C1 S6 A 260X260X210
-
Junction box
0899085
Junction box, With flange plate fixing, below, material: Stainless steel, 316L/1.4404, surface resistance: brushed, silver-colored, 260 mm x 260 mm x 210 mm, type of locking: Door with replaceable hinge, scope of supply - ATD: Door hinge with quarter turn locking, Mounting panel, Double-bit key, Fixing angle with mounting screws, M12 grounding bolts, affixed externally, Installation notes, Door hinge with quarter turn locking
Tuotetiedot
| Product type | Terminal box |
| Scope of supply | Door hinge with quarter turn locking |
| Mounting panel | |
| Double-bit key | |
| Fixing angle with mounting screws | |
| M12 grounding bolts, affixed externally | |
| Installation notes | |
| Flange plates | |
| Type | 30 |
| Insulation characteristics | |
| Protection class | I |
| Maximum power dissipation | 14 W (T6 up to 40 °C) |
| 8.75 W (T6 up to 55 °C) | |
| 5.2 W (T6 up to 65 °C) | |
| 19.3 W (T5 up to 40 °C) | |
| 14 W (T5 up to 55 °C) | |
| 10.5 W (T5 up to 65 °C) | |
| 22.8 W (T4 up to 40 °C) | |
| 10.9 W (T4 up to 55 °C) | |
| 14 W (T4 up to 65 °C) |
| Dimensional drawing |
|
| Width | 260 mm |
| Height | 260 mm |
| Depth | 210 mm |
| Clearance width, maximum DIN rail length | 204 mm |
| Max. material thickness | 1.5 mm |
| Color | silver-colored |
| Material | Stainless steel, 316L/1.4404 |
| Seal material | Silicon |
| Surface characteristics | brushed |
| Note | 240 grain |
| General | |
| Type of locking (GRP) | Door with replaceable hinge Quarter turn locking with two-way key bit |
| Degree of protection (IP code) | |
| Degree of protection | IP66 |
| Ambient conditions | |
| Ambient temperature (operation) | -55 °C ... 135 °C |
| Assembly note | External fixing clips |
Edut
Innovative product range of high-quality stainless steel housings as the basis for individual terminal boxes
Reduced assembly and approval effort thanks to ready-equipped terminal boxes
Flange plates possible on four sides of the housing, including seal protection
Housing adjustments using threads, bore holes, and rectangular cutouts with consideration given to normative specifications