Sisällöt, joita tarkastelet, on räätälöity kohteelle Suomi. Tarkastele sisältöjä kohteesta Yhdysvallat | Valitse toinen maa

MCR-S-1-5-UI-SW-DCI-NC - Current measuring transducer

2814731

MCR current transducer, programmable and configurable, for measuring direct, alternating and distorted currents, with relay and transistor output, input current 0 ... 0.2 A to 0 ... 11 A, unconfigured

Maksuton lataus saatavilla. Ladattavat tiedostot

Tuotetiedot

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product type	Current measuring transducer
Insulation characteristics
Overvoltage category	III
Pollution degree	2

Total error	≤ 1.5 % (Temperature range)
Maximum power dissipation for nominal condition	2.2 W
Measuring category	III
Test voltage output/power supply	500 V AC (50 Hz, 60 s)
Test voltage input/output	4 kV AC (50 Hz, 60 s)
Test voltage input/power supply	4 kV AC (50 Hz, 60 s)
Protective circuit	Surge protection; 33 V suppressor diode
Step response (10-90%)	330 ms (AC)
	40 ms (DC)
Temperature coefficient, typical	< 0.025 %/K
Maximum transmission error	< 0.5 % (of nominal range value under nominal conditions)
Rated insulation voltage	300 V AC (to earth)
Supply
Supply voltage range	20 V DC ... 30 V DC
Max. current consumption	< 50 mA (without load)

Measurement
Number of inputs	3
Configurable/programmable	Yes, unconfigured
Input current range	0 A AC/DC ... 11 A AC/DC (Permitted continuous overload: 120%)
Measuring range	0 A AC/DC ... 1 A AC/DC
	0 A AC/DC ... 5 A AC/DC
	0 A AC/DC ... 10 A AC/DC
Setting range for min. input current	0 mA AC/DC ... 200 mA AC/DC
Setting range for max. input current	0 A AC/DC ... 11 A AC/DC
LSB: Current	1 µA (1 A)
	2 µA (2 A)
	5 µA (5 A)
	10 µA (10 A)
	50 µA (50 A)
	100 µA (100 A)
Overload capacity	2 x I_{N (}continuous)
Surge strength	20 x I_N (1 s)
Frequency measuring range	15 Hz ... 400 Hz
Curve type	AC, DC or distorted currents
Operate threshold	2 % (of measuring range nominal value 1/5/10 A)

Switching: Relay
Contact switching type	1 changeover contact
Contact material	AgSnO, hard gold-plated
Maximum switching voltage	30 V AC
	36 V DC
	250 V AC
Limiting continuous current	50 mA (for gold layer, 30 V AC/ 36 V DC)
	2 A (in case of a destroyed gold layer, 250 V AC)
Switching: Transistor
Continuous load current	80 mA (Not short-circuit proof)
Output voltage range	19 V ... 29 V (supply voltage - 1 V)
Setting range of the threshold value	1 % ... 110 %
Setting range of the response delay	0.1 s ... 20 s
Status display	LED (yellow)
Signal: Voltage/current
Configurable/programmable	Yes, unconfigured
Voltage output signal	0 V ... 5 V
	1 V ... 5 V
	0 V ... 10 V
	2 V ... 10 V
	-5 V ... 5 V
	-10 V ... 10 V
	10 V ... 0 V
	10 V ... 2 V
	10 V ... -10 V
	5 V ... 0 V
	5 V ... 1 V
	5 V ... -5 V
Current output signal	0 mA ... 20 mA
	4 mA ... 20 mA
	20 mA ... 0 mA
	20 mA ... 4 mA
Load/output load voltage output	> 10 kΩ
Load/output load current output	< 500 Ω

Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14

Status display	LED (green)

Item dimensions
Width	22.5 mm
Height	99 mm
Depth	114.5 mm

Color	green (RAL 6021)
Housing material	Polyamide PA non-reinforced

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-20 °C ... 60 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	< 2000 m
Permissible humidity (operation)	10 % ... 95 % (non-condensing)

CE
Certificate	CE-compliant
UL, USA/Canada
Identification	Class I, Zone 2, AEx nA nC IIC T4, Ex nA nC IIC T4 Gc X
	Class I, Div. 2, Groups A, B, C and D or Non-Hazardous Locations Only

Electromagnetic compatibility	Conformance with EMC directive
Low Voltage Directive	Conformance with Low Voltage Directive
Noise immunity	EN 61000-6-2
Noise emission
Standards/regulations	EN 61000-6-4

Standards/regulations	IEC 61010-2-030

Mounting type	DIN rail mounting
Mounting position	any

Kaupalliset tiedot

Tuotenumero	2814731
Pakkausyksikkö	1 Kappaletta
Vähimmäistilausmäärä	1 Kappaletta
Tuoteavain	CMMA33
Tuotekoodi	CMMA33
GTIN	4017918169282
Paino kappaletta kohti (sis. pakkauksen)	203,9 g
Paino kappaletta kohti (ilman pakkausta)	149,08 g
Tullitariffinumero	85437090
Alkuperämaa	DE

Luokitukset

Hyväksynnät

Environmental product compliance

Yhteensopivat tuotteet

Lisätarvikkeet

Edut

Device can be set via DIP switches or MCR/PI-CONF-WIN configuration software

3-way isolation

True r.m.s. value measurement

EU RoHS
Täyttää RoHS-direktiivin vaatimukset	Kyllä
poikkeussäännökset siltä osin kuin ne ovat tiedossa	6(c), 7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 Löydät tuotekohtaisen Kiinan RoHS-ilmoitusluettelon kunkin tuotteen latausalueelta Valmistajan ilmoitus -kohdasta. EFUP-E-merkinnän sisältäville tuotteille ei tarvita Kiinan RoHS-ilmoitusluetteloa, eikä sitä tarvitse siksi laatia.
EU REACH SVHC
Huomautus REACH-kandidaattiaineesta (CAS-nro)	Hexahydromethylphthalic anhydride (CAS-nro: Ei koske tätä tuotetta)
		Lead (CAS-nro: 7439-92-1)
		2,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol (CAS-nro: 79-94-7)
SCIP	559130c9-efe2-4ff8-9e29-a228cb04a43f

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

MCR-S-1-5-UI-SW-DCI-NC - Current measuring transducer

2814731

Tuotetiedot

ECLASS

ETIM

UNSPSC

cUL Recognized

UL Recognized

EAC

cUL Listed

UL Listed

Yhteensopivat tuotteet

Edut

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

MCR-S-1-5-UI-SW-DCI-NC - Current measuring transducer 2814731

Tuotetiedot

ECLASS

ETIM

UNSPSC

Yhteensopivat tuotteet

MCR-TTL-RS232-E - Adapter cable 2814388

CM-KBL-RS232/USB - Cable 2881078

Edut

MCR-S-1-5-UI-SW-DCI-NC - Current measuring transducer

2814731