094IECEx
Hyväksyntätunnus: IECEx SIQ 14.0001XATEX
Hyväksyntätunnus: SIQ 14 ATEX 137 XNEPSI-EX
Hyväksyntätunnus: GYJ20.1321XCCC
Hyväksyntätunnus: 2020322303000835
Edut
For superior system availability
Reliable starting of difficult loads with the static POWER BOOST power reserve with up to 1.5 times the nominal current permanently
Fast tripping of standard circuit breakers with dynamic power reserve SFB (selective fuse breaking) technology with up to 6 times the nominal current for 12 ms
Preventive function monitoring
Optimum protection with dip coating for 100 % humidity
Usein kysytyt kysymykset
Can I trigger a standard miniature circuit breaker with the power supply?
Yes, standard miniature circuit breakers can be triggered safely with the QUINT power supply. Please refer to the SFB configuration matrix, which can be found under Various in the download area.
Can the power supply also be used in environments with corrosive gas contamination?
All our QUINT power supplies are tested in accordance with the ISA G3 Harsh Group A standard and meet the requirements of the standard.
Why is the housing of the power supply warmer than that of other manufacturers?
The reason for this is our heat dissipation concept: All power components are located on the side panels or on the rear panel. The advantage here is that the temperatures inside remain cooler, which increases the service life of the power supply.
Can I operate the DC OK relay with the output voltage of the power supply?
The DC OK relay can be connected to the output voltage of the power supply, but may only be loaded with max. 1 A. We recommend using a protective circuit for this.
Can interference from the supply network be transmitted to the output of the power supply?
No, since the QUINT power supply is designed with a multi-stage converter concept, interference is not transmitted. Interference is already eliminated in the input circuit and does not reach the 24 V output of the power supply.