SACC-DSI-FSX-8CON-M16-L180 SCOX
   - 
  Device connector rear mounting
    
      1237405
      
      
    
  
      Tuotetiedot
| Notes on operation | The electrical and mechanical data specified assumes that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of pollution, the connector must be sealed using a protective cap >IP54. Influences arising from litz wires, cables, or PCB mounting must also be taken into consideration. Additional mechanical fixing of the PCB is required. | 
| Order information: | Lock nut is included in the scope of delivery | 
| Mounting type | Rear mounting (M16 x 1,5) | 
| Tightening torque | 2 Nm ... 3 Nm (Installation-side) | 
| Product type | Circular connectors (device side) | 
| Sensor type | Ethernet | 
| Number of positions | 8 | 
| Shielded | yes | 
| Coding | X | 
| Thread type | M12 | 
| Insulation characteristics | |
| Overvoltage category | III | 
| Degree of pollution | 3 | 
| Length of the solder pin | 6 mm | 
| 6 mm | 
| Material Housing | GD-Zn | 
| Material Housing surface | Ni | 
| Material Insulating body | PPA | 
| Material Contact | CuZn | 
| Material Contact surface | Au | 
| Material Seal | FKM | 
| Flammability rating according to UL 94 | V0 | 
| Rated surge voltage | 0.8 kV | 
| Contact resistance | ≤ 3 mΩ | 
| Insulation resistance | > 100 MΩ | 
| Nominal voltage UN | 48 V AC | 
| 60 V DC | |
| Nominal current IN | 0.5 A (Data) | 
| Transmission characteristics (category) | CAT6A | 
| Conductor connection | |
| Connection method | Wave soldering | 
| Contact connection type | Socket | 
| Tightening torque | 2 Nm ... 3 Nm (Installation-side) | 
| Mechanical data | |
| Insertion/withdrawal cycles | ≥ 100 | 
| Connection 1 | |
| Head design | Socket | 
| Head cable outlet | straight | 
| Head thread type | M12 | 
| Head locking type | SPEEDCON | 
| Coding | X | 
| Signal type/category | Ethernet CAT6A | 
| Ambient conditions | |
| Degree of protection | IP67 (When plugged in) | 
| Ambient temperature (operation) (male connector/female connector) | -25 °C ... 85 °C (Plug / socket) | 
| -40 °C ... 85 °C (without mechanical actuation) | |
| UL Type Rating | Type 4 (indoor use only) | 
| Standard designation | M12 circular connector | 
| Standards/specifications | according to IEC 61076-2-109 | 
| Standard designation | Shock, vibration | 
| Standards/specifications | according to EN 50155 | 
| Standard designation | Shock, vibration | 
| Standards/specifications | according to EN 61373:2011 | 
| Tuotenumero | 1237405 | 
| Pakkausyksikkö | 20 Kappaletta | 
| Vähimmäistilausmäärä | 20 Kappaletta | 
| Tuoteavain | ABQEHB | 
| Tuotekoodi | ABQEHB | 
| GTIN | 4063151431426 | 
| Paino kappaletta kohti (sis. pakkauksen) | 16,89 g | 
| Paino kappaletta kohti (ilman pakkausta) | 15,709 g | 
| Tullitariffinumero | 85366990 | 
| Alkuperämaa | DE | 
ECLASS
| ECLASS-13.0 | 27440110 | 
| ECLASS-15.0 | 27440110 | 
ETIM
| ETIM 9.0 | EC003568 | 
UNSPSC
| UNSPSC 21.0 | 26121600 | 
| EU RoHS | |
| Täyttää RoHS-direktiivin vaatimukset | Kyllä (Ei poikkeussäännöksiä) | 
| China RoHS | |
| Environment friendly use period (EFUP) | 
              EFUP-E
               Ei raja-arvot ylittäviä vaarallisia aineita 
             | 
          
| EU REACH SVHC | |
| Huomautus REACH-kandidaattiaineesta (CAS-nro) | Aineen pitoisuus ei ole yli 0,1 %. | 
Yhteensopivat tuotteet
Edut
Easy PCB assembly: one-piece connectors for wave soldering
        All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design
        For high transmission reliability: optional shield connection to the housing by means of shield contact
        PHOENIX CONTACT OY
        
        Niittytie 11, 01300 Vantaa