CHARX PT1H-DC500-6,0MEC00P - DC charging cable

1851395

CHARX connect professional, CCS type 1, HPC DC charging cable, up to 700 A in Boost mode, 500 A permanent, 1000 V DC, with cooled vehicle charging connector and cooled cable, cable: 6 m, black, straight, with charging connector holder, with replaceable mating face frame, without panel feed-through, with digital temperature sensors, Liquid cooling, PHOENIX CONTACT logo, SAE J1772, IEC 62196-3-1, for charging electric vehicles (EV) with direct current (DC)

Detalii despre produs

Descriere produs

Date tehnice

Product properties

Product family	CHARX connect professional
Technology	Combined Charging System
	High Power Charging
Application	for charging electric vehicles (EV) with direct current (DC)
	for installation at charging stations for electromobility (EVSE)
Design	with charging connector holder
	with replaceable mating face frame
	without panel feed-through
	with digital temperature sensors
	Liquid cooling
Charging standard	CCS type 1
Charging mode	DC level 3
Affixed logo	PHOENIX CONTACT logo
Label	8.9 mm x 28.9 mm (customer logo on request)

Electrical properties

Charging power and current (DC charging)
Type of charging current	DC
Charging current	500 A DC
Charging power	500 kW
Rated voltage	1000 V
Charging power and current (DC charging in Boost Mode)
Type of charging current	DC Boost Mode
Charging current	up to 700 A DC
Charging power	up to 700 kW
Rated voltage	1000 V
Note	The specifications refer to charging in Boost Mode and are dependent on ambient conditions. For further details, see the packing slip in the download area.
Charging power and current (DC charging in the event of cooling unit failure)
Charging current	150 A DC
Charging power	150 W
Rated voltage	1000 V
Note	The specifications refer to charging with a defective cooling unit and a short charging process.
Pin assignment (Power contacts)
Number	3 (PE, DC+, DC-)
Rated voltage	1000 V DC
Rated current	500 A
Pin assignment (Signal contacts)
Rated voltage	30 V AC
Rated current	2 A
Temperature sensors (NTC)
Sensor type	NTC
Attachment point	2 sensors for the replaceable front DC contacts
		2 sensors for the internal DC power wires
		1 sensor on the PCB in the housing
Switch-off temperature	90 °C
Cooling system (Cooling unit)
Cooling	in the vehicle charging connector and in the cable
Coolant	50% water, 50% glycol (Glysofor N)
Cooling hose diameter	1x 11.50 mm Supply hose
Cooling hose diameter		2x 8.80 mm Return hoses
Cooling capacity	600 W (Cable length: 3 m)
		800 W (Cable length: 4 m)
		900 W (Cable length: 5 m)
		1050 W (Cable length: 6 m)
Flow rate	2 l/min
Operating pressure	1.00 bar ... 2.00 bar
Relief pressure	2.00 bar
Maximum permissible pressure	4.00 bar
Flow-in temperature	15 °C

Dimensions

Vehicle charging connector
Width	69.6 mm
Height	192.6 mm
Depth	284.6 mm

Material specifications

Color (Housing)	black (9005)
Color (Handle area)	black (9005)
Color (Mating face)	black (9005)
Color (Cable)	black (9005)
Material (Vehicle charging connector)	Plastic
Material (Cable outer sheath)	EVM-1 in accordance with EN 50620
Material (Contact surface)	Silver
Note	The color appearance and gloss level of the charging cable may vary.
Flammability rating according to UL 94	V0 (Mating face)

Cable/line

Cable length	6 m ±45 mm
Wiring standards/regulations	according to UL 62 (File E515623, Vol 1)
	according to IEC 62893
Cable weight	max. 1938.00 kg/km
Cable type	straight
Cable structure	5 x 25 mm² + 7 x 0,75 mm² + 2 x 13 mm²
External cable diameter	35.70 mm ±0.4 mm
Outer sheath, material	TPE-U in accordance with IEC 62893-1
Stripping length of the sheath	250 mm ±5 mm
Stripping length	250 mm ±5 mm
Cable resistance	≤ 0.00078 Ω/m (based on a power core, at an ambient temperature of 20°C)
Bending radius	min. 357 mm (10x Ø)

Mechanical properties

Coolant	50% water, 50% glycol (Glysofor N)
Mechanical data
Insertion/withdrawal cycles	> 10000 (based on IEC 62196-1)
Insertion force	< 75 N
Withdrawal force	< 75 N

Environmental and real-life conditions

Ambient conditions
Degree of protection (Vehicle charging connector)	IP54 / Type 3R (The degree of protection is only ensured in the ready and plugged-in state when both plug-in components are original products from Phoenix Contact or suitable standard-compliant products.)
Ambient temperature (operation)	-30 °C ... 40 °C
	max. 55 °C (Current reduction required, observe the DC contact temperature limit value of 90°C)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	5000 m (above sea level)

Standards and regulations

Standards
Standards/regulations	SAE J1772
	IEC 62196-3-1

Date comerciale

Număr articol	1851395
Unitate de ambalare	1 Bucată
Cantitate minimă pentru comandă	1 Bucată
Cod produs	XWBLPI
GTIN	4067923507050
Greutate pe bucată (inclusiv ambalajul)	13.000 g
Greutate pe bucată (fără ambalaj)	13.000 g
Cod tarifar vamal	85444290
Țara de origine	Informațiile privind țara de origine sunt furnizate odată cu livrarea.

Clasificări

Aprobări

Approval Specification Data
	Tensiune nominală U_N	Curent nominal I_N	Secțiune transversală AWG	Secțiune transversală mm²
keine
	1000 V	500 A

Environmental product compliance

Produse compatibile

Accesorii

Avantajele dumneavoastră

Complete product range

The right charging cable for every application, from the carport to the charging park

Ultra-fast HPC charging, with temporary power up to 500 kW

Convenient handling due to the ergonomic design

Available with your logo on request - for consistent branding of your charging station

Developed and produced in accordance with the IATF 16949 automotive standard and ISO 9001

Additional safety thanks to integrated leakage sensors and a wear indicator in the cable sheath

Convenient communication interfaces via CAN bus and digital output

Maintenance-friendly replacement of the mating face frame without draining the coolant

ECLASS-15.0	27144705
ECLASS-13.0	27144705

EU RoHS
Îndeplineşte cerinţele conform directivei RoHS	Da
reglementări excepţionale, dacă sunt cunoscute	6(c), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-10 Un tabel de declarații China RoHS legat de articol poate fi găsit în zona de descărcare a articolului respectiv la „Declarația producătorului”. Nu se emite și nu este necesar niciun tabel de declarații China RoHS pentru toate articolele EFUP-E.
EU REACH SVHC
Trimitere la substanţa candidată REACH (nr. CAS)	Lead (nr. CAS: 7439-92-1)

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

CHARX PT1H-DC500-6,0MEC00P - DC charging cable

1851395

Detalii despre produs

ECLASS

ETIM

cULus Recognized

Produse compatibile

Avantajele dumneavoastră

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

CHARX PT1H-DC500-6,0MEC00P - DC charging cable 1851395

Detalii despre produs

ECLASS

ETIM

Produse compatibile

EV-T1CCS-PARK - Charging connector holder 1624143

EV-T1CCS-MF-M4X10-BIT-CTS - Repair kit 1085802

EV-T1CCS-MF-M4X10-CTS - Repair kit 1281251

EV-T1CCS-MF-M4X10-BIT - Repair kit 1085801

EV-T1CCS-MF-M4X10 - Repair kit 1085800

EV-T1CCS-M4X20-BIT-CTS - Repair kit 1295723

EV-T1CCS-M4X20-CTS - Repair kit 1295744

EV-GRIP-D35,7MM - Cable handle 1091431

G-INS-M63-L68L-PNES-BK - Cable gland 1411139

EV-HPC-PCU-01 - Cooling unit 1237881

EV-HPC-QC - Quick coupling 1346562

EV-HPC-QCEP - Quick coupling 1583923

CHARX PS/3AC/920DC/87.5KW - DC power module 1162690

CHARX PS-M2/3AC/1000DC/30KW - DC power module 1232243

CHARX PS-M2/825DC/1000DC/30KW - DC power module 1296467

XPC 1,5/ 8-ST-3,5 BK - PCB connector 1464111

SPTD 1,5/ 8-H-3,5 - PCB terminal block 1841555

EV-LABEL-K - Label 1309761

EV-LABEL-L - Label 1309765

Avantajele dumneavoastră

CHARX PT1H-DC500-6,0MEC00P - DC charging cable

1851395