MCS-78X64X42-IP6X-7035
-
Electronics housing
1524047
Electronics housing, color: light gray (similar RAL 7035), degree of protection: IP65/67, dimensions: 78 x 64 x 42 mm, includes upper housing part, lower housing part, screws for housing and PCB mounting
Tuotetiedot
| Recommendation | Further information and detailed dimensions are available in the download area. |
| Recommendation | Do not stick anything to or damage the DAE membrane. |
| Note on application | We recommend the MCS-H-40-3031 living hinge so the housing parts can be removed without losing them. |
| PCB surface | The PCB surface specification is for orientation purposes and is based on a basic PCB. The housing can also accommodate several PCBs. |
| Assembly note | Tighten the mounting screws crosswise. |
| Product type | Complete housing |
| Housing type | Field housing |
| Housing series | MCS |
| Product family | MCS-78X64 |
| Ventilation | integrated pressure compensation membrane |
| Dimensional drawing |
|
| Width | 78 mm |
| Height | 64 mm |
| Depth | 42 mm |
| PCB design | |
| PCB thickness | 0 mm ... 1.8 mm |
| Color (Housing) | light gray (RAL 7035) |
| Material (Housing) | PA-GF |
| Material (Mounting screws) | Stainless steel V2A |
| Material (PCB screw) | Steel |
| Flammability rating according to UL 94 | V0 |
| CTI according to IEC 60112 | 600 |
| Surface characteristics | untreated |
| Vibration test | |
| Specification | IEC 60068-2-6:2007-12 |
| Frequency | 10 - 150 - 10 Hz |
| Sweep speed | 1 octave/min |
| Amplitude | 0.15 mm (10 Hz ... 58.1 Hz) |
| Acceleration | 2g (58.1 Hz ... 150 Hz) |
| Test duration per axis | 2.5 h |
| Test directions | X-, Y- and Z-axis |
| Glow-wire test | |
| Specification | IEC 60695-2-11:2021-10 |
| Temperature | 850 °C |
| Time of exposure | 30 s |
| Thermal stability / ball thrust test | |
| Specification | IEC 60695-10-2:2014-02 |
| Temperature | 125 °C |
| Test duration | 1 h |
| Force | 20 N |
| Mechanical strength / tumbling barrel | |
| Specification | IEC 60068-2-31:2008-05 |
| Height of fall | 50 cm |
| Frequency | 10 |
| Shocks | |
| Specification | IEC 60068-2-27:2008-02 |
| Pulse shape | Half-sine |
| Acceleration | 15g |
| Shock duration | 11 ms |
| Number of shocks per direction | 3 |
| Test directions | X-, Y- and Z-axis (pos. and neg.) |
| Test for substances that would hinder coating with paint or varnish | |
| Specification | VDMA 24364:2018-05 |
| Result | Test passed |
| Degree of protection (IP code) | |
| Specification | IEC 60529:1989-11 + AMD 1:1999-11 + AMD 2:2013-08 |
| Result, degree of protection, IP code | IP67 |
| Ambient conditions | |
| Max. IP code to attain | IP65/67 |
| Max. NEMA code to attain | 6 |
| Impact strength | IK07 |
| Ambient temperature (operation) | -40 °C ... 85 °C (depending on power dissipation) |
| Ambient temperature (storage/transport) | -40 °C ... 55 °C |
| Ambient temperature (assembly) | -5 °C ... 85 °C |
| Relative humidity (storage/transport) | 80 % |
| Number of PCB holders | 2 |
| Type of PCB mount | Bolt mounting |
| Total PCB surface | 2600 mm² |
| Thickness of the PCB | 0 mm ... 1.8 mm |
| Mounting type | Panel mounting |
| Mounting position | any |
| Mounting (Screw connection between housing halves) | 2.2 Nm ... 2.5 Nm (Torx® (TX 20)) |
| Mounting (Mounting the PCB) | 0.5 Nm (Torx® with longitudinal slot (TX 7)) |
| Type of packaging | Box packaging |
Edut
Convenient operation during device installation and maintenance thanks to optional hinges on the housing cover
Flexible mounting thanks to the optional adapter plate
Safe operation with the right degree of protection
Individualized product selection due to the modular system
Optimized PCB installation: PCB can be installed in a nearly horizontal orientation thanks to the angled housing edge
Usein kysytyt kysymykset
Why is a permanently installed seal used?
A permanently installed seal provides proper closure. Plus, the seal stays on the housing and cannot be lost.
Is pressure compensation an option?
The pressure compensation element is already preinstalled for the housing versions that meet IP67/IP65.
Where can I mount the housing?
The housing can be mounted on walls, masts, aluminum profiles, or even DIN rails – an optional adapter plate makes this possible.
How is the housing mounted on or removed from the adapter plate?
Mounting is tool-free. The housing is latched onto the adapter plate during mounting. You can also secure the housing with screws (can be ordered separately). To remove the housing, remove the screws (if used) and use a screwdriver or similar to leve... Näytä lisää
Mounting is tool-free. The housing is latched onto the adapter plate during mounting. You can also secure the housing with screws (can be ordered separately). To remove the housing, remove the screws (if used) and use a screwdriver or similar to lever out the latching mechanisms via the recesses in the adapter plate.
Näytä vähemmänWhat colors and other customization options are there?
You put your custom housing together using the modular system. Several RAL colors are available. Furthermore, different frame versions and additional accessories can be combined in different ways. Please ask us for further customer-specific customizations.
Can the components be connected together?
A living hinge, which can also be retrofitted, keeps the cover on the housing and keeps the hands free.
What is the IP degree of protection of the housing?
The housing is available in IP40 or IP65/IP67 versions.
What colors are there, and what colors are possible?
The housing and the adapter plate are available in RAL7035 (light gray). The frames are available in the color versions RAL7035 (light gray), RAL9005 (jet black), RAL5015 (sky blue), and RAL1018 (zinc yellow). Customer-specific color versions can be requested.
What application options are there?
The housings are particularly suitable for use in building technology or industry. However, due to the versatile and robust housing, other areas of application are also possible.