Connector - SACC-M12MS-5PL M
1424649

Connector, Universal, 5-position, unshielded, Plug straight M12, A-coded, Push-lock spring connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4 mm ... 8 mm


Tuotetiedot




Assembly instruction: NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.

Assembly instructions The wires can be connected both with ferrules and without ferrules

Product type Circular connector (cable-side)
Number of positions 5
No. of cable outlets 1
Shielded no
Coding A - standard
Cable outlet straight
Insulation characteristics
Overvoltage category II
Degree of pollution 3

Mittapiirros
Length 60 mm
External dimensions
Outside diameter 4 mm ... 8 mm
Housing
Diameter housing 19 mm

Color Handle area black
Material PBT (Pressure nut, weight: 2.36 g)
PA 6 (Actuation lever)
Flammability rating according to UL 94 V0
Sealing material NBR
Material of grip body PA 6.6
Contact material CuSn
Contact surface material Ni/Au
Contact carrier material PA 6.6
Cable gland material Zinc die-cast, nickel-plated
Standards/regulations PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
PA 6: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
PBT: Fire protection in rail vehicles - requirement sets R22, R23, R24, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL2, R26: HL3)

Conductor connection
Connection method Push-lock spring connection
Connection cross section 0.14 mm² ... 0.75 mm² (without ferrule)
0.08 mm² ... 0.5 mm² (with ferrule)
0.14 mm² ... 0.75 mm² (solid)
Connection cross section AWG 26 ... 18 (without ferrule)
28 ... 20 (with ferrule)
Stripping length of the individual wire 7 mm
Tightening torque 0.4 Nm (M12 knurl)
0.4 Nm (Connector with coupling sleeve)
1.5 Nm (Pressure nut with coupling sleeve)
Pin assignment
Contact | Color (signal designation) | Contact (optional) 1 = BN
2 = WH
3 = BU
4 = BK
5 = GY

Rated surge voltage 1.5 kV
Contact resistance ≤ 5 mΩ
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 48 V AC
60 V DC
Nominal current IN 4 A (2 A when using 0.14 mm² conductors)

Mechanical data
Insertion/withdrawal cycles ≥ 100

Connection 1
Head design Plug
Head cable outlet straight
Head thread type M12
Coding A-coded

Signal type/category Universal
Stripping length of the individual wire 7 mm

Degree of protection IP65
IP67
Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket)

Testing
Standards/regulations PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
PA 6: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
PBT: Fire protection in rail vehicles - requirement sets R22, R23, R24, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL2, R26: HL3)
M12
Standards/specifications IEC 61076-2-101
Standards/specifications EN 50155:2001

Tuotenumero 1424649
Pakkausyksikkö 1 Kappaletta
Vähimmäistilausmäärä 1 Kappaletta
Tuoteavain BF2CEA
Tuotekoodi BF2CEA
Luettelosivu Sivu 19 (C-2-2019)
GTIN 4055626374970
Paino kappaletta kohti (sis. pakkauksen) 22,14 g
Paino kappaletta kohti (ilman pakkausta) 22,14 g
Tullitariffinumero 85366990
Alkuperämaa DE


ECLASS

ECLASS-9.0 27440102
ECLASS-10.0.1 27440102
ECLASS-11.0 27440102

ETIM

ETIM 8.0 EC002635

UNSPSC

UNSPSC 21.0 39121400

EAC

Hyväksyntätunnus: EAC-Zulassung

EAC

Hyväksyntätunnus: RU C-DE.BL08.B.00511

UL Listed

Hyväksyntätunnus: E221474
Approval Specification Data
Nimellisjännite UN Nimellisvirta IN Poikkipinta AWG Poikkipinta mm2
250 V 4 A 26 - 18

cUL Listed

Hyväksyntätunnus: E221474
Approval Specification Data
Nimellisjännite UN Nimellisvirta IN Poikkipinta AWG Poikkipinta mm2
250 V 4 A 26 - 18

cULus Listed


China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values

Edut

Time-saving Push-Lock connection: Tool-free connection and disconnection of conductors by opening the contact levers
Intuitive connection: Easy assignment of individual litz wires with color-coded and numerical identification of the contact levers
Integrated Push-in Technology: Wire rigid and pretreated conductors easily by means of simple, direct insertion
Shock- and vibration-resistant connection: Proven spring-cage technology guarantees secure and reliable contacting