PLC-OPT-110DC/110DC/3RW
   - 
  Solid-state relay module
    
      2900396
      
      
    
  
      PLC-INTERFACE for railway applications, consisting of basic terminal block with push-in connection and integrated miniature solid-state relay, range: 0.7 x UN to 1.25 x UN, temperature range: -25°C to +70°C, 1 N/O contact, input: 110 V DC, output: 12 - 140 V DC/3 A
Tuotetiedot
| Product type | Solid-state relay module | 
| Product family | PLC-INTERFACE | 
| Application | Railway applications | 
| Operating mode | 100% operating factor | 
| Insulation characteristics: Air clearances and creepage distances, input/output | |
| Insulation | Basic insulation | 
| Overvoltage category | III | 
| Pollution degree | 2 | 
| Data management status | |
| Date of last data management | 15.09.2025 | 
| Maximum power dissipation for nominal condition | 0.6 W | 
| Test voltage (Input/output) | 2.5 kV AC (Input/output) | 
| Air clearances and creepage distances, input/output | |
| Rated insulation voltage | 160 V | 
| Rated surge voltage | 4 kV | 
| Nominal input voltage UN | 110 V DC | 
| Input voltage range in reference to UN | 0.7 ... 1.25 (t < 1 s = 0.6 ... 1.4 x UN) | 
| Input voltage range | 77 V DC ... 137.5 V DC | 
| Switching threshold "0" signal in reference to UN | < 0.3 | 
| Switching threshold "1" signal in reference to UN | > 0.6 | 
| Typical input current at UN | 5.5 mA | 
| Typical response time | 400 µs | 
| Typical turn-off time | 800 µs | 
| Operating voltage display | Yellow LED | 
| Protective circuit | Reverse polarity protection; Series polarity protection diode | 
| Surge protection | |
| Surge voltage protection | > 150 V | 
| Transmission frequency | 50 Hz | 
| Contact switching type | 1 N/O contact | 
| Design of digital output | electronic | 
| Output nominal voltage | 110 V DC | 
| Output voltage range | 12 V DC ... 140 V DC (t < 1 s = 1.40 x UN) | 
| Limiting continuous current | 3 A (see derating curve) | 
| Surge voltage protection | > 150 V | 
| Voltage drop at max. limiting continuous current | < 150 mV | 
| Output circuit | 2-conductor, floating | 
| Protective circuit | Reverse polarity protection; Parallel polarity protection diode | 
| Surge protection | 
| Connection method | Push-in connection | 
| Stripping length | 10 mm | 
| Conductor cross-section rigid | 0.14 mm² ... 2.5 mm² | 
| Conductor cross-section flexible | 0.14 mm² ... 2.5 mm² | 
| 0.2 mm² ... 2.5 mm² (Single ferrule) | |
| 2x 0.5 mm² ... 1 mm² (TWIN ferrule) | |
| Conductor cross-section AWG | 26 ... 14 | 
| Width | 6.2 mm | 
| Height | 80 mm | 
| Depth | 94 mm | 
| Color | gray (RAL 7042) | 
| Flammability rating according to UL 94 (Housing) | V0 (Housing) | 
| Ambient conditions | |
| Degree of protection | IP20 | 
| Ambient temperature (operation) | -25 °C ... 70 °C | 
| Ambient temperature (storage/transport) | -40 °C ... 85 °C | 
| CE | |
| Certificate | CE-compliant | 
| UKCA | |
| Certificate | UKCA-compliant | 
| Corrosive gas test | |
| Identification | ISA-S71.04. G3 Harsh Group | 
| EN 60068-2-60 | |
| Shipbuilding approval | |
| Certificate | TAE0000196 | 
| Shipbuilding data | |
| Temperature | D | 
| Humidity | A | 
| Vibration | B | 
| EMC | B | 
| Enclosure | Required protection according to the Rules shall be provided upon installation on board | 
| Electromagnetic compatibility | Conformance with EMC directive | 
| Low Voltage Directive | Conformance with Low Voltage Directive | 
| Air clearances and creepage distances, input/output | |
| Standards/regulations | IEC 60947-5-1 | 
| Railway standard | |
| Standards/regulations | DIN EN 50155 (in relevant parts) | 
| Standards/regulations | DNVGL-CG-0339 | 
| Mounting type | DIN rail mounting | 
| Assembly note | in rows with zero spacing | 
| Mounting position | any | 
| Tuotenumero | 2900396 | 
| Pakkausyksikkö | 10 Kappaletta | 
| Vähimmäistilausmäärä | 1 Kappaletta | 
| Tuoteavain | DK62AL | 
| Tuotekoodi | DK62AL | 
| GTIN | 4046356506953 | 
| Paino kappaletta kohti (sis. pakkauksen) | 35,77 g | 
| Paino kappaletta kohti (ilman pakkausta) | 35,77 g | 
| Tullitariffinumero | 85364900 | 
| Alkuperämaa | DE | 
ECLASS
| ECLASS-13.0 | 27371604 | 
| ECLASS-15.0 | 27371604 | 
ETIM
| ETIM 9.0 | EC001504 | 
UNSPSC
| UNSPSC 21.0 | 39122300 | 
| EU RoHS | |
| Täyttää RoHS-direktiivin vaatimukset | Kyllä | 
| poikkeussäännökset siltä osin kuin ne ovat tiedossa | 7(a), 7(c)-I | 
| China RoHS | |
| Environment friendly use period (EFUP) | EFUP-50 Löydät tuotekohtaisen Kiinan RoHS-ilmoitusluettelon kunkin tuotteen latausalueelta Valmistajan ilmoitus -kohdasta. EFUP-E-merkinnän sisältäville tuotteille ei tarvita Kiinan RoHS-ilmoitusluetteloa, eikä sitä tarvitse siksi laatia. | 
| EU REACH SVHC | |
| Huomautus REACH-kandidaattiaineesta (CAS-nro) | Lead (CAS-nro: 7439-92-1) | 
| SCIP | 91643e16-240c-4ad4-a6b4-1cad9fb93915 | 
Yhteensopivat tuotteet
            Huomautus: Joidenkin alla mainittujen lisäosien käyttö voi rajoittaa tämän tuotteen ominaisuuksia.
          
          
        - 
    
      FBST 500-PLC RD - Continuous plug-in bridge 2966786
- 
    
      FBST 500-PLC BU - Continuous plug-in bridge 2966692
- 
    
      FBST 500-PLC GY - Continuous plug-in bridge 2966838
- 
    
      FBST 6-PLC RD - Single plug-in bridge 2966236
- 
    
      FBST 6-PLC BU - Single plug-in bridge 2966812
- 
    
      FBST 6-PLC GY - Single plug-in bridge 2966825
- 
    
      FBST 8-PLC GY - Single plug-in bridge 2967688
- 
    
      NS 35/ 7,5 PERF 2000MM - DIN rail perforated 0801733
- 
    
      NS 35/ 7,5 UNPERF 2000MM - DIN rail, unperforated 0801681
- 
    
      NS 35/ 7,5 WH PERF 2000MM - DIN rail perforated 1204119
- 
    
      NS 35/ 7,5 WH UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1204122
- 
    
      NS 35/ 7,5 AL UNPERF 2000MM - DIN rail, unperforated 0801704
- 
    
      NS 35/ 7,5 ZN PERF 2000MM - DIN rail perforated 1206421
- 
    
      NS 35/ 7,5 ZN UNPERF 2000MM - DIN rail, unperforated 1206434
- 
    
      NS 35/ 7,5 CU UNPERF 2000MM-VPE 10 - DIN rail, unperforated 0801762
- 
    
      NS 35/ 7,5 CAP - End cap 1206560
- 
    
      NS 35/15 PERF 2000MM - DIN rail perforated 1201730
- 
    
      NS 35/15 UNPERF 2000MM - DIN rail, unperforated 1201714
- 
    
      NS 35/15 WH PERF 2000MM - DIN rail perforated 0806602
- 
    
      NS 35/15 WH UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1204135
- 
    
      NS 35/15 AL UNPERF 2000MM - DIN rail, unperforated 1201756
- 
    
      NS 35/15 ZN PERF 2000MM - DIN rail perforated 1206599
- 
    
      NS 35/15 ZN UNPERF 2000MM - DIN rail, unperforated 1206586
- 
    
      NS 35/15 CU UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1201895
- 
    
      NS 35/15 CAP - End cap 1206573
- 
    
      NS 35/15-2,3 UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1201798
- 
    
      PLC-ATP BK - Separating plate 2966841
- 
    
      PLC-ESK GY - Power terminal block 2966508
- 
    
      SZF 1-0,6X3,5 - Screwdriver 1204517
Edut
Shock resistance in accordance with DIN 50155 (requirements in accordance with EN 61373)
        Temperature range: -25 °C ... +70 °C
        Input voltage range of 0.7 - 1.25 x UN
        PHOENIX CONTACT OY
        
        Niittytie 11, 01300 Vantaa