Relay Module - RIF-1-RPT-LDP-24DC/2X21
2903334

Pre-assembled relay module with Push-in connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact type: 2 changeover contacts. Input voltage: 24 V DC


Tuotetiedot


The pluggable electromechanical and solid-state relays in the RIFLINE complete product range and the base are recognized and approved in accordance with UL 508. The relevant approvals can be called up at the individual components in question.




Notes on operation FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21)

Product type Relay Module
Application Universal
Operating mode 100% operating factor
Mechanical service life approx. 3x 107 cycles
Insulation characteristics
Overvoltage category III
Pollution degree 2
Insulation Safe isolation between input and output
Basic insulation between the changeover contacts

Service life electrical see diagram
Maximum power dissipation for nominal condition 0.43 W
Test voltage Winding/contact 4 kVrms (50 Hz, 1 min., winding/contact)
Test voltage Changeover contact/changeover contact 2.5 kVrms (50 Hz, 1 min., changeover contact/changeover contact)
Rated insulation voltage 250 V AC
Rated surge voltage 6 kV (Input/output)
4 kV (between the changeover contacts)

Coil side
Nominal input voltage UN 24 V DC
Input voltage range 19.2 V DC ... 33.6 V DC (20 °C)
Input voltage range in reference to UN see diagram
Typical input current at UN 18 mA
Typical response time 8 ms
Typical release time 10 ms
Coil voltage 24 V DC
Protective circuit Freewheeling diode
Operating voltage display Yellow LED

Switching
Contact type 2 changeover contacts
Type of switch contact Single contact
Drive and function monostable
Drive (polarity) bipolar
Contact material AgNi
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (10 mA)
Limiting continuous current 8 A (see diagram)
Maximum inrush current 25 A (20 ms, N/O contacts)
Min. switching current 10 mA (5 V)
Interrupting rating (ohmic load) max. 192 W (at 24 V DC)
96 W (at 48 V DC)
60 W (at 60 V DC)
44 W (at 110 V DC)
57 W (at 220 V DC)
2000 VA (for 250 V AC)
Utilization category CB Scheme (IEC 60947-5-1) AC15, 1.5 A/240 V (N/O contact)
AC15, 2 A/250 V (N/C contact)
DC13, 2 A/24 V (N/C contact)
DC13, 0.2 A/250 V (N/O contact)

Connection method Push-in connection
Stripping length 8 mm
Conductor cross section solid 0.14 mm² ... 1.5 mm²
Conductor cross section flexible 0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block)
Conductor cross section AWG 26 ... 16 (solid)
26 ... 16 (flexible)

Width 16 mm
Height 96 mm
Depth 75 mm
Drill hole
Diameter 3.2 mm

Flammability rating according to UL 94 V2 (Housing)

Ambient conditions
Degree of protection Relay base IP20 (Relay base)
Degree of protection Relay RT III (Relay)
Ambient temperature (operation) -40 °C ... 70 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C

Corrosive gas test
Identification ISA-S71.04. G3 Harsh Group
EN 60068-2-60

Standards/regulations IEC 60947-5-1

Mounting type DIN rail mounting
Assembly instructions in rows with zero spacing
Mounting position any

Tuotenumero 2903334
Pakkausyksikkö 10 Kappaletta
Vähimmäistilausmäärä 10 Kappaletta
Tuoteavain CK6529
Tuotekoodi CK6529
Luettelosivu Sivu 327 (C-5-2019)
GTIN 4046356732277
Paino kappaletta kohti (sis. pakkauksen) 69,38 g
Paino kappaletta kohti (ilman pakkausta) 64 g
Tullitariffinumero 85364110
Alkuperämaa DE


ECLASS

ECLASS-9.0 27371601
ECLASS-10.0.1 27371601
ECLASS-11.0 27371601

ETIM

ETIM 8.0 EC001437

UNSPSC

UNSPSC 21.0 39122300

EAC

Hyväksyntätunnus: TR_TS_D_00573_c

DNV GL

Hyväksyntätunnus: TAA000018V

DNV GL

Hyväksyntätunnus: TAA000018V

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Yhteensopivat tuotteet