Sample set, Universal, 4-position, Pin, straight, M12, coding: T, PCB mounting, THR solder connection, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb < 0.1 %)
Tuotetiedot
Notes on operation
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Product type
Contact insert
Application
Power
Sensor type
Universal
Number of positions
4
No. of cable outlets
1
Shielded
yes
Coding
T
Thread type
M12
Insulation characteristics
Overvoltage category
III
Degree of pollution
3
Rated voltage in acc. with IEC 61076-2-101
630 V
Rated surge voltage
1.5 kV
Contact resistance
≤ 3 mΩ
Insulation resistance
≥
Nominal voltage UN
60 V
Nominal current IN
12 A
Connection method
THR solder connection
Signal type/category
Universal
Flammability rating according to UL 94
V0
Seal material
FKM
Contact material
CuZn
Contact surface material
Au
Contact carrier material
PA
Connection 1
Head design
Pin
Head cable outlet
straight
Head thread type
M12
Coding
T
Signal type/category
Universal
Ambient temperature (operation)
-40 °C ... 105 °C (cable, fixed installation)
-25 °C ... 105 °C (Cable, flexible installation)
Mechanical data
Insertion/withdrawal cycles
> 100
Ambient conditions
Degree of protection
IP67
IP67
Ambient temperature (operation) (male connector/female connector)
-25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)
Ambient temperature (operation) (Cable, flexible installation)
-25 °C ... 105 °C (Cable, flexible installation)
Ambient temperature (operation) (Cable, fixed installation)
