PLC-RSP- 24DC/ 1IC/ACT - Relay module - 2912413

Product family	PLC-INTERFACE
Application	high inrush currents
Operating mode	100% operating factor
Mechanical service life	3x 10⁷ cycles
Insulation characteristics: Standards/regulations
Insulation	Safe isolation, reinforced insulation
Overvoltage category	III
Pollution degree	2
Data management status
Date of last data management	12.09.2025

Maximum power dissipation for nominal condition	0.43 W
Test voltage (Winding/contact)	4 kV AC (50 Hz, 1 min., winding/contact)
Standards/regulations
Rated surge voltage	6 kV

Coil side
Nominal input voltage U_N	24 V DC
Input voltage range	20.2 V DC ... 33.6 V DC
Drive and function	monostable
Typical input current at U_N	18 mA
Typical response time	8 ms
Typical release time	10 ms
Protective circuit	Reverse polarity protection; Polarity protection diode
	Freewheeling diode; Freewheeling diode
Operating voltage display	Yellow LED

Switching
Contact switching type	1 N/O contact
Type of switch contact	Single contact
Contact material	AgSnO
Maximum switching voltage	250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Minimum switching voltage	12 V AC/DC (at 100 mA)
Limiting continuous current	6 A
Limiting continuous current		10 A (the value is permissible if both connections 13, both connections 14 and both connections BB are bridged)
Maximum inrush current	80 A (for 20 ms)
Maximum inrush current		130 A (peak, at capacitive load, 230 V AC, 24 μF)
Min. switching current	100 mA (at 12 V DC)
Interrupting rating (ohmic load) max.	144 W (at 24 V DC)
		58 W (at 48 V DC)
		48 W (at 60 V DC)
		50 W (at 110 V DC)
		80 W
		85 W (for 250 V DC)
		1500 VA (for 250 V AC)
Interrupting rating (ohmic load) max. bridged	240 W (for 24 V DC. The value is permissible if both connections 13, both connections 14 and both connections BB are bridged.)
Interrupting rating (ohmic load) max. bridged		2500 VA (for 250 V AC. The value is permissible if both connections 13, both connections 14 and both connections BB are bridged.)
Switching capacity	2 A (at 24 V, DC13)
		0.2 A (at 110 V, DC13)
		0.2 A (at 250 V, DC13)
		6 A (at 24 V, AC15)
		6 A (at 120 V, AC15)
		6 A (at 250 V, AC15)

Coil side
Connection method	Spring-cage connection
Stripping length	8 mm
Conductor cross-section rigid	0.14 mm² ... 2.5 mm²
Conductor cross-section flexible	0.14 mm² ... 2.5 mm²
Conductor cross-section AWG	26 ... 14
Contact side
Connection method	Spring-cage connection
Stripping length	8 mm
Conductor cross-section rigid	0.14 mm² ... 2.5 mm²
Conductor cross-section flexible	0.14 mm² ... 2.5 mm²
Conductor cross-section AWG	26 ... 14

Width	14 mm
Height	80 mm
Depth	94 mm

Color	green (RAL 6021)
Flammability rating according to UL 94 (Housing)	V0 (Housing)

Ambient conditions
Degree of protection (Relay)	RT II (Relay)
Degree of protection (Relay base)	IP20 (Relay base)
Ambient temperature (operation)	-40 °C ... 60 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C

Mounting type	DIN rail mounting
Assembly note	in rows with zero spacing
Mounting position	any

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PLC-RSP- 24DC/ 1IC/ACT - Relay module

2912413

Detalii despre produs

Produse compatibile

Avantajele dumneavoastră

Număr articol	2912413
Unitate de ambalare	10 Bucată
Cantitate minimă pentru comandă	1 Bucată
Cod produs	DK622A
GTIN	4046356050821
Greutate pe bucată (inclusiv ambalajul)	62,94 g
Greutate pe bucată (fără ambalaj)	61,16 g
Cod tarifar vamal	85364190
Țara de origine	DE

China RoHS
Environment friendly use period (EFUP)	EFUP-50 Un tabel de declarații China RoHS legat de articol poate fi găsit în zona de descărcare a articolului respectiv la „Declarația producătorului”. Nu se emite și nu este necesar niciun tabel de declarații China RoHS pentru toate articolele EFUP-E.
EU REACH SVHC
Trimitere la substanţa candidată REACH (nr. CAS)	Nicio substanţă cu un procentaj masic mai mare de 0,1 %

Standards/regulations
Standards/regulations	IEC 60664
		EN 50178

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PLC-RSP- 24DC/ 1IC/ACT - Relay module 2912413

Detalii despre produs

PLC-BSP- 24DC/ 1IC/ACT - Relay base 2912400

REL-MR- 24DC/1IC - Single relay 2961341

Produse compatibile

FBST 500-PLC RD - Continuous plug-in bridge 2966786

FBST 500-PLC BU - Continuous plug-in bridge 2966692

FBST 500-PLC GY - Continuous plug-in bridge 2966838

FBST 6-PLC RD - Single plug-in bridge 2966236

FBST 6-PLC BU - Single plug-in bridge 2966812

FBST 6-PLC GY - Single plug-in bridge 2966825

FBST 8-PLC GY - Single plug-in bridge 2967688

FBST 14-PLC BK - Single plug-in bridge 2967691

NS 35/ 7,5 V2A UNPERF 2000MM - DIN rail, unperforated 0801377

NS 35/ 7,5 PERF 2000MM - DIN rail perforated 0801733

NS 35/ 7,5 CU UNPERF 2000MM-VPE 10 - DIN rail, unperforated 0801762

NS 35/15 UNPERF 2000MM - DIN rail, unperforated 1201714

NS 35/15 CU UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1201895

NS 35/15-2,3 UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1201798

NS 35/15 AL UNPERF 2000MM - DIN rail, unperforated 1201756

NS 35/15 PERF 2000MM - DIN rail perforated 1201730

NS 35/ 7,5 UNPERF 2000MM - DIN rail, unperforated 0801681

ZB10/WH-100:UNBEDRUCKT - Zack marker strip 5060883

ZB10,LGS:FORTL.ZAHLEN - Zack marker strip 1053014

ZB 10:UNBEDRUCKT - Zack marker strip 1053001

PLC-ATP BK - Separating plate 2966841

PLC-ESK GY - Power terminal block 2966508

SZF 1-0,6X3,5 - Screwdriver 1204517

PLC-V8L/FLK14/OUT - System connection 2299660

PLC-V8L/FLK14/OUT/M - System connection 2304306

UC-TM 12 - Marker for terminal blocks 0819194

UCT-TM 12 - Marker for terminal blocks 0829144

REL-MR- 24DC/1IC - Single relay 2961341

Avantajele dumneavoastră

PLC-RSP- 24DC/ 1IC/ACT - Relay module

2912413