RVS 10-TP(2,4X0,8)L
-
Marshalling panel
3192038
Marshalling panel, nom. voltage: 250 V, nominal current: 5 A, connection method: TERMI-POINT®, 1st, 2nd, 3rd, 4th, 5th, 6th, 7th, 8th, 9th and 10th level, cross section: 0.22 mm2 - 0.56 mm2, mounting: NS 35/7,5, NS 35/15, color: gray
Tuotetiedot
| Product type | Potential distributor |
| Number of positions | 1 |
| Number of connections | 20 |
| Number of rows | 1 |
| Potentials | 10 |
| Insulation characteristics | |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Rated surge voltage | 4 kV |
| Number of connections per level | 20 |
| 1st, 2nd, 3rd, 4th, 5th, 6th, 7th, 8th, 9th and 10th level | |
| TERMI-POINT pin dimensions | 2.4 x 0.8 mm |
| Position of the TERMI-POINT pin | vertical |
| Conductor cross section rigid | 0.22 mm² ... 0.56 mm² |
| Cross section AWG | 24 ... 20 (converted acc. to IEC) |
| Conductor cross section flexible | 0.22 mm² ... 0.56 mm² |
| Conductor cross section, flexible [AWG] | 24 ... 20 (converted acc. to IEC) |
| Nominal current | 5 A |
| Maximum load current | 5 A |
| Nominal voltage | 250 V |
| Dimensional drawing |
|
| Width | 6.2 mm |
| Color | gray |
| Flammability rating according to UL 94 | V2 |
| Insulating material group | I |
| Insulating material | PA |
| Mechanical data | |
| Open side panel | No |
| Mounting type | NS 35/7,5 |
| NS 35/15 |
Edut
The red-white marking masks with alternating negative/positive 1 ... 10 or a ... k labeling clearly distinguish the rows of pins and make the process of connecting and finding specific connections much easier
The external housing ridges act as a cable duct side panel, such that good cable routing is ensured and standard cable duct covers can be used
The RVS 10 element has ten 2.4 x 0.8 mm TERMI-POINT®(TP) pins for the incoming and outgoing conductors on both sides of the raised labeling rib