The Inline adapter terminal (INTERBUS master) is designed to be aligned to the right of an Axiocontrol series PLCnext Control device. The Inline adapter terminal can be used to set up an Inline station for PLCnext Technology and to integrate INTERBUS devices.
AXC F IL ADAPT
-
PLC extension module
1020304
Right-alignable Inline adapter terminal (INTERBUS master) for one PLCnext Control device for setting up a PLCnext Technology Inline station
Maksuton lataus saatavilla.
Ladattavat tiedostot
Tuotetiedot
| Dimensional drawing |
|
| Width | 12.2 mm |
| Height | 119.8 mm |
| Depth | 71.5 mm |
| Note on application | |
| Note on application | Only for industrial use |
| Inline local bus | |
| Number of interfaces | 1 |
| Connection method | Inline data jumper |
| INTERBUS local bus (master) | |
| Number of interfaces | 1 |
| Connection method | Inline data jumper |
| Transmission physics | Copper |
| Supported controllers | AXC F 2152 |
| System limits | |
| Number of local bus devices that can be connected | max. 63 (observe current consumption) |
| Number of devices with parameter channel | max. 24 |
| Number of supported branch terminals with remote bus branch | - 0 (INTERBUS remote bus not supported) |
| Product type | I/O component |
| Product family | PLCnext Control Extension |
| Type | modular |
| Diagnostics messages | Bus error in INTERBUS yes |
| Peripheral fault in INTERBUS yes |
| Maximum power dissipation for nominal condition | 0.77 W |
| Potentials | |
| Protective circuit | Polarity reversal protection of the supply voltage; Polarity protection diode |
| Transient protection; Suppressor diode | |
| Potentials: 24 V supply UILC | |
| Supply voltage | 24 V DC -15 % / +20 % (in accordance with EN 61131-2) |
| Current draw | 20 mA |
| Potentials: 7.5 V communications power UL (potential jumper) | |
| Supply voltage | 7.5 V DC ±5 % |
| Potentials: 24 V analog supply UANA (potential jumper) | |
| Supply voltage | 24 V DC -15 % / +20 % |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Potentials: 24 V main supply UM | |
| Supply voltage | 24 V DC -15 % / +20 % (in accordance with EN 61131-2) |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Potentials: 24 V segment supply US | |
| Supply voltage | 24 V DC -15 % / +20 % (in accordance with EN 61131) |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Supply: Module electronics | |
| Current consumption | 20 mA |
| Connection technology | |
| Connection name | Inline connector |
| Conductor connection | |
| Connection method | Spring-cage connection |
| Conductor cross section rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross section flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross section AWG | 28 ... 16 |
| Stripping length | 8 mm |
| Inline connector | |
| Connection method | Spring-cage connection |
| Conductor cross section, rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross section, flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross section AWG | 28 ... 16 |
| Stripping length | 8 mm |
| Ambient conditions | |
| Ambient temperature (operation) | -25 °C ... 55 °C |
| Degree of protection | IP20 |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 10 kPa ... 106 kPa (up to 3000 m above sea level) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
| UL, USA/Canada | |
| Identification | cULus |
| Certificate | E238705 |
| Mounting type | DIN rail mounting |
| DIN rail mounting |
LR
Hyväksyntätunnus: LR2480202TA-02RINA
Hyväksyntätunnus: ELE008423XGABS
Hyväksyntätunnus: 20-1968571-PDABSH
Hyväksyntätunnus: 840cULus Listed
Hyväksyntätunnus: E238705cULus Listed
Hyväksyntätunnus: E366272
Edut
Automatic detection of the transmission speed in INTERBUS (500 kbps or 2 Mbps)
Up to 63 INTERBUS local bus devices can be connected
Diagnostic and status indicators
Inline I/O adapter terminal specifically developed for all PLCnext Control devices of the Axiocontrol series
A variety of functional I/Os creates options for flexible automation solutions
Convert existing machines and systems to the new, open PLCnext Technology ecosystem