PT 4X1/S-12DC-ST - Surge protection plug - 2800263

Product properties

Product type	Surge protection for MCR technology
Product family	PLUGTRAB PT
IEC test classification	C1
	C3
VDE requirement class	C1
	C3
Type	Male
Number of positions	4
Surge protection fault message	none
Insulation characteristics
Overvoltage category	III

Electrical properties

Nominal voltage U_N	12 V DC

Connection data

Connection method	Screw connection (in connection with the base element)

Dimensions

Width	17.7 mm
Height	45 mm
Depth	52 mm
Horizontal pitch	1 Div.
Complete module width	17.7 mm
Complete module height	90 mm
Complete module depth	65.5 mm

Material specifications

Flammability rating according to UL 94	V0
Housing material	PA 6.6

Mechanical properties

Mechanical data
Open side panel	No

Protective circuit

Direction of action	Line-Line & Line-Earth Ground
Maximum continuous operating voltage U_C	13 V DC
Maximum continuous operating voltage U_C		9 V AC
Maximum continuous voltage U_C (line-earth)	13 V DC
Maximum continuous voltage U_C (line-earth)		9 V AC
Operating effective current I_C at U_C	≤ 5 µA
Operating effective current I_C at U_C		≤ 20 µA (60 Hz)
Nominal discharge current I_n (8/20) µs (line-ground)	700 A
Total surge current (8/20) µs	2.8 kA
Max. discharge current I_max (8/20) µs maximum (line-earth)	700 A
Max. discharge current I_max (8/20) µs maximum (line-earth)		2.8 kA (all channels)
Nominal pulse current Ian (10/1000) µs (line-earth)	140 A
Nominal pulse current Ian (10/1000) µs (line-earth)		560 A (all channels)
Output voltage limitation at 1 kV/µs (line-earth) static	≤ 22 V
Residual voltage at I_n (conductor-ground)	≤ 38 V
Residual voltage with Ian (10/1000) µs (line-earth)	≤ 23 V
Voltage protection level U_p (line-earth)	≤ 23 V (C1 - 250 A)
		≤ 37 V (C1 - 720 A)
		≤ 19 V (C3 - 10 A)
		≤ 23 V (C3 - 140 A)
Response time t_A	≤ 1 ns
Response time t_A (line-earth)	≤ 1 ns
Input attenuation aE, asym.	typ. 0.3 dB (up to 200 kHz - 50 Ω)
Input attenuation aE, asym.		typ. 0.1 dB (up to 100 kHz - 150 Ω)
Cut-off frequency fg (3 dB), asym. (PE) in 50 Ω system	typ. 1 MHz
Cut-off frequency fg (3 dB), asym. (PE) in 150 Ω system	typ. 400 kHz
Capacity (Core-Earth)	typ. 5 nF
Surge protection fault message	none
Max. required back-up fuse	6 A (gL/MCB type B,C)
Impulse durability (line-earth)	C1 - 720 A
Impulse durability (line-earth)		C3 (140 A)
Alternating current carrying capacity (line-earth)	2 A - 5x 1 s

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 85 °C

Standards and regulations

VDE requirement class	C1
	C3
Air clearances and creepage distances
Standards/regulations	EN 60664-1
Standards/specifications	DIN EN 61643-21
Note	2002
Standards/specifications	IEC 61643-21
Note	2000

Mounting

Tuotenumero	2800263
Pakkausyksikkö	1 Kappaletta
Vähimmäistilausmäärä	1 Kappaletta
Tuoteavain	CL2111
Tuotekoodi	CL2111
GTIN	4046356542746
Paino kappaletta kohti (sis. pakkauksen)	21,8 g
Paino kappaletta kohti (ilman pakkausta)	20,8 g
Tullitariffinumero	85363010
Alkuperämaa	DE

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PT 4X1/S-12DC-ST - Surge protection plug

2800263

Tuotetiedot

Yhteensopivat tuotteet

EU REACH SVHC
Huomautus REACH-kandidaattiaineesta (CAS-nro)	Aineen pitoisuus ei ole yli 0,1 %.

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PT 4X1/S-12DC-ST - Surge protection plug 2800263

Tuotetiedot

Yhteensopivat tuotteet

X-PEN 0,35 - Marker pen 0811228

ZBF 5:UNBEDRUCKT - Zack Marker strip, flat 0808642

ZBF 5/WH-100:UNBEDRUCKT - Zack Marker strip, flat 0808668

ZBN 18:UNBEDRUCKT - Zack marker strip 2809128

SSA 3-6 - Shield connection 2839295

SSA 5-10 - Shield connection 2839512

PT 4X1/S-12DC-ST - Surge protection plug

2800263