VDFK 4 - Panel feed-through terminal block

0708250

Panel feed-through terminal block, connection method: Screw connection with tension sleeve, Solder connection, number of positions: 1, load current: 32 A, cross section: 0.2 mm² - 6 mm², AWG 24 - 10, connection direction of the conductor to plug-in direction: 0 °, width: 10 mm

Product type	Panel feed-through terminal block
Product family	VDFK 4
Number of positions	1
Pitch	10 mm
Number of connections	2
Number of rows	1
Number of potentials	1
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Nominal current I_N	32 A
Nominal voltage U_N	500 V
Degree of pollution	3
Rated voltage (III/3)	500 V
Rated surge voltage (III/3)	6 kV

Connection technology
Connector system	VDFK 4
Nominal cross section	4 mm²
Conductor connection exterior
Connection method	Screw connection with tension sleeve
Connection direction of the conductor to plug-in direction	0 °
Conductor cross section rigid	0.2 mm² ... 6 mm²
Conductor cross section flexible	0.2 mm² ... 4 mm²
Conductor cross section AWG	24 ... 10
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 4 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 4 mm²
2 conductors with same cross section, solid	0.2 mm² ... 1.5 mm²
2 conductors with same cross section, flexible	0.2 mm² ... 1.5 mm²
2 conductors with same cross section, flexible, with ferrule without plastic sleeve	0.25 mm² ... 1.5 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve	0.5 mm² ... 2.5 mm²
Internal cylindrical gage	A4
Stripping length	8 mm
Tightening torque	0.6 Nm ... 0.8 Nm
Conductor connection interior
Connection method	Solder connection
Connection direction of the conductor to plug-in direction	0 °

Plate thickness	1 mm ... 4 mm

Material data - contact
Note	WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Contact material	Cu alloy
Surface characteristics	tin-plated
Material data - housing
Color (Housing)	gray (7042)
Insulating material	PA
Insulating material group	I
CTI according to IEC 60112	600
Flammability rating according to UL 94	V0
Glow wire flammability index GWFI according to EN 60695-2-12	850
Glow wire ignition temperature GWIT according to EN 60695-2-13	775
Temperature for the ball pressure test according to EN 60695-10-2	125 °C

Safety note
Safety note	• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
	• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
	• The cable entry funnel is not safe to touch. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch protection.
	• To maintain the nominal voltage, cast the terminals on the inside.
	 There is no electrical contact to the housing. Make sure that protective grounding is provided for green/yellow color variants and articles marked with PE.

Dimensional drawing
Pitch	10 mm
Width [w]	10 mm
Height [h]	20.5 mm
Length [l]	25.5 mm
External dimensions
Height [h1]	20.5 mm
Length [l1]	10.9 mm
Internal dimensions
Height [h2]	9.8 mm
Length [l2]	13.6 mm

Air clearances and creepage distances \| 1. Insulation coordination
Application	Internal part molded
Insulating material group	I
Comparative tracking index (IEC 60112)	CTI 600
Rated insulation voltage (III/3)	500 V
Rated surge voltage (III/3)	6 kV
minimum clearance value - non-homogenous field (III/3)	5.5 mm
minimum creepage distance (III/3)	6.3 mm

Type of packaging	packed in cardboard

Tuotenumero	0708250
Pakkausyksikkö	50 Kappaletta
Vähimmäistilausmäärä	50 Kappaletta
Tuoteavain	AA1ACB
Tuotekoodi	AA1ACB
Luettelosivu	Sivu 643 (C-1-2013)
GTIN	4017918004576
Paino kappaletta kohti (sis. pakkauksen)	4,011 g
Paino kappaletta kohti (ilman pakkausta)	4,011 g
Tullitariffinumero	85369010
Alkuperämaa	PL

Approval Specification Data
	Nimellisjännite U_N	Nimellisvirta I_N	Poikkipinta AWG
Use group B
	300 V	30 A	28 - 10
Use group C
	150 V	30 A	28 - 10
Use group D
	300 V	10 A	28 - 10

Approval Specification Data
	Nimellisjännite U_N	Nimellisvirta I_N	Poikkipinta AWG
Use group B
	300 V	30 A	30 - 10
Use group C
	150 V	30 A	30 - 10
Use group D
	300 V	10 A	30 - 10

Approval Specification Data
	Nimellisjännite U_N	Nimellisvirta I_N	Poikkipinta AWG	Poikkipinta mm²
	500 V	32 A		- 4

Approval Specification Data
	Nimellisjännite U_N	Nimellisvirta I_N	Poikkipinta AWG	Poikkipinta mm²
	275 V	32 A		0.2 - 4

Approval Specification Data
	Nimellisjännite U_N	Nimellisvirta I_N	Poikkipinta AWG	Poikkipinta mm²
	275 V	32 A		0.2 - 4

Yhteensopivat tuotteet

ECLASS-11.0	27141134
ECLASS-13.0	27141134
ECLASS-12.0	27141134

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

VDFK 4 - Panel feed-through terminal block

0708250

Tuotetiedot

ECLASS

ETIM

UNSPSC

CSA

cULus Recognized

KEMA-KEUR

ATEX

CCC

IECEx

Yhteensopivat tuotteet

Edut


China RoHS	Environmentally friendly use period: unlimited = EFUP-e
		No hazardous substances above threshold values

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

VDFK 4 - Panel feed-through terminal block 0708250

Tuotetiedot

ECLASS

ETIM

UNSPSC

Yhteensopivat tuotteet

SZS 0,6X3,5 - Screwdriver 1205053

DP-VDFK 4/4 - Spacer plate 0717144

Edut

VDFK 4 - Panel feed-through terminal block

0708250