FB-12SP
-
Device coupler
2316310
Device coupler for Foundation Fieldbus and PROFIBUS PA with terminal connections for 12 spurs connected to fieldbus end devices.
Tuotetiedot
| Note on application | |
| Note on application | Only for industrial use |
| Utilization restriction | |
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
| Product type | Device coupler |
| MTTF | 723 Years (25 degrees C) |
| Supply | |
| Supply voltage range | 10.5 V DC ... 32 V DC (input on trunk line side) |
| Typical current consumption | 6.5 mA |
| Supply | |
| Conductor cross section, flexible | 2.50 mm² ... 0.20 mm² |
| Conductor cross section, rigid | 2.50 mm² ... 0.20 mm² |
| Conductor cross section, flexible [AWG] | 24 ... 12 |
| Conductor cross section AWG | 24 ... 12 |
| Safety data | |
| Input voltage Ui | 32 V (IIB (C/D)) |
| 24 V (IIC (A/B)) | |
| 17.5 V (FISCO) | |
| Inductance Li | 4 µH |
| Capacitance Ci | 0 µF |
| Max. output voltage Uo | Uin (Branch line) |
| Max. output current Io | 56 mA (Branch line) |
| Max. output power Po | 1.792 W |
| Current consumption | 6.5 mA (Maximum, no load) |
| 0.68 A (maximum trunk current) | |
| IIC/IIB (Branch line): Max. external inductivity Lo / Max. external capacitance Co | / 80 nF |
| 0.26 mH | |
| Signal | FOUNDATION Fieldbus |
| PROFIBUS | |
| Data: Foundation Fieldbus and PROFIBUS PA Segment | |
| Connection method | Pluggable COMBICON screw connection for each spur |
| No. of channels | 12 |
| Termination resistor | 100 Ω, external removable plug included |
| 100 Ω (external removable plug) | |
| Conductor cross section flexible max. | 2.5 mm² |
| Conductor cross section flexible min. | 0.2 mm² |
| Conductor cross section, rigid max. | 2.5 mm² |
| Conductor cross section, rigid min. | 0.2 mm² |
| Conductor cross section AWG max. | 12 |
| Conductor cross section AWG min. | 24 |
| Output nominal voltage | ≤ 32 V (each spur) |
| Output current | 38 mA |
| Dimensional drawing |
|
| Width | 254.1 mm |
| Height | 112.5 mm |
| Depth | 83.5 mm |
| Flammability rating according to UL 94 | V0 |
| Corrosive resistance in accordance with ANSI-ISA 71.04-1985 - Severity level G3 | : |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -50 °C ... 90 °C |
| Ambient temperature (storage/transport) | -50 °C ... 90 °C |
| Altitude | 2000 m |
| Max. permissible relative humidity (operation) | < 95 % (non-condensing) |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | non-condensing |
| Shock | 30g, 11 ms |
| Vibration (operation) | 5g, 10 Hz ... 150 Hz |
| ATEX | |
| Identification | II 3(3)G Ex nA [ic] IIC T4 Gc, Entity/FISCO ic spurs |
| Ex nA [nL] IIC T4 Gc | |
| Ex ic IIC T4 Gc, FISCO ic | |
| Certificate | Sira 13ATEX4247X |
| IECEx | |
| Identification | Ex nA [ic] IIC T4 Gc, Entity/FISCO ic spurs |
| Ex nA [nL] IIC T4 Gc | |
| Ex ic IIC T4 Gc, FISCO ic | |
| Certificate | IECEx SIR 13.0089X |
| CSA, USA/Canada | |
| Identification | Class I, Div. 2, Groups A, B, C, D |
| Ex nA [nL] IIC T4 Gc | |
| Class I, Zone 2, AEx nA [nC] IIC T4 Gc | |
| UL, USA | |
| Identification | Class I, Zone 2 |
| AEx nA [ic] IIC T4, Entity/FISCO spurs | |
| Ex nA [ic] IIC T4 Gc | |
| Class I, Div. 2, Groups A, B, C, D T4 | |
| UKCA Ex (UKEX) | |
| Identification | II 3(3)G Ex nA [ic] IIC T4 Gc, Entity/FISCO ic spurs |
| Ex nA [nL] IIC T4 Gc | |
| Ex ic IIC T4 Gc, FISCO ic | |
| Certificate | PxCAI22UKEx2316307X |
| CCC | |
| Identification | Ex ec [ic] IIC T4 Gc |
| Ex ic IIC T4 Gc | |
| Standards | |
| Standards/regulations | EN 60079-0:2011, EN 60079-11:2012, EN 60079-15:2005, EN 60079-15:2010 |
| IEC 60079-0:2011, IEC 60079-11:2011, IEC 60079-15:2005, IEC 60079-15:2010 | |
| Standards/regulations | |
| Standards/regulations | Ring wave noise immunity in acc. with IEC 61000-4-12 |
| Standards/regulations | |
| Standards/regulations | Dry heat in acc. with IEC 61131-2 |
| Standards/regulations | |
| Standards/regulations | Damp heat in acc. with IEC 61131-2 |
| Standards/regulations | |
| Standards/regulations | Shock and vibration in acc. with EN 61131-2 and EN 50178 |
| Standards/regulations | IEC 61158-2 |
| Mounting position | On horizontal and vertical DIN rail NS 35 in acc. with EN 60715 |
Edut
Provides current limiting short-circuit protection per spur
Connect up to 12 Foundation Fieldbus or PROFIBUS PA field devices
Terminator preinstalled
Single-sided plug configuration eliminates cable bend radius issues
Ex nA [nL, Ex nA [ic] or FISCO ic spur connections