EV-T1G3C-1AC30A-5,5M6,0JSBK11U - AC charging cable

1467288

CHARX connect comfort, Type 1, AC charging cable, 30 A permanent, 250 V AC, with vehicle charging connector and open cable end, cable: 5.5 m, black, straight, without protective cap, with locking option for padlock, PHOENIX CONTACT logo, IEC 62196-2, SAE J1772, PSE, for charging electric vehicles (EV) with alternating current (AC) via type 1 vehicle charging inlets

Tuotetiedot

Tuotekuvaus

Tekniset tiedot

Product properties

Product family	CHARX connect comfort
Application	for charging electric vehicles (EV) with alternating current (AC) via type 1 vehicle charging inlets
	for installation at charging stations for electromobility (EVSE)
Design	without protective cap
	with locking option for padlock
Charging standard	Type 1
Charging mode	Mode 3, Case C
Affixed logo	PHOENIX CONTACT logo
Customer variations	On request

Electrical properties

Charging power and current (AC charging (1-phase))
Type of charging current	AC single-phase
Charging current	30 A AC (1-phase)
Charging power	7.5 kW (1-phase)
Rated voltage	250 V
Pin assignment (Power contacts)
Note on the connection method	Crimp connection, cannot be disconnected
Number	3 (L1, N, PE)
Rated voltage	250 V AC
Rated current	30 A
Pin assignment (Signal contacts)
Note on the connection method	Crimp connection, cannot be disconnected
Type of signal transmission	Pulse width modulation
Number	2 (CP, CS)
Rated voltage	30 V AC
Rated current	2 A
Coding	480 Ω (Lever actuated)
Coding		150 Ω (Lever not actuated)

Dimensions

Vehicle charging connector
Width	58 mm
Height	151.1 mm
Depth	236.1 mm

Material specifications

Color (Housing)	black (9005)
Color (Handle area)	black (9005)
Color (Actuating element)	silver gray (7001)
Color (Mating face)	black (9005)
Color (Protective cap)	black (9005)
Color (Cable)	black (9005)
Material (Vehicle charging connector)	Plastic
Material (Cable outer sheath)	TPE-U
Material (Contact surface)	Silver
Note	The color appearance and gloss level of the charging cable may vary.

Cable/line

Cable length	5.5 m
Wiring certifications	PSE
Cable weight	max. 420.00 kg/km
Cable type	straight
Cable structure	3 x 6 mm² + 1 x 0.75 mm²
External cable diameter	16.30 mm
Stripping length of the sheath	60 mm ±15 mm
Stripping length	60 mm ±15 mm
Cable resistance	≤ 0.00317 Ω/m (based on a power core, at an ambient temperature of 20°C)

Mechanical properties

Mechanical data
Insertion/withdrawal cycles	> 10000
Insertion force	< 75 N
Withdrawal force	< 75 N

Environmental and real-life conditions

Ambient conditions
Degree of protection (Vehicle charging inlet)	IP44 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
Degree of protection (Protective cap)	IP54
Ambient temperature (operation)	-30 °C ... 50 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	5000 m (above sea level)

Standards and regulations

Standards
Standards/regulations	IEC 62196-2
	SAE J1772
	PSE

Kaupalliset tiedot

Tuotenumero	1467288
Pakkausyksikkö	1 Kappaletta
Vähimmäistilausmäärä	25 Kappaletta
Tuoteavain	XWBDAB
Tuotekoodi	XWBDAB
GTIN	4063151863661
Paino kappaletta kohti (sis. pakkauksen)	2,416 g
Paino kappaletta kohti (ilman pakkausta)	2 416 g
Tullitariffinumero	85444290
Alkuperämaa	Tieto alkuperämaasta toimitetaan toimituksen mukana.

Luokitukset

Hyväksynnät

Approval Specification Data
	Nimellisjännite U_N	Nimellisvirta I_N	Poikkipinta AWG	Poikkipinta mm²
keine
	250 V	30 A

Environmental product compliance

Yhteensopivat tuotteet

Lisätarvikkeet

Edut

Complete product range

Convenient handling due to the ergonomic, triple award-winning design

Available with your logo on request - for consistent branding of your charging station

Longitudinal water tightness reliably prevents water ingress

Developed and produced in accordance with the IATF 16949 automotive standard and ISO 9001

Tested in accordance with automotive standards LV124, LV214, and LV215-2

Tested in accordance with EV Ready 37 requirements

Laser-marked mating face in accordance with DIN EN 17186

ECLASS-13.0	27144705
ECLASS-15.0	27144705

EU RoHS
Täyttää RoHS-direktiivin vaatimukset	Kyllä
poikkeussäännökset siltä osin kuin ne ovat tiedossa	6(c)
China RoHS
Environment friendly use period (EFUP)	EFUP-50 Löydät tuotekohtaisen Kiinan RoHS-ilmoitusluettelon kunkin tuotteen latausalueelta Valmistajan ilmoitus -kohdasta. EFUP-E-merkinnän sisältäville tuotteille ei tarvita Kiinan RoHS-ilmoitusluetteloa, eikä sitä tarvitse siksi laatia.
EU REACH SVHC
Huomautus REACH-kandidaattiaineesta (CAS-nro)	Lead (CAS-nro: 7439-92-1)
SCIP	3cdd253f-447b-47cc-b49e-5ca2fb1f1cc1

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

EV-T1G3C-1AC30A-5,5M6,0JSBK11U - AC charging cable

1467288

Tuotetiedot

ECLASS

ETIM

PSE

Yhteensopivat tuotteet

Edut

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

EV-T1G3C-1AC30A-5,5M6,0JSBK11U - AC charging cable 1467288

Tuotetiedot

ECLASS

ETIM

Yhteensopivat tuotteet

EV-T1AC-PARK - Charging connector holder 1624139

G-INS-M32-M68N-PNES-BK - Cable gland 1411136

LPT 6/ 3-7,5-ZB - PCB terminal block 1098168

XPC 1,5/ 2-ST-3,5 BK - PCB connector 1464104

PTSPL-6/1-2X2 2,9 VPE500 - PCB terminal block 1704834

SPT 2,5/ 1-V-5,0 - PCB terminal block 1731468

Edut

EV-T1G3C-1AC30A-5,5M6,0JSBK11U - AC charging cable

1467288