Relay module for digital output signals for switching loads with max. 3 A nominal current and a maximum voltage of 120 V AC. The switch contact is protected by an integrated replaceable 3 A fuse. If the fuse fails, this is indicated by an LED. A plug-in bridge determines whether an N/O contact or an N/C contact is used. The module is installed on a corresponding VIP I/O-Marshalling base element by means of plug-in contact. Installation in zone 2, “ec” type of protection is permitted.
IOA REL 120V DO/BFI/3.0A/EX
-
Relay module
2910154
Relay module for VIP I/O-Marshalling base elements. For switching 120 V AC loads up to max. 3 A. Integrated fuse and fuse failure indication. N/O contact or N/C contact can be used.
Pentru operarea acestui produs, sunt necesare și alte produse.
Accesorii necesare
Detalii despre produs
| Product family | VIP I/O-Marshalling |
| Application | Output function |
| Operating mode | 100% operating factor |
| Mechanical service life | 2x 107 cycles |
| Insulation characteristics | |
| Overvoltage category | II |
| Pollution degree | 2 |
| Data management status | |
| Date of last data management | 12.11.2025 |
| Coil side | |
| Nominal input voltage UN | 24 V DC |
| Input voltage range in reference to UN | 0.9 ... 1.1 |
| Typical input current at UN | 13.5 mA |
| Typical response time | 5 ms |
| Typical release time | 8 ms |
| Protective circuit | Reverse polarity protection; Polarity protection diode |
| Freewheeling diode; Freewheeling diode | |
| Operating voltage display | Yellow LED |
| Switching | |
| Contact switching type | 1 changeover contact |
| Type of switch contact | Single contact |
| Contact connection type | Power contact |
| Contact material | AgSnO |
| Maximum switching voltage | 120 V AC |
| Limiting continuous current | 3 A (fuse limited) |
| Maximum inrush current | on request |
| Min. switching current | 10 mA (at 12 V) |
| Interrupting rating (ohmic load) max. | 23 W (at 110 V DC) |
| 360 VA (at 120 V AC) | |
| Control circuits | |
| Connection method | Pin strip |
| Safety data | |
| Input voltage Ui | 24 V DC |
| Input current Ii | 13.5 mA |
| Dimensional drawing |
|
| Width | 10.3 mm |
| Height | 64.2 mm |
| Depth | 72.9 mm |
| Color | gray (RAL 7042) |
| Flammability rating according to UL 94 | V0 |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -40 °C ... 70 °C |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Altitude | ≤ 2000 m |
| Permissible humidity (operation) | 0 % ... 95 % (non-condensing) |
| ATEX | |
| Identification | II 3G Ex ec nC IIC T4 Gc |
| Certificate | Sira 17ATEX4293X |
| IECEx | |
| Identification | Ex ec nC IIC T4 Gc |
| Certificate | IECEx SIR 17.0078X |
| UKEX | |
| Identification | II 3G Ex ec nC IIC T4 Gc |
| Certificate | PxCIF23UKEX2910153X |
| UL, USA/Canada | |
| Identification | Class I, Div. 2, Groups A, B, C, D T4 |
| Class I, Zone 2, Group IIC T4 | |
| CSA, USA/Canada | |
| Identification | Class I, Div. 2, Groups A, B, C, D T4 |
| Class I, Zone 2, AEx ec nC IIC T4 Gc | |
| Ex ec nC IIC T4 Gc | |
| Standards/regulations | IEC 60664 |
| DIN EN 50178 |
| Mounting type | Plug-in mounting |
| Assembly note | Plugs into VIP/...BASE... |
| Mounting position | any |
IECEx
ID de înregistrare: IECEx SIR 17.0078XATEX
ID de înregistrare: SIRA 17ATEX4293XCSA
ID de înregistrare: 70134758CSAus
ID de înregistrare: 70134758cUL Listed
ID de înregistrare: FILE E 196811UL Listed
ID de înregistrare: FILE E 196811
Avantajele dumneavoastră
Output blown fuse indication
Active relay coil indication
Two-stage progressive release allowing for voltage checks with field-powered devices
Channel for marking accessories
Replaceable TE5-style fusing
120 V internal marshalling option for connected field device
Integrated keying reduces possible user error during replacement
1 PDT relay with user selectable NO or NC contact