Sisällöt, joita tarkastelet, on räätälöity kohteelle Suomi. Tarkastele sisältöjä kohteesta Yhdysvallat | Valitse toinen maa
CHARX connect eco, Type 2, AC charging cable, 20 A permanent, 480 V AC, with vehicle charging connector and open cable end, cable: 6 m, black, straight, with protective cap, Free area for logo label, IEC 62196-2, for charging electric vehicles (EV) with alternating current (AC)
AC charging cable with vehicle charging connector and free cable end for charging electric vehicles (EV) with alternating current (AC) via type 2 vehicle charging inlets, for installation at charging stations for e-mobility (EVSE)
| Product type | AC charging cable |
| Product family | CHARX connect eco |
| Application | for charging electric vehicles (EV) with alternating current (AC) |
| compatible with type 2 infrastructure charging sockets at charging stations for electromobility (EVSE) | |
| Type | AC charging cable |
| with vehicle charging connector and open cable end | |
| Design | with protective cap |
| Affixed logo | Free area for logo label |
| Charging mode | Mode 3, Case C |
| Charging standard | Type 2 |
| Customer variations | On request |
| Type of signal transmission | Pulse width modulation |
| Note on the connection method | Crimp connection, cannot be disconnected |
| Coding | 680 Ω (between PE and PP) |
| Type of charging current | AC 3-phase |
| Charging power | 16.63 kW (3-phase) |
| Charging current | 20 A AC (3-phase) |
| Power contact | |
| Number | 5 (L1, L2, L3, N, PE) |
| Rated voltage | 480 V |
| Rated current | 20 A |
| Signal contact | |
| Number | 2 (CP, PP) |
| Rated voltage | 30 V AC |
| Rated current | 2 A |
| Vehicle charging connector | |
| Dimensional drawing |
|
| Width | 70.4 mm |
| Height | 82.3 mm |
| Depth | 201.8 mm |
| Color (Housing) | black (9005) |
| Color (Handle area) | black (9005) |
| Color (Mating face) | black (9005) |
| Color (Protective cap) | black (9005) |
| Color (Cable) | black (9005) |
| Material (Vehicle charging connector) | Plastic |
| Material (Cable outer sheath) | TPE-U |
| Material (Contact surface) | Silver |
| Note | The color appearance and gloss level of the charging cable may vary. |
| Cable length | 6 m |
| Wiring standards/regulations | prEN 50620/DIN EN 50620 |
| Wiring certifications | VDE |
| Cable weight | max. 193.00 kg/km |
| Cable type | Class 5 |
| Cable type | straight |
| Cable structure | 5 x 1.5 mm² + 1 x 0.5 mm² |
| External cable diameter | 11.55 mm ±0.35 mm |
| Outer sheath, material | TPE-U |
| Cable resistance | ≤ 0.011324 Ω/m (based on a power core, at an ambient temperature of 20°C) |
| Bending radius | min. 86.625 mm (7.5x diameter) |
| Mechanical data | |
| Insertion/withdrawal cycles | > 10000 |
| Insertion force | < 100 N |
| Withdrawal force | < 100 N |
| Ambient conditions | |
| Degree of protection (Vehicle charging connector) | IP44 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products) |
| Degree of protection (Protective cap) | IP54 |
| Ambient temperature (operation) | -40 °C ... 50 °C |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Altitude | max. 5000 m (above sea level) |
| Standards | |
| Standards/regulations | IEC 62196-2 |
| Nimellisjännite UN | Nimellisvirta IN | Poikkipinta AWG | Poikkipinta mm2 | |
|---|---|---|---|---|
| 480 V | 20 A |