IB ST ZF 24 BAI 8/EF - I/O module - 2701957

Dimensions

Width	118 mm
Height	116 mm
Depth	117 mm

Interfaces

ST local bus
No. of channels	2
Connection method	ST local bus connector
Transmission speed	500 kbps
Transmission physics	Copper

System properties

Module
ID code (dec.)	127
ID code (hex)	7F
Length code (hex)	4
Length code (dec)	4
Input address area	8 Byte
Output address area	0 Byte
Register length	8 Byte

Input data

Analog:
Input name	Analog inputs
Number of inputs	max. 8 (Voltage or current)
A/D conversion time	max. 10 µs (per channel)
Connection technology	2, 3-conductor
Measuring principle	Successive approximation
Measured value representation	8 bit straight binary (default) or 12 bit two’s complement (can be parameterized)
Analog:
Number of inputs	8 (Voltage inputs)
A/D converter resolution	12 bit (4096 steps; 2.44 mV/quantization steps)
A/D converter resolution		8 bit (256 steps; 39 mV/quantization steps)
Voltage input signal	0 V ... 10 V
		0 V ... 5 V
		0 V ... 25 V
		0 V ... 50 V
Input resistance of voltage input	150 kΩ
Analog:
Number of inputs	8 (Current inputs)
A/D conversion time	max. 10 µs
A/D converter resolution	12 bit (4096 steps; 3.91 µA/quantization steps)
A/D converter resolution		8 bit (256 steps; 62.7 µA/quantization steps)
Current input signal	4 mA ... 20 mA
		0 mA ... 20 mA
		0 mA ... 40 mA
		0 mA ... 60 mA (rms)
		0 mA ... 100 mA (peak)
Input resistance current input	77 Ω

Product properties

Product type	I/O component
Type	modular
	INTERBUS Smart Terminal
Operating mode	Process data mode with 4 words
Diagnostics messages	Failure of the internal I/O supply I/O error message sent to the bus coupler
	F1 fuse failure I/O error message sent to the bus coupler
	I/O supply failure I/O error message sent to the bus coupler

Electrical properties

Maximum power dissipation for nominal condition	0.5 W
Supply: Module electronics
Connection method	ST local bus connector
Designation	Communications power
Supply voltage	9 V DC (from the ST local bus)
Current consumption	typ. 54 mA
Current consumption		max. 80 mA
Power consumption	typ. 0.5 W
Supply:
Designation	U_S
Supply voltage	24 V DC
Supply voltage range	19.5 V DC ... 30.2 V DC (including all tolerances, including ripple)
Current consumption	typ. 45 mA (I_b = 0 mA (I_b = total current for supplying passive sensors for all channels))
Current consumption		typ. 120 mA (I_b = 100 mA (I_b = total current for supplying passive sensors for all channels))
Supply: Passive sensor supply
Designation	U_B (generated internally)
Supply voltage	15 V ±6 %
Current consumption	max. 100 mA (Total for all channels)
Electrical isolation/isolation of the voltage ranges
Test voltage: Bus/Inputs	500 V AC, 50 Hz, 1 min
Test voltage: Supply voltage/inputs	500 V AC, 50 Hz, 1 min
Test voltage: Supply voltage/Ground conductor	500 V AC, 50 Hz, 1 min
Test voltage: I/O voltage/Ground conductor	500 V AC, 50 Hz, 1 min

Connection data

Connection technology
Connection name	Terminal block
Conductor connection
Connection method	Spring-cage connection
Conductor cross-section rigid	0.2 mm² ... 2.5 mm²
Conductor cross-section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 12
Stripping length	8 mm
Terminal block
Connection method	Spring-cage connection
Conductor cross-section, rigid	0.2 mm² ... 2.5 mm²
Conductor cross-section, flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 12
Stripping length	8 mm

Environmental and real-life conditions

Ambient conditions
Ambient temperature (operation)	-25 °C ... 55 °C
Degree of protection	IP20
Air pressure (operation)	80 kPa ... 106 kPa (up to 2000 m above sea level)
Air pressure (storage/transport)	80 kPa ... 106 kPa (up to 2000 m above sea level)
Ambient temperature (storage/transport)	-25 °C ... 70 °C
Permissible humidity (operation)	10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	10 % ... 95 % (non-condensing)

Standards and regulations

Protection class	III (IEC 61140, EN 61140, VDE 0140-1)

Mounting

Tuotenumero	2701957
Pakkausyksikkö	1 Kappaletta
Vähimmäistilausmäärä	1 Kappaletta
Tuoteavain	DRI341
Tuotekoodi	DRI341
GTIN	4046356895767
Paino kappaletta kohti (sis. pakkauksen)	570,2 g
Paino kappaletta kohti (ilman pakkausta)	570,2 g
Tullitariffinumero	85389091
Alkuperämaa	DE

ECLASS-13.0	27242601
ECLASS-15.0	27242601

EU RoHS
Täyttää RoHS-direktiivin vaatimukset	Kyllä
poikkeussäännökset siltä osin kuin ne ovat tiedossa	6(a), 6(a)-I, 6(c), 7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-E Ei raja-arvot ylittäviä vaarallisia aineita
EU REACH SVHC
Huomautus REACH-kandidaattiaineesta (CAS-nro)	Lead (CAS-nro: 7439-92-1)

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

IB ST ZF 24 BAI 8/EF - I/O module

2701957

Tuotetiedot

ECLASS

ETIM

UNSPSC

Yhteensopivat tuotteet

Edut

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

IB ST ZF 24 BAI 8/EF - I/O module 2701957

Tuotetiedot

ECLASS

ETIM

UNSPSC

Yhteensopivat tuotteet

IB ST LBC - Bridge 2836492

EB 84 IB ST BU - Insertion bridge 2836269

EB 84 IB ST RD - Insertion bridge 2836272

IBS TR5 0,2AT - Fuse 2753452

IBS TR5 0,4AT - Fuse 2753478

IB STME 24 BAI 8/EF - Replacement electronics module 2701956

Edut

IB ST ZF 24 BAI 8/EF - I/O module

2701957