SACC-DSI-M12FSL-4FE-M16XL-L180X - Device connector rear mounting

1239091

Device connector rear mounting, Power, 5-position, Socket, straight, M12, L-coding, Wave soldering, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb < 0.1 %)

Tuotetiedot

Notes on operation	The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Notes on operation	FE not connected to metal parts that can be touched, no protective function
Order information:	Lock nut is included in the scope of delivery

Mounting type	Rear mounting (M16 x 1.5, with flat nut)

Product type	Circular connectors (device side)
Sensor type	Power
Number of positions	5
Shielded	no
Coding	L
Thread type	M12
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Material Housing	GD-Zn
Material Housing surface	Ni
Material Insulating body	PA
Material Contact	CuZn
Material Contact surface	Au
Material Seal	FKM
Flammability rating according to UL 94	V0

Rated voltage in acc. with IEC 61076-2-101	630 V
Rated surge voltage	1.5 kV
Nominal voltage U_N	63 V DC
Nominal current I_N	16 A

Conductor connection
Connection method	Wave soldering
Contact connection type	Socket

Mechanical data
Insertion/withdrawal cycles	> 100

Connection 1
Head design	Socket
Head cable outlet	straight
Head thread type	M12
Coding	L

Signal type/category	Power

Ambient conditions
Degree of protection	IP65 (When plugged in)
	IP67 (When plugged in)
	IP65/IP67
Ambient temperature (operation) (male connector/female connector)	-25 °C ... 85 °C (Plug / socket)
	-40 °C ... 85 °C (without mechanical actuation)
UL Type Rating	Type 4 (indoor use only)

Standard designation	M12 circular connector
Standards/specifications	according to IEC 61076-2-111

Kaupalliset tiedot

Tuotenumero	1239091
Pakkausyksikkö	20 Kappaletta
Vähimmäistilausmäärä	20 Kappaletta
Tuoteavain	ABQEHN
Tuotekoodi	ABQEHN
GTIN	4063151432607
Paino kappaletta kohti (sis. pakkauksen)	18,135 g
Paino kappaletta kohti (ilman pakkausta)	17,142 g
Tullitariffinumero	85366990
Alkuperämaa	DE

Luokitukset

Hyväksynnät

Approval Specification Data
	Nimellisjännite U_N	Nimellisvirta I_N	Poikkipinta AWG	Poikkipinta mm²
keine
	63 V	16 A

Environmental product compliance

Yhteensopivat tuotteet

Lisätarvikkeet

Edut

Easy PCB assembly: one-piece connectors for wave soldering

For compact devices: transmit high power in a confined space

Easy-to-install, optimized XL housing contour with wrench size 19

Mechanical tightening limitation for long-term-stable gasket

ECLASS-13.0	27440110
ECLASS-15.0	27440110

EU RoHS
Täyttää RoHS-direktiivin vaatimukset	Kyllä (Ei poikkeussäännöksiä)
China RoHS
Environment friendly use period (EFUP)	EFUP-E Ei raja-arvot ylittäviä vaarallisia aineita
EU REACH SVHC
Huomautus REACH-kandidaattiaineesta (CAS-nro)	Aineen pitoisuus ei ole yli 0,1 %.

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

SACC-DSI-M12FSL-4FE-M16XL-L180X - Device connector rear mounting

1239091

Tuotetiedot

ECLASS

ETIM

cULus Recognized

Yhteensopivat tuotteet

Edut

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

SACC-DSI-M12FSL-4FE-M16XL-L180X - Device connector rear mounting 1239091

Tuotetiedot

ECLASS

ETIM

Yhteensopivat tuotteet

PROT M12 MS PWR - Screw plug 1092802

PROT-M12 MS-M PPI - Screw plug 1320658

Edut

SACC-DSI-M12FSL-4FE-M16XL-L180X - Device connector rear mounting

1239091