QUINT POWER power supplies with maximum functionality
QUINT POWER circuit breakers magnetically and therefore quickly trip at six times the nominal current, for selective and therefore cost-effective system protection. The high level of system availability is additionally ensured, thanks to preventive function monitoring, as it reports critical operating states before errors occur.
Reliable starting of heavy loads takes place via the static power reserve POWER BOOST. Thanks to the adjustable voltage, all ranges between 5 V DC ... 56 V DC are covered.
QUINT-PS/3AC/24DC/20
-
Power supply
2866792
Please use the following item for new projects: 2904622 QUINT4-PS/3AC/24DC/20. Primary-switched power supply unit QUINT POWER, Screw connection, SFB Technology (Selective Fuse Breaking), input: 3-phase, output: 24 V DC / 20 A, adjustable from 18 V DC ... 29.5 V DC, 450 V DC ... 800 V DC
Detalii despre produs
UL Recognized
ID de înregistrare: E211944IECEE CB Scheme
ID de înregistrare: SI-2794EAC
ID de înregistrare: RU S-DE.BL08.W.00764LR
ID de înregistrare: LR22301698TA-02NK
ID de înregistrare: TA24091MBV
ID de înregistrare: 21004/D0 BVEAC
ID de înregistrare: RU S-DE.BL08.W.00764UL Listed
ID de înregistrare: E123528BSH
ID de înregistrare: 581RINA
ID de înregistrare: ELE333522XGABS
ID de înregistrare: 23-2355407-PDAType approved
ID de înregistrare: SI-SIQ BG 005/002SEMI F47
ID de înregistrare: SEMI F47DNV
ID de înregistrare: TAA000030XcCSAus
ID de înregistrare: 1925529EAC
ID de înregistrare: KZ7500651 0101 12535UL Listed
ID de înregistrare: E199827
Avantajele dumneavoastră
Reliable starting of difficult loads
High level of system availability even in the event of permanent phase failure
Preventive function monitoring
Întrebări frecvente
Can I trigger a standard miniature circuit breaker with the power supply?
Yes, standard miniature circuit breakers can be triggered safely with the QUINT power supply. Please refer to the SFB configuration matrix, which can be found under Various in the download area.
Can the power supply also be used in environments with corrosive gas contamination?
All our QUINT power supplies are tested in accordance with the ISA G3 Harsh Group A standard and meet the requirements of the standard.
Why is the housing of the power supply warmer than that of other manufacturers?
The reason for this is our heat dissipation concept: All power components are located on the side panels or on the rear panel. The advantage here is that the temperatures inside remain cooler, which increases the service life of the power supply.
Is this power supply also available with a coated printed circuit board?
Yes, you can use item no. 2320924 QUINT-PS/3AC/24DC/20/CO for this.
Can I operate the DC OK relay with the output voltage of the power supply?
The DC OK relay can be connected to the output voltage of the power supply, but may only be loaded with max. 1 A. We recommend using a protective circuit for this.
Can interference from the supply network be transmitted to the output of the power supply?
No, since the QUINT power supply is designed with a multi-stage converter concept, interference is not transmitted. Interference is already eliminated in the input circuit and does not reach the 24 V output of the power supply.