Extension module - PSR-SCP- 24DC/URM4/4X1/2X2/B
2981677

1-channel contact extension with TBUS interface, 4 N/O contacts, 1 N/C contact, 1 confirmation current path, undelayed, Cat. 4, PL e in accordance with EN ISO 13849, plug-in screw terminal blocks, width: 22.5 mm

Maksuton lataus saatavilla. Ladattavat tiedostot

Tuotetiedot




Product type Safety relays
Application Extension module
Mechanical service life approx. 107 cycles
Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Insulation characteristics
Overvoltage category III

Maximum power dissipation for nominal condition 1.01 W
Nominal operating mode 100% operating factor
Rated insulation voltage 250 V
Rated surge voltage/insulation 4 kV / basic isolation (safe isolation, reinforced insulation and 6 kV between input circuit/N/C contacts and enabling current paths).

General
Rated control circuit supply voltage US 24 V DC
Voltage range with reference to US 0.9 ... 1.1
Rated control supply current IS 42 mA
Typical response time 10 ms
Typical release time 10 ms
Recovery time 1 s
Protective circuit Surge protection; Suppressor diode
Status display Green LED

Contact type 4 enabling current paths
1 signaling current path
1 confirmation current path
Contact material AgSnO2
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 15 V AC/DC
Limiting continuous current 6 A (N/O contact, DC1/AC1)
3 A (N/C contact)
Maximum inrush current 6 A (N/O contact, DC1/AC1)
3 A (N/C contact)
Inrush current, minimum 25 mA
Sq. Total current 72 A2 (ITH2 = I12 + I22 + I32 + I42)
Interrupting rating (ohmic load) max. 144 W (24 V DC, τ = 0 ms, N/C contact 61/62: 72 W)
288 W (48 V DC, τ = 0 ms, N/C contact 61/62: 144 W)
77 W (110 V DC, τ = 0 ms)
88 W (220 V DC, τ = 0 ms)
1500 VA (250 V AC, τ = 0 ms, N/C contact 61/62: 750 VA)
Maximum interrupting rating (inductive load) 48 W (24 V DC, τ = 40 ms)
40 W (48 V DC, τ = 40 ms)
35 W (110 V DC, τ = 40 ms)
33 W (220 V DC, τ = 40 ms)
Switching capacity min. 0.4 W
Switching capacity according to IEC 60947-5-1 5 A (DC13)
5 A (AC15)
Switching capacity (360/h cycles) 6 A (24 V DC)
5 A (230 V AC)
Switching capacity (3600/h cycles) 3 A (24 V (DC13))
3 A (230 V (AC15))
Output fuse 10 A gL/gG NEOZED (N/O contact)
4 A gL/gG NEOZED (N/C contact)

Connection technology
pluggable yes
Conductor connection
Connection method Screw connection
Conductor cross section solid 0.2 mm² ... 2.5 mm²
Conductor cross-section AWG 24 ... 12
Screw thread M3

Width 22.5 mm
Height 99 mm
Depth 114.5 mm

Housing material Polyamide
Housing color yellow

Safety data
Stop category 0
Safety data: EN ISO 13849
Category 4 (In conjunction with suitable evaluating device)
Performance level (PL) e (In conjunction with suitable evaluating device)
Safety data: IEC 61508 - High demand
Designation The data only applies if the safety function is demanded at least once a year.
Safety Integrity Level (SIL) 3 (In conjunction with suitable evaluating device)
Probability of a hazardous failure per hour (PFHD) 9.7 x 10-11 (In conjunction with suitable evaluating device)
Proof test interval 240 Months
Duration of use 240 Months
Safety data: IEC 61508 - Low demand
Designation The data is only valid if the demand rate is no more than once a year.
Safety Integrity Level (SIL) 3 (In conjunction with suitable evaluating device)
Probability of a hazardous failure on demand (PFDAVG) 1.37 x 10-4 (In conjunction with suitable evaluating device)
Proof test interval 76 Months
Duration of use 240 Months

Ambient conditions
Degree of protection IP20
Min. degree of protection of inst. location IP54
Ambient temperature (operation) -20 °C ... 55 °C
Ambient temperature (storage/transport) -40 °C ... 70 °C
Maximum altitude ≤ 2000 m (Above sea level)
Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)

Air clearances and creepage distances between the power circuits
Standards/regulations IEC 60947-1

Mounting type DIN rail mounting
Mounting position any

Tuotenumero 2981677
Pakkausyksikkö 1 Kappaletta
Vähimmäistilausmäärä 1 Kappaletta
Tuoteavain DNA231
Tuotekoodi DNA231
Luettelosivu Sivu 233 (C-6-2019)
GTIN 4046356081535
Paino kappaletta kohti (sis. pakkauksen) 226 g
Paino kappaletta kohti (ilman pakkausta) 196,9 g
Tullitariffinumero 85371098
Alkuperämaa DE


ECLASS

ECLASS-9.0 27371819
ECLASS-10.0.1 27371819
ECLASS-11.0 27371819

ETIM

ETIM 8.0 EC001449

UNSPSC

UNSPSC 21.0 39122200

EAC

Hyväksyntätunnus: EAC-Zulassung

EAC

Hyväksyntätunnus: RU C-DE.A*30.B.01082

UL Listed

Hyväksyntätunnus: FILE E 140324

cUL Listed

Hyväksyntätunnus: FILE E 140324

Functional Safety

Hyväksyntätunnus: 968/FSP 1678.00/18

EAC

Hyväksyntätunnus: TR TS_D_01838-19

cULus Listed


REACh SVHC Lead 7439-92-1
Hexahydromethylphthalic anhydride
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Edut

4 enabling current paths, 1 signaling current path, and 1 confirmation current path
1- and 2-channel control
Up to Cat. 4/PL e in accordance with EN ISO 13849-1, SIL 3 in accordance with IEC 62061, SIL 3 in accordance with IEC 61508