HC-DD72-I-CT-F-144 - Contact insert

1584101

Contact insert, number of positions: 72+PE, size: B16, Socket, Crimp connection, 250 V, 10 A, 0.14 mm² ... 2.5 mm², application: Signal

Tuotetiedot

General	For HEAVYCON ADVANCE and HEAVYCON housing of type B16, crimp contacts: CK 1,6-ED... (not included in scope of supply)
General	Connectors may be operated only when there is no load/voltage.
General	It is imperative that guide pins (HC-CST) and sockets (HC-CBU) are used to prevent tip collision due to misalignment.

Assembly note	To ensure correct use, installation in housing with IP54 protection or better is required

Product type	Contact insert with a fixed no. of positions
Series	HC-DD
Application	Signal
Type	B16
	B32
Number of positions	72
Connection profile	72+PE
Contact numbering	73 - 144
Contact material type	turned
	rolled
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Dimensional drawing
Width	34 mm
Height	34.5 mm
Length	84 mm
Drill hole distance, horizontal	77.5 mm
Drill hole distance, vertical	27 mm
Mechanical characteristics
Minimum housing height	72 mm
Contact diameter	1.6 mm

Connection technology
Connection technology	Crimp connection
Connection in acc. with standard	IEC / EN
Conductor connection
Conductor cross section	0.14 mm² ... 2.5 mm²
Connection cross section AWG	26 ... 14
Tightening torque	0.8 Nm ... 1.2 Nm (PE connection)
	0.5 Nm ... 0.8 Nm (Mounting screws for mounting in the HEAVYCON housing)
Stripping length of the individual wire	8 mm (0.14 mm² ... 1.5 mm²)
	6 mm (2.5 mm²)

Rated voltage (III/3)	250 V
Rated surge voltage	4 kV
Rated current	10 A
SCCR	5 kA (UL 2237)

Mechanical data
Insertion/withdrawal cycles	≥ 500

Flammability rating according to UL 94	V0
Contact material	Copper alloy
Contact surface material	Ag (alternatively Au)
Contact carrier material	PC
Standards/regulations	PC

Ambient conditions
Ambient temperature (operation)	-40 °C ... 125 °C (including heating up of contacts)

Constructional and testing regulations	DIN VDE 0627/86
	DIN VDE 0110/02.79
	DIN VDE 0110-1/04.97
	IEC 60664-1, DIN IEC 60512
	IEC 60352
Tests	DIN VDE 0627/86
	DIN VDE 0110/02.79
	DIN VDE 0110-1/04.97
	IEC 60664-1, DIN IEC 60512
	IEC 60352
Testing
Standards/regulations	PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)

Kaupalliset tiedot

Tuotenumero	1584101
Pakkausyksikkö	1 Kappaletta
Vähimmäistilausmäärä	1 Kappaletta
Tuoteavain	AF7ABF
Tuotekoodi	AF7ABF
Luettelosivu	Sivu 539 (C-2-2019)
GTIN	4046356133418
Paino kappaletta kohti (sis. pakkauksen)	60,2 g
Paino kappaletta kohti (ilman pakkausta)	60,2 g
Tullitariffinumero	85366990
Alkuperämaa	CN

Luokitukset

Hyväksynnät

Approval Specification Data
	Nimellisjännite U_N	Nimellisvirta I_N	Poikkipinta AWG	Poikkipinta mm²
	250 V	7 A	26 - 14

Approval Specification Data
	Nimellisjännite U_N	Nimellisvirta I_N	Poikkipinta AWG	Poikkipinta mm²
	250 V	7 A	- 14

Approval Specification Data
	Nimellisjännite U_N	Nimellisvirta I_N	Poikkipinta AWG	Poikkipinta mm²
	250 V	10 A	- 14

Approval Specification Data
	Nimellisjännite U_N	Nimellisvirta I_N	Poikkipinta AWG	Poikkipinta mm²
	250 V	7 A	- 14

Environmental product compliance

Yhteensopivat tuotteet

Lisätarvikkeet

Edut

Can be used in rail vehicles, satisfy DIN EN 45545-2 with requirement sets R22, R23, and R24 in hazard levels HL1, HL2, and HL3.

Shock and vibration-resistant in accordance with DIN EN 61373

EU RoHS
Täyttää RoHS-direktiivin vaatimukset	Kyllä (Ei poikkeussäännöksiä)
China RoHS
Environment friendly use period (EFUP)	EFUP-E Ei raja-arvot ylittäviä vaarallisia aineita
EU REACH SVHC
Huomautus REACH-kandidaattiaineesta (CAS-nro)	Aineen pitoisuus ei ole yli 0,1 %.

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

HC-DD72-I-CT-F-144 - Contact insert

1584101

Tuotetiedot

ECLASS

ETIM

UNSPSC

DNV

CSA

cUL Recognized

UL Recognized

cULus Recognized

Yhteensopivat tuotteet

Edut

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

HC-DD72-I-CT-F-144 - Contact insert 1584101

Tuotetiedot

ECLASS

ETIM

UNSPSC

Yhteensopivat tuotteet

HC-CP-CK1.6-PL - Coding element 1095422

HC-CST - Coding element 1676857

HC-CBU - Coding element 1676860

HC-B-PE-PT - Adapter 1054672

HC-B-2PE-PT - PE multiplier 1054675

HC-B-3PE - PE multiplier 1644326

HC-B-PES - Screw 1604997

HC-DD72-FP-F - Front plate 1201498

HC-B-ZG - Strain relief clamp 1685327

HC-B-ZS - Strain relief clamp 1685330

HC-CIF-B16-HFWL-PL - DIN rail mounting frame 1424336

HC-B 16-ANDOCK - Docking frame 1586138

HC-CIF-B06-24-BFAFL-PL - DIN rail mounting frame 1424338

HC-B24/16-ADP-SS - Adapter plate 1034216

CK1,6-ED-0,37BU AG - Crimp contact 1663394

CK1,6-ED-0,50BU AG - Crimp contact 1663404

CK1,6-ED-0,75BU AG - Crimp contact 1663417

CK1,6-ED-1,00BU AG - Crimp contact 1663420

CK1,6-ED-1,50BU AG - Crimp contact 1663433

CK1,6-ED-2,50BU AG - Crimp contact 1663446

CK1,6-ED-BU-POF - Female contact 1885004

CK1,6-ED-0,37BU AU - Crimp contact 1674969

CK1,6-ED-0,50BU AU - Crimp contact 1674480

CK1,6-ED-0,75BU AU - Crimp contact 1672440

CK1,6-ED-1,00BU AU - Crimp contact 1674943

CK1,6-ED-1,50BU AU - Crimp contact 1674930

CK1,6-ED-2,50BU AU - Crimp contact 1674985

CK1,6-ER-1,00BU OIC AG - Crimp contact 1004362

CK1,6-ER-2,50BU OIC AG - Crimp contact 1004366

CK1,6-BR-1,00BU OIC AG - Crimp contact 1004381

CK1,6-BR-2,50BU OIC AG - Crimp contact 1004383

HC-DD72-I-CT-M-144 - Contact insert 1584088

UNIFOX MT-CK 1.6/2.5 - Assembly tool 1089092

UNIFOX RT-CK 1.6 - Contact removal tool 1072069

Edut

HC-DD72-I-CT-F-144 - Contact insert

1584101