Differential current monitoring - EV-RCM-6DC-WAT

The residual current monitoring module is used for AC and DC residual current detection in AC charging points. The higher-level safety equipment (e.g., residual current device) is protected against potential DC residual currents.

Detalii despre produs

Product type Residual current monitoring module
Application Residual current monitoring module for detecting AC and DC residual voltages in 50/60 Hz AC installations
Type 1-channel
Manufacturer Western Automation
Manufacturer Designation RCM14-03
Charging standard Type 2
Charging mode Mode 3

Type of charging current AC
Power consumption min. 60 mW
Measuring current transducer
Diameter of measuring coil 14 mm
Measuring range: Residual current
Residual current IΔn 30 mA (AC)
6 mA (DC)
Rated current In 100 A (1-phase)
40 A (3-phase)
Supply voltage range 10.8 V DC ... 13.2 V DC (nominal voltage range)
Nominal power consumption 60 mW
Frequency range 50 Hz ... 60 Hz

Conductor connection
Connection method Pin strip 4-pos.
Conductor cross section AWG 26

Number of interfaces 2 (Error/Test)

Charging controllers
Number of charging points 1

Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -40 °C ... 85 °C

Conformance CE-compliant

Standards/regulations IEC 62955

Mounting position any

Număr articol 1309697
Unitate de ambalare 1 Bucată
Cantitate minimă pentru comandă 1 Bucată
Cod produs XWBBFK
GTIN 4063151560669
Greutate pe bucată (inclusiv ambalajul) 69,3 g
Greutate pe bucată (fără ambalaj) 69,3 g
Cod tarifar vamal 85437090
Țara de origine CN


ECLASS-11.0 27144703


ETIM 8.0 EC002889


UNSPSC 21.0 39121800

Produse compatibile