HC-EVO-M1-HHFS-PLBK
-
Housing
1424436
Sleeve housing, plastic, with bayonet flange for EVO-D screw connection, M1, for single locking latch, for modular contact inserts with single module width, without EVO screw connection
Tuotetiedot
| General | for single module width modular contact inserts from the HEAVYCON modular system |
| Product type | Housing with locking latch |
| Housing type | Sleeve housing |
| Application | Standard |
| Type | M1 |
| No. of cable outlets | 1 |
| Type | Tall design |
| Protective cover | no |
| Shielded | no |
| Cable outlet | straight |
| Pg screw connection | none |
| Dimensional drawing |
|
| Width | 30.4 mm |
| Height | 72 mm |
| Length | 50 mm |
| Flammability rating according to UL 94 | V0 (Housing) |
| Housing material | PA |
| Mechanical data | |
| Locking type | Pin |
| Assembly note | The housing can accommodate all Phoenix Contact modules with a single module width. Exception: Push-in TWIN modules with Order Numbers 1423962 and 1423961 may not be used due to the lack of rotation protection. |
| The sleeve base housing must be supplemented with the EVO screw connection. The EVO screw connection is available in 2 sizes. It enables the creation of a straight or lateral cable outlet. The EVO screw connection is mounted by hand or with the aid of a pipe wrench, for example. | |
| The housing can accommodate all Phoenix Contact modules with single module width. Exception: Push-in TWIN modules with Item No.. 1423962 and 1423961 may not be used due to the lack of rotation protection. |
| Ambient conditions | |
| Degree of protection | IP66 |
| Enclosure rating (NEMA) | 12 |
| Impact strength | IK06 |
| Ambient temperature (operation) | -40 °C ... 125 °C |
