SAC-4P-M12MSS/ 0,8-PUR PE - Power cable - 1036702

Product type	Power cable
Application	Energy supply
Number of positions	4
No. of cable outlets	1
Shielded	no
Coding	S
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Flammability rating according to UL 94	V0
Material of grip body	PP
Contact material	CuZn
Contact surface material	Ni/Au
Contact carrier material	PA
Material for screw connection	Zinc die-cast, nickel-plated

Insulation resistance	≥ 100 MΩ
Nominal voltage U_N	690 V AC
Nominal current I_N	12 A

Mechanical data
Insertion/withdrawal cycles	> 100

Connection 1
Type	Plug straight M12
Coding type	S (Power)
Connection 2
Type	free cable end

Cable length	0.8 m
PUR halogen-free black [PUR]
Cable weight	92 kg/km
UL AWM Style	80°C/1000 V
Number of positions	4
Shielded	no
Cable type	PUR halogen-free black [PUR]
Conductor structure, voltage supply	44x 0.20 mm
AWG power supply	16
Conductor cross section	4x 1.5 mm²
Wire diameter incl. insulation	2.35 mm ±0.05 mm
External cable diameter	7.40 mm ±0.25 mm
Outer sheath, material	PUR
External sheath, color	black-gray RAL 7021
Conductor material	Bare Cu litz wires
Material wire insulation	PP
Single wire, color	black 1, black 2, black 3, green/yellow
Thickness, insulation	≥ 0.31 mm
Thickness, outer sheath	approx. 0.85 mm
Overall twist	4 wires, twisted
Max. conductor resistance	≤ 14.1 Ω/km (at 20 °C)
Insulation resistance	≥ 1 GΩ*km (at 20 °C)
Nominal voltage, cable	≤ 1000 V AC
Test voltage	≥ 10000 V AC (Spark test)
Minimum bending radius, fixed installation	5 x D
Minimum bending radius, flexible installation	10 x D
Smallest bending radius, fixed installation	37 mm
Smallest bending radius, movable installation	74 mm
Dynamic load capacity (bending)	Max. bending cycles: 5000000, Bending radius: 10 x D, Traversing path: 10 m, Traversing rate: 3 m/s, Acceleration: 10 m/s²
Dynamic load capacity (torsion)	Torsion: ±180 °/m, Torsion cycles: 500000, Torsional frequency: 35 cycles/min.
Halogen-free	in accordance with DIN VDE 0472 part 815
Halogen-free		in accordance with DIN EN 50267-2-1
Flame resistance	According to UL 758/1581 (Cable Flame)
		in accordance with UL 758/1581 FT2
		according to DIN EN 60332-2-2
Resistance to oil	according to DIN EN 60811-404, 168 h at 100 °C
Resistance to oil		according to UL 758, 168 h at 60 °C
Other resistance	Hydrolysis and microbe resistant as per VDE 0282 section 10
		Low adhesion
		abrasion-resistant
		Resistant to salt water
Ambient temperature (operation)	-50 °C ... 85 °C (cable, fixed installation)
Ambient temperature (operation)		-30 °C ... 85 °C (Cable, flexible installation)

Ambient conditions
Degree of protection	IP65
Degree of protection		IP67 (without preloading, as additional test in accordance with IEC 60529)
Ambient temperature (operation) (male connector/female connector)	-25 °C ... 85 °C (Plug / socket)

Standard designation	M12 connector
Standards/specifications	IEC 61076-2-111

Tuotenumero	1036702
Pakkausyksikkö	1 Kappaletta
Vähimmäistilausmäärä	50 Kappaletta
Huomautus	Toimeksiantosidonnainen valmistus (ei palautusta)
Tuoteavain	AF1CCP
Tuotekoodi	AF1CCP
GTIN	4055626569505
Paino kappaletta kohti (sis. pakkauksen)	110 g
Paino kappaletta kohti (ilman pakkausta)	110 g
Tullitariffinumero	85444290
Alkuperämaa	DE

ECLASS-13.0	27060327
ECLASS-15.0	27060327

EU RoHS
Täyttää RoHS-direktiivin vaatimukset	Kyllä (Ei poikkeussäännöksiä)
China RoHS
Environment friendly use period (EFUP)	EFUP-E Ei raja-arvot ylittäviä vaarallisia aineita
EU REACH SVHC
Huomautus REACH-kandidaattiaineesta (CAS-nro)	Aineen pitoisuus ei ole yli 0,1 %.

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

SAC-4P-M12MSS/ 0,8-PUR PE - Power cable

1036702

Tuotetiedot

ECLASS

ETIM

UNSPSC

Yhteensopivat tuotteet

Edut

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

SAC-4P-M12MSS/ 0,8-PUR PE - Power cable 1036702

Tuotetiedot

ECLASS

ETIM

UNSPSC

Yhteensopivat tuotteet

PROT-M12 FS - Sealing cap 1560251

UCT-WMT (23X4) - Conductor marker 0801453

UC-WMT (23X4) - Conductor marker 0819411

US-WMT (23X4) - Cable marker 0828769

WMTW (23X4)R - Cable marker 0831004

PROT-M12 FS-PA-CHAIN - Sealing cap 1430873

WP-EC TPE HF 13,0 BK - Transition sleeve from hose to cable 3240975

WP-PA HF 13,0 BK - Protective hose 3240681

WP-PA HF-HB 13,0 BK - Protective hose 3240839

SAC BIT M12-D16 - Tool 1200305

TSD 04 SAC - Torque screwdriver 1208429

TSD-M 1,2NM - Torque screwdriver 1212224

TSD-M SAC-BIT ADAPTER - Adapter insert 1212600

B-STIFT - Marker pen 1051993

CUTFOX-S VDE - Diagonal cutter 1212207

WIREFOX-D 16 - Stripping tool 1212173

WIREFOX-D 40 - Stripping tool 1212161

WIREFOX 10 - Stripping tool 1212150

Edut

SAC-4P-M12MSS/ 0,8-PUR PE - Power cable

1036702