IB IL 24 DO16-2MBD-PAC - Digital module

2862013

Inline, Digital output terminal, Digital outputs: 16, 24 V DC, 500 mA, connection technology: 3-conductor, transmission speed in the local bus: 2 Mbps, degree of protection: IP20, including Inline connectors and marking fields

Width	48.8 mm
Height	140.5 mm
Depth	71.5 mm
Note on dimensions	Housing dimensions

Note on application
Note on application	Only for industrial use

Inline local bus
Number of interfaces	2
Connection method	Inline data jumper
Transmission speed	2 Mbps

Module
ID code (dec.)	189
ID code (hex)	BD
Length code (hex)	01
Length code (dec)	01
Process data channel	16 bit
Input address area	0 Byte
Output address area	2 Byte
Register length	16 bit
Required parameter data	4 Byte
Required configuration data	4 Byte

Digital:
Output name	Digital outputs
Connection method	Spring-cage connection
Connection technology	3-conductor
Number of outputs	16
Protective circuit	Overload protection, short-circuit protection of outputs
Output voltage	24 V DC (U_S - 1 V)
Output current	max. 500 mA (per channel)
	max. 8 A (Device)
Nominal output voltage	24 V DC
Output voltage when switched off	max. 2 V
Output current when switched off	max. 300 µA
Nominal load, inductive	12 W (1.2 H, 48 Ω)
Nominal load, lamp	12 W
Nominal load, ohmic	12 VA (48 Ω)
Maximum operating frequency with ohmic nominal load	max. 300 Hz (this switching frequency is limited by the data rate selected, the number of bus devices, the structure of the bus, the software used and the control or computer system used)
Behavior with overload	Auto restart
Behavior with inductive overload	Output can be destroyed
Behavior at voltage switch-off	The output follows the power supply without delay
Overcurrent shut-down	min. 0.7 A
Output current with ground connection interrupt when switched off	max. 25 mA

Product type	I/O component
Product family	Inline
Type	modular
Scope of supply	including Inline connectors and marking fields
No. of channels	16
Operating mode	Process data mode with one word
Diagnostics messages	Short-circuit or overload of the digital outputs Error message in the diagnostic code (bus) and display (2 Hz) via the LED (D) on the module
Insulation characteristics
Overvoltage category	II (IEC 60664-1, EN 60664-1)
Pollution degree	2 (IEC 60664-1, EN 60664-1)

Maximum power dissipation for nominal condition	3.6 W
Potentials: Communications power (U_L)
Supply voltage	7.5 V DC (via voltage jumper)
Current draw	max. 105 mA
Potentials: Segment circuit supply (U_S)
Supply voltage	24 V DC (via voltage jumper)
Supply voltage range	19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw	max. 8 A
Electrical isolation/isolation of the voltage ranges
Test voltage: 5 V supply, incoming remote bus/7.5 V supply (bus logics)	500 V AC, 50 Hz, 1 min
Test voltage: 5 V supply, outgoing remote bus/7.5 V supply (bus logics)	500 V AC, 50 Hz, 1 min
Test voltage: 7.5 V supply (bus logics)/24 V supply (I/O)	500 V AC, 50 Hz, 1 min
Test voltage: 24 V supply (I/O) / functional ground	500 V AC, 50 Hz, 1 min

Connection technology
Connection name	Inline connector
Conductor connection
Connection method	Spring-cage connection
Conductor cross-section rigid	0.08 mm² ... 1.5 mm²
Conductor cross-section flexible	0.08 mm² ... 1.5 mm²
Conductor cross-section AWG	28 ... 16
Stripping length	8 mm
Inline connector
Connection method	Spring-cage connection
Conductor cross-section, rigid	0.08 mm² ... 1.5 mm²
Conductor cross-section, flexible	0.08 mm² ... 1.5 mm²
Conductor cross-section AWG	28 ... 16
Stripping length	8 mm

Ambient conditions
Ambient temperature (operation)	-25 °C ... 55 °C
Degree of protection	IP20
Air pressure (operation)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)	-25 °C ... 85 °C
Permissible humidity (operation)	10 % ... 95 % (according to DIN EN 61131-2)
Permissible humidity (storage/transport)	10 % ... 95 % (according to DIN EN 61131-2)

Protection class	III (IEC 61140, EN 61140, VDE 0140-1)

Mounting type	DIN rail mounting

Tuotenumero	2862013
Pakkausyksikkö	1 Kappaletta
Vähimmäistilausmäärä	1 Kappaletta
Tuoteavain	DRI132
Tuotekoodi	DRI132
GTIN	4017918974657
Paino kappaletta kohti (sis. pakkauksen)	231,7 g
Paino kappaletta kohti (ilman pakkausta)	202,6 g
Tullitariffinumero	85389091
Alkuperämaa	DE

Yhteensopivat tuotteet

Lisätarvikkeet

Edut

16 digital outputs

Connection of actuators in 2- and 3-conductor technology

Nominal current per output: 500 mA

Total current of the terminal: 8 A

Short-circuit and overload-protected outputs

Diagnostic and status indicators

ECLASS-13.0	27242604
ECLASS-15.0	27242604

EU RoHS
Täyttää RoHS-direktiivin vaatimukset	Kyllä
poikkeussäännökset siltä osin kuin ne ovat tiedossa	7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-E Ei raja-arvot ylittäviä vaarallisia aineita
EU REACH SVHC
Huomautus REACH-kandidaattiaineesta (CAS-nro)	Lead (CAS-nro: 7439-92-1)
SCIP	9d44b3f1-af72-4512-8c8a-78dbf6b4897b

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

IB IL 24 DO16-2MBD-PAC - Digital module

2862013

Tuotetiedot

ECLASS

ETIM

UNSPSC

cULus Listed

Yhteensopivat tuotteet

Edut

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

IB IL 24 DO16-2MBD-PAC - Digital module 2862013

Tuotetiedot

ECLASS

ETIM

UNSPSC

Yhteensopivat tuotteet

IB IL SCN-12-OCP - Inline connector 2727624

FLKM 14-PA-INLINE/OUT16 - Front adapter 2302764

IL CP - Coding star 2742683

IB IL FIELD 8 - Marking field 2727515

EMT (62X46)R - Insert label 0800059

IB IL FIELD 2 - Marking field 2727501

EMT (62X10)R - Insert label 0800057

ZBF 6:UNBEDRUCKT - Zack Marker strip, flat 0808710

UCT-TMF 6 - Marker for terminal blocks 0828746

UC-TMF 6 - Marker for terminal blocks 0818140

ZBF 12:UNBEDRUCKT - Zack Marker strip, flat 0809735

UCT-TMF 12 - Marker for terminal blocks 0829214

UC-TMF 12 - Marker for terminal blocks 0819233

Edut

IB IL 24 DO16-2MBD-PAC - Digital module

2862013