CUC-MP-J1ST-A/2R4LT-THR-LED
-
RJ45 PCB connector
1337254
RJ45 PCB connector, number of positions: 8, 10 Gbps, material: Metal, connection method: THR reflow/THT wave
Detalii despre produs
| Product type | Data connector (device side) |
| Type | RJ45 |
| Number of positions | 8 |
| Connection profile | RJ45 |
| Type of packaging | Tape and Reel |
| [W] tape width | 56.00 mm |
| [A] coil diameter | 330.00 mm |
| [W2] coil overall dimension | 61.10 mm |
| Housing shield springs | Yes |
| Number of slots | 2 |
| Type | Socket |
| Shielded | yes |
| LED | yes |
| Insulation characteristics | |
| Overvoltage category | I |
| Degree of pollution | 2 |
| Rated voltage (III/2) | 72 V DC |
| Rated surge voltage | 1.5 kV DC |
| Rated surge voltage (III/3) | 1.5 kV |
| Rated surge voltage | 1 kV DC |
| Rated current | 1.5 A |
| Frequency range | 10 Hz ... 500 Hz |
| Insulation resistance | > 500 MΩ |
| Test voltage | 1 kV DC |
| Test voltage Core/Core | 1 kV DC |
| Test voltage Core/Shield | 1.50 kV DC |
| Transmission medium | Copper |
| Transmission speed | 10 Gbps |
| Power transmission | PoE++ |
| Connection technology | |
| Connection method | THR reflow/THT wave |
| Status display | 4 x LED (green, yellow) |
| Status display present | yes |
| Width | 35.5 mm |
| Height | 18.2 mm |
| Length | 16.5 mm |
| Installed height | 13.60 mm |
| Orientation to PCB | 90.00 ° |
| Data pin length | 2.00 mm |
| Material Metal surface contact area (top layer) | Au (1.27 µm/50 µ") (Metal surface contact area (top layer)) |
| Material Metal surface soldering area (top layer) | Sn (2.54 µm/100 µ") |
| Material Metal surface soldering area (middle layer) | Ni (1.27 µm/50 µ") |
| Material Metal surface contact area (middle layer) | Ni (1.27 µm/50 µ") |
| Material | Stainless steel (Housing (shielding)) |
| LCP (Housing (female/insert)) | |
| Flammability rating according to UL 94 | V0 |
| Housing material | Metal |
| Contact material | Phosphor bronze |
| Contact surface material | Gold over nickel |
| Contact carrier material | LCP |
| Test voltage Core/Core | 1 kV DC |
| Test voltage Core/Shield | 1.50 kV DC |
| Halogen-free | yes |
| Mechanical data | |
| Insertion/withdrawal cycles | > 750 |
| Insertion force per signal contact | < 20.00 N |
| Extraction force per signal contact | < 20 N |
| Test specification | |
| Frequency | 10-500 Hz |
| Sweep speed | 1 octave/min |
| Amplitude | 0.35 mm |
| Acceleration | 50.00 m/s² |
| Test duration | 20.00 s |
| Test specification | |
| Specification | IEC60068-2-27 |
| Acceleration | 295.00 m/s² |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -50 °C ... 85 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Mounting type | PCB mounting |
| Processing notes | |
| Process | THR |
| Moisture Sensitive Level | MSL 1 |
| Classification temperature Tc | 260 °C |
| Solder cycles in the reflow | 3 |
| Dimensional drawing |
|
| Type of packaging | Tape and Reel |
| [W] tape width | 56 mm |
| [W2] coil overall dimension | 61.1 mm |
| [A] coil diameter | 330 mm |
| Outer packaging type | Transparent-Bag |
Avantajele dumneavoastră
The right version for every application. Available with and without LED, single- and multi-port
The reflow capability enables efficient, cost-optimized processing
High standoffs allow ideal thermal airflow during processing
Tape-on-reel packaging is perfect for automated processing
The extended temperature range from -50 °C ... +85 °C enables use in demanding applications
Through-hole technology (THT) provides high mechanical stability when connecting the female connector to the PCB