ECM-UC-100A-MRTU - Current measuring transducer - 1191986

Tuotetiedot

Tekniset tiedot

Product properties

Product type	Current measuring transducer
Insulation characteristics
Insulation	Safe isolation in accordance with IEC/EN 61010-1
Overvoltage category	III (300 V)
Pollution degree	2

Electrical properties

Step response (10-90%)	200 ms (AC/DC)
Step response (10-90%)		20 ms (DC)
Maximum temperature coefficient	< 0.03 %/K
Maximum transmission error	0.5 % (of nominal range value under nominal conditions)
Rated insulation voltage	300 V AC (to earth)
Electrical isolation IEC 61010-2-030
Standards/regulations	IEC 61010-2-030
Measuring category	III (300 V)
Electrical isolation Input/output
Test voltage	4 kV AC (50 Hz, 60 s)
Electrical isolation Input/power supply
Test voltage	4 kV AC (50 Hz, 60 s)
Electrical isolation Output/supply
Test voltage	2 kV AC (50 Hz, 60 s)
Supply
Nominal supply voltage	24 V DC
Nominal supply voltage range	12 V DC ... 24 V DC -20 % ... +25 %
Supply voltage range	9.6 V DC ... 30 V DC
Power consumption	≤ 1.8 W (30 V DC)

Input data

Measurement
Input current range	0 A AC ... 100 A AC
Input current range		-100 A DC ... 100 A DC
Measuring range	0 A AC/DC ... 50 A AC/DC
Setting range for min. input current	0 A AC/DC ... 9.4 A AC/DC
Setting range for min. input current		0 A AC/DC ... 18.8 A AC/DC
Setting range for max. input current	0 A AC/DC ... 62.5 A AC/DC (DIN/EN 61010-1)
		0 A AC/DC ... 125 A AC/DC (DIN/EN 61010-1)
		-125 A DC ... 125 A DC (DIN/EN 61010-1)
Overload capacity	2 x I_N (continuous), depending on the fed-through conductor
Surge strength	20 x I_N (1 s), depending on the fed-through conductor
Frequency measuring range	0 Hz
		10 Hz ... 100 Hz
		10 Hz ... 200 Hz
		10 Hz ... 500 Hz
		10 Hz ... 1000 Hz
Curve type	AC, DC or distorted currents

Connection data

Connection method	Push-in connection
Stripping length	10 mm
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 13
Circular conductor
Conductor cross section rigid	25 mm²
Conductor cross section AWG	3

Interfaces

WBM
Designation	WBM: Default address, USB-C interface
IP address	192.168.128.1
Modbus RTU
Designation	Modbus/RTU interface configuration
Note	Register contents, see register table
Connection method	RS-485
Address setting	Modbus default address: 1
Parity	even
Stop bit	1
Data bits	8
Transmission speed	19200 baud

Dimensions

Item dimensions
Width	22.6 mm
Height	106.7 mm
Depth	113.8 mm
Depth (Device depth (DIN rail mounting))	114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)
Circular conductor
Diameter	11 mm

Material specifications

Color	gray (RAL 7042)
Flammability rating according to UL 94	V0 (Housing)
Housing material	PA 6.6-FR

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 60 °C
	-40 °F ... 140 °F
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	≤ 4000 m
Permissible humidity (operation)	≤ 95 % (non-condensing)

Approvals

CE
Certificate	CE-compliant
UKCA
Certificate	UKCA-compliant
UL, USA/Canada
Identification	Ind. Cont. Eq. E238705-E196811

EMC data

Electromagnetic compatibility	Conformance with EMC directive
Low Voltage Directive	Conformance with Low Voltage Directive
Noise immunity	EN 61000-6-2
Noise emission
Standards/regulations	EN 61000-6-4

Standards and regulations

Standards/regulations	IEC 61010-1

Mounting

Mounting position	vertical or horizontal

Kaupalliset tiedot

Tuotenumero	1191986
Pakkausyksikkö	1 Kappaletta
Vähimmäistilausmäärä	1 Kappaletta
Tuoteavain	CMMA34
Tuotekoodi	CMMA34
GTIN	4063151244200
Paino kappaletta kohti (sis. pakkauksen)	141,2 g
Paino kappaletta kohti (ilman pakkausta)	141,2 g
Tullitariffinumero	85437090
Alkuperämaa	DE

Luokitukset

Hyväksynnät

Environmental product compliance

Yhteensopivat tuotteet

ECLASS-13.0	27210123
ECLASS-15.0	27210123

EU RoHS
Täyttää RoHS-direktiivin vaatimukset	Kyllä
poikkeussäännökset siltä osin kuin ne ovat tiedossa	7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 Löydät tuotekohtaisen Kiinan RoHS-ilmoitusluettelon kunkin tuotteen latausalueelta Valmistajan ilmoitus -kohdasta. EFUP-E-merkinnän sisältäville tuotteille ei tarvita Kiinan RoHS-ilmoitusluetteloa, eikä sitä tarvitse siksi laatia.
EU REACH SVHC
Huomautus REACH-kandidaattiaineesta (CAS-nro)	Lead (CAS-nro: 7439-92-1)

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

ECM-UC-100A-MRTU - Current measuring transducer

1191986

Tuotetiedot

ECLASS

ETIM

cULus Listed

cULus Listed

cULus Listed

Yhteensopivat tuotteet

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

ECM-UC-100A-MRTU - Current measuring transducer 1191986

Tuotetiedot

ECLASS

ETIM

Yhteensopivat tuotteet

SZS 0,6X3,5 - Screwdriver 1205053

ECM-UC-100A-MRTU - Current measuring transducer

1191986