SACC-DSI-M12FS-8CON-L180PSCUP
   - 
  Device connector rear mounting
    
      1436327
      
      
    
  
      Sensor/actuator flush-type connector, socket, 8-pos., M12, A-coded, rear/screw mounting with Pg9 thread, with solder cups, plastic version
Detalii despre produs
| Notes on operation | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. | 
| Mounting type | Rear mounting (Pg9, with locking nut) | 
| Tightening torque | 3 Nm ... 4 Nm (Installation-side) | 
| Product type | Circular connectors (device side) | 
| Number of positions | 8 | 
| Shielded | no | 
| Coding | A | 
| Thread type | M12 | 
| Insulation characteristics | |
| Overvoltage category | II | 
| Degree of pollution | 3 | 
| Material Housing | PA 6.6 | 
| Material Insulating body | PA 6.6 | 
| Material Contact | CuZn | 
| Material Contact surface | Au | 
| Material Seal | Viton | 
| Flammability rating according to UL 94 | HB | 
| Rated surge voltage | 0.8 kV | 
| Contact resistance | ≤ 3 mΩ | 
| Insulation resistance | ≥ 100 MΩ | 
| Nominal voltage UN | 30 V | 
| Nominal current IN | 2 A | 
| Max. conductor resistance | 57.6 mΩ/m | 
| Conductor connection | |
| Connection method | Solder cup | 
| Contact connection type | Socket | 
| Conductor cross-section | 0.25 mm² | 
| Conductor cross-section flexible | ... 0.25 mm² | 
| Tightening torque | 3 Nm ... 4 Nm (Installation-side) | 
| Mechanical data | |
| Insertion/withdrawal cycles | > 100 | 
| Connection 1 | |
| Head design | Socket | 
| Head cable outlet | straight | 
| Head thread type | M12 | 
| Coding | A | 
| Wire diameter incl. insulation | 1.15 mm ±0.07 mm | 
| Cable cross section | 0.25 mm² | 
| Conductor structure signal line | 14x 0.15 mm | 
| Thickness, insulation | 0.21 mm | 
| Nominal voltage, cable | 300 V | 
| Test voltage, cable | 2000 V AC | 
| Cable resistance | ≤ 57.6 mΩ/m | 
| Cable insulation resistance | ≥ 20 MΩ*km | 
| Ambient conditions | |
| Degree of protection | IP67 | 
| Ambient temperature (operation) (male connector/female connector) | -25 °C ... 85 °C (Plug / socket) | 
| -40 °C ... 85 °C (without mechanical actuation) | |
| UL Type Rating | Type 4 (indoor use only) | 
| Standard designation | M12 circular connector | 
| Standards/specifications | according to IEC 61076-2-101 | 
| Număr articol | 1436327 | 
| Unitate de ambalare | 20 Bucată | 
| Cantitate minimă pentru comandă | 20 Bucată | 
| Cod produs | ABQEHL | 
| GTIN | 4046356438292 | 
| Greutate pe bucată (inclusiv ambalajul) | 6,835 g | 
| Greutate pe bucată (fără ambalaj) | 6,5 g | 
| Cod tarifar vamal | 85366990 | 
| Țara de origine | DE | 
ECLASS
| ECLASS-13.0 | 27440109 | 
| ECLASS-15.0 | 27440109 | 
ETIM
| ETIM 9.0 | EC003569 | 
UNSPSC
| UNSPSC 21.0 | 39121400 | 
| EU RoHS | |
| Îndeplineşte cerinţele conform directivei RoHS | Da | 
| reglementări excepţionale, dacă sunt cunoscute | 6(c) | 
| China RoHS | |
| Environment friendly use period (EFUP) | 
              EFUP-50
               Un tabel de declarații China RoHS legat de articol poate fi găsit în zona de descărcare a articolului respectiv la „Declarația producătorului”. Nu se emite și nu este necesar niciun tabel de declarații China RoHS pentru toate articolele EFUP-E. 
             | 
          
| EU REACH SVHC | |
| Trimitere la substanţa candidată REACH (nr. CAS) | Lead (nr. CAS: 7439-92-1) | 
| SCIP | e924173d-415f-45a9-ab20-872ce2f29e83 |