CK6,0-ED-6,00F AG
-
Crimp contact
1556218
Crimp contact, series: HC-M-...-25, Socket, turned, contact diameter: 6 mm, connection cross section: 6 mm2 ... 6 mm2, AWG 10...10 , contact material: Cu alloy
Tuotetiedot
| General | HC-M-...-25 contact carrier, HC-DCC4-I-CT-HW-F |
| Assembly note | The quality of a crimp connection is determined by DIN EN 60352-2. |
| Assembly note | The contacts are qualified for crimping dies in accordance with DIN 46235. Klauke, for example, offers an appropriate tool: Crimping dies from the D22 series are required for the EKM6022 battery-powered hydraulic crimping pliers. Due to the narrow crimping width of 5 mm, it is very important to make two compressions next to one another. For the EK12042 model, crimping dies from the HD13 series are required. Due to a wider crimping process, only one compression is required. |
| Product type | Crimp contact |
| Series | HC-M-...-25 |
| Type | Individual female contact |
| Contact material type | turned |
| Connection technology | |
| Contact connection type | Socket |
| Connection method | Crimp connection |
| Conductor connection | |
| Stripping length | 15.5 mm |
| Connection cross section | 6 mm² ... 6 mm² |
| Connection cross section AWG | 10 ... 10 |
| Material Contact | Cu alloy (lead-free) |
| Material Contact surface | Ag |
| Dimensional drawing |
|
| Length [l] | 31.5 mm |
| Diameter (Contact diameter) | 6 mm |
| Mechanical data | |
| Insertion/withdrawal cycles | ≥ 500 |
| Ambient conditions | |
| Ambient temperature (operation) | -40 °C ... 125 °C |