Relay Module - RIF-0-RPT-24DC/21

Pre-assembled relay modules with Push-in connection, consisting of: relay base with ejector and power contact relay. Contact type: 1 changeover contact. Input voltage: 24 V DC


The pluggable electromechanical and solid-state relays in the RIFLINE complete product range and the base are recognized and approved in accordance with UL 508. The relevant approvals can be called up at the individual components in question.

Product type Relay Module
Application Universal
Operating mode 100% operating factor
Mechanical service life approx. 2x 107 cycles
Insulation characteristics
Overvoltage category III
Pollution degree 2
Insulation safe isolation

Service life electrical see diagram
Maximum power dissipation for nominal condition 0.22 W
Test voltage Winding/contact 4 kVrms (50 Hz, 1 min., winding/contact)
Rated insulation voltage 250 V AC
Rated surge voltage 6 kV

Coil side
Nominal input voltage UN 24 V DC
Input voltage range 19.2 V DC ... 36 V DC (20 °C)
Input voltage range in reference to UN see diagram
Typical input current at UN 9 mA
Typical response time 5 ms
Typical release time 8 ms
Coil voltage 24 V DC
Protective circuit Freewheeling diode
Operating voltage display Yellow LED

Contact type 1 changeover contact
Type of switch contact Single contact
Drive and function monostable
Drive (polarity) bipolar
Contact material AgSnO
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (100 mA)
Limiting continuous current 6 A
Maximum inrush current 10 A (4 s)
Min. switching current 10 mA (12 V)
Interrupting rating (ohmic load) max. 140 W (24 V DC)
20 W (48 V DC)
18 W (60 V DC)
23 W (110 V DC)
40 W (220 V DC)
1500 VA (250 V AC)
Utilization category CB Scheme (IEC 60947-5-1) AC15, 3 A/250 V (N/O contact)
AC15, 1 A/250 V (N/C contact)
DC13, 1.5 A/24 V (N/O contact)
DC13, 0.2 A/110 V (N/O contact)
DC13, 0.1 A/220 V (N/O contact)

Connection method Push-in connection
Stripping length 8 mm
Conductor cross section solid 0.14 mm² ... 1.5 mm²
Conductor cross section flexible 0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
Conductor cross section AWG 24 ... 16

Width 6.2 mm
Height 93 mm
Depth 78 mm

Flammability rating according to UL 94 V2 (Housing)

Ambient conditions
Degree of protection Relay base IP20 (Relay base)
Degree of protection Relay RT III (Relay)
Ambient temperature (operation) -40 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C

Corrosive gas test
Identification ISA-S71.04. G3 Harsh Group
EN 60068-2-60

Standards/regulations IEC 60947-5-1

Mounting type DIN rail mounting
Assembly instructions in rows with zero spacing
Mounting position any

Tuotenumero 2903370
Pakkausyksikkö 10 Kappaletta
Vähimmäistilausmäärä 10 Kappaletta
Tuoteavain CK6528
Tuotekoodi CK6528
Luettelosivu Sivu 318 (C-5-2019)
GTIN 4046356731942
Paino kappaletta kohti (sis. pakkauksen) 27,78 g
Paino kappaletta kohti (ilman pakkausta) 24,2 g
Tullitariffinumero 85364110
Alkuperämaa CN


ECLASS-9.0 27371601
ECLASS-10.0.1 27371601
ECLASS-11.0 27371601


ETIM 8.0 EC001437


UNSPSC 21.0 39122300


Hyväksyntätunnus: TR_TS_D_00573_c


Hyväksyntätunnus: TAA000018V


Hyväksyntätunnus: TAA000018V

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Yhteensopivat tuotteet