SACC-M12FS-5CON-PG7-M SKIN
-
Connector
1559000
Sensor/actuator socket, straight, 5-pos., M12, A-coded, screw connection, metal knurl, cable gland Pg7 SKINTOP®
Tuotetiedot
Assembly note | NOTE: Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
Product type | Circular connector (cable-side) |
Sensor type | Universal |
Number of positions | 5 |
No. of cable outlets | 1 |
Shielded | no |
Coding | A |
Cable outlet | straight |
Pg screw connection | Pg7 |
Insulation characteristics | |
Overvoltage category | II |
Degree of pollution | 3 |
Dimensional drawing |
|
Width | 20.2 mm |
Height | 20.2 mm |
Length | 70 mm |
External dimensions | |
Outside diameter | 4 mm ... 6 mm |
Housing | |
Diameter housing | 20.2 mm |
Flammability rating according to UL 94 | HB |
Seal material | NBR |
Material of grip body | PBT |
Contact material | CuZn |
Contact surface material | CuSnZn |
Contact carrier material | PA |
Material for screw connection | Zinc die-cast, nickel-plated |
Conductor connection | |
Connection method | Screw connection |
Connection cross section | 0.25 mm² ... 0.75 mm² (without ferrule) |
0.14 mm² ... 0.75 mm² (with ferrule) | |
0.25 mm² ... 0.75 mm² (solid) | |
Connection cross section AWG | 24 ... 18 (without ferrule) |
26 ... 20 (with ferrule) | |
Stripping length of the individual wire | 5 mm |
Tightening torque | 0.4 Nm (M12 knurl) |
0.2 Nm (Screw terminal blocks) | |
0.8 Nm ... 1 Nm (Pressure screw) |
Rated surge voltage | 1.5 kV |
Contact resistance | ≤ 8 mΩ |
Insulation resistance | ≥ 100 MΩ |
Nominal voltage UN | 48 V AC |
60 V DC | |
Nominal current IN | 4 A |
Mechanical data | |
Insertion/withdrawal cycles | ≥ 100 |
Connection 1 | |
Head design | Socket |
Head cable outlet | straight |
Head thread type | M12 |
Coding | A |
Signal type/category | Universal |
Stripping length of the individual wire | 5 mm |
Ambient conditions | |
Degree of protection | IP67 |
Ambient temperature (operation) (male connector/female connector) | -20 °C ... 80 °C (Plug / socket) |
M12 | |
Standard designation | M12 connector |
Standards/specifications | IEC 61076-2-101 |
Tuotenumero | 1559000 |
Pakkausyksikkö | 1 Kappaletta |
Vähimmäistilausmäärä | 1 Kappaletta |
Tuoteavain | AF2CAA |
Tuotekoodi | AF2CAA |
GTIN | 4046356299893 |
Paino kappaletta kohti (sis. pakkauksen) | 27,8 g |
Paino kappaletta kohti (ilman pakkausta) | 27,34 g |
Tullitariffinumero | 85366990 |
Alkuperämaa | DE |
ECLASS
ECLASS-13.0 | 27440116 |
ECLASS-15.0 | 27440116 |
ETIM
ETIM 9.0 | EC002635 |
UNSPSC
UNSPSC 21.0 | 39121400 |
EU RoHS | |
Täyttää RoHS-direktiivin vaatimukset | Kyllä |
poikkeussäännökset siltä osin kuin ne ovat tiedossa | 6(c) |
China RoHS | |
Environment friendly use period (EFUP) |
EFUP-50
Löydät tuotekohtaisen Kiinan RoHS-ilmoitusluettelon kunkin tuotteen latausalueelta Valmistajan ilmoitus -kohdasta. EFUP-E-merkinnän sisältäville tuotteille ei tarvita Kiinan RoHS-ilmoitusluetteloa, eikä sitä tarvitse siksi laatia.
|
EU REACH SVHC | |
Huomautus REACH-kandidaattiaineesta (CAS-nro) | Lead (CAS-nro: 7439-92-1) |
SCIP | d19577f4-fb78-45c2-b47d-ba620624a6fa |
Yhteensopivat tuotteet
-
-
SAC-5P-100,0-PUR/0,34 - Cable reel 1501676
-
A 0,25- 5 - Ferrule 3202465
-
TSD 04 SAC - Torque screwdriver 1208429
-
TSD-M 1,2NM - Torque screwdriver 1212224
-
TSD-M SAC-BIT ADAPTER - Adapter insert 1212600
-
SACC BIT M12-D20 - Tool 1208445
-
CRIMPFOX 6H - Crimping pliers 1212046
-
WIREFOX SAC - Stripping tool 1212623
-
SZF 1-0,6X3,5 - Screwdriver 1204517
Edut
Safe use in the field, thanks to a high degree of protection
Screw connection: proven connection technology for a large selection of different conductors
PHOENIX CONTACT OY
Niittytie 11, 01300 Vantaa