CAPAROC PM PN - Power module
1110986

Power module with PROFINET interface for supplying the CAPAROC circuit breaker system with 12 or 24 V DC. Additional system interface for communication with the power supply. For DIN rail installation via the CAPAROC current rails.

Tämä tuote edellyttää muita tuotteita, jotta sitä voidaan käyttää. Pakolliset lisätarvikkeet
Maksuton lataus saatavilla. Ladattavat tiedostot

Tuotetiedot









Yhteensopivat tuotteet




Edut

The benchmark that you can customize by selecting single signals and resets all the way to PROFINET communication
Particularly easy operation for everyone with tool-free assembly, direct feed-in to the busbar, and clear operating states
Exceptionally easy design-in thanks to the comprehensive digital data packet and PROFINET function blocks

Usein kysytyt kysymykset


Is there a hardware tutorial in which the CAPAROC functions are explained?

video thumbnail of faq answer

Yes, there is a hardware tutorial to make getting started with CAPAROC easier.... Näytä lisää

Yes, there is a hardware tutorial to make getting started with CAPAROC easier.

Näytä vähemmän

How many current rails can be connected?

You can connect any number of current rails, but a maximum of 45 A can flow permanently.


How many circuit breaker modules can I switch downstream of a power module?

The number of circuit breaker modules depends on the power module used, the CAPAROC PD 0V potential distributors are passive modules and are not included in the number.
CAPAROC PM S-R  -  20 circuit breaker modules
CAPAROC PM IOL  -  20 channel... Näytä lisää

The number of circuit breaker modules depends on the power module used, the CAPAROC PD 0V potential distributors are passive modules and are not included in the number.
CAPAROC PM S-R  -  20 circuit breaker modules
CAPAROC PM IOL  -  20 channels
CAPAROC PM PN  -  16 circuit breaker modules

Näytä vähemmän

What PROFINET system redundancy does CAPAROC PM PN meet?

The CAPAROC circuit breaker system meets PROFINET system redundancy S1.
However, it is possible to forward S2 signals to the controller via the CAPAROC circuit breaker system.


Where can I find the system manual for the CAPAROC circuit breaker system?

The user manual can be found in the download area for the respective product under “Manual”.


Does the CAPAROC circuit breaker system offer function blocks?

Yes, function blocks for the power module with PROFINET interface for the TIA Portal and CODESYS are available in the download area for the item, as well as in the PLCnext Store for PLCnext Engineer.