Buffer module - QUINT4-BUFFER/24DC/20
2907913

QUINT buffer module with maintenance-free capacitor-based energy storage for DIN rail mounting, input: 24 V DC, output: 24 V DC/20 A, including mounted UTA 107 universal DIN rail adapter.


Tuotetiedot


Bridge failures lasting several seconds with the buffer modules from the QUINT range for DIN rails. The QUINT BUFFER combines an electronic switch-over unit and maintenance-free, capacitor-based energy storage in the same housing.



Input voltage 24 V DC (SELV)
Input voltage range 22.5 V DC ... 30 V DC
Fixed backup threshold < 22 V DC
Voltage type of supply voltage DC
Current consumption Imax (UN, IOUT = IStat.Boost, Icharge = max) 26 A (max.)
Current consumption INo-Load(UN, IOUT = 0, Icharge = 0) 0.2 A (No-load)
Current consumption Icharge (UN, IOUT = 0, Icharge = max) 0.6 A (charging process)
Buffer time 0.2 s (20 A)
2 s (2 A)

Efficiency > 98 % (with charged energy storage device)
Connection in parallel no
Connection in series No
Mains operation
Output voltage 24 V DC (depending on the input voltage)
Output current IN 20 A
Static Boost (IStat.Boost) 25 A (15 ms)
Dynamic Boost (IDyn.Boost) 30 A (5 s)
Power loss nominal load max. < 6 W
Buffer mode
Output voltage typ. 22 V DC
Output current IN 20 A (depending on output current)
Static Boost (IStat.Boost) 25 A
Power loss nominal load max. < 6 W
Signal state Ready
Connection labeling 3.3
Switching output Transistor output, active
State (configurable) Ready
State condition (configurable) State of charge = 100% or buffer mode
Output can be loaded 20 mA
Signal state UIN OK
Connection labeling 3.1, 3.2
Switching output Electronic relays (OptoMOS)
State (configurable) UIn OK
Output can be loaded 200 mA
LED status indicator green (UIn OK)
Signal threshold Input voltage in the valid range
Signal ground SGnd
Connection labeling 3.4
Function Signal ground
Reference potential 3.3 Ready

Nominal capacity 0.001 Ah
IQ-Technology no

Input
Position 1.x
Conductor connection
Connection method Screw connection
rigid 0.2 mm² ... 6 mm²
flexible 0.2 mm² ... 4 mm²
flexible with ferrule without plastic sleeve 0.2 mm² ... 6 mm²
flexible with ferrule with plastic sleeve 0.2 mm² ... 4 mm²
rigid (AWG) 30 ... 10
Stripping length 8 mm
Torque 0.5 Nm ... 0.6 Nm
Drive form screw head Slotted L
Output
Position 2.x
Conductor connection
Connection method Screw connection
rigid 0.2 mm² ... 6 mm²
flexible 0.2 mm² ... 4 mm²
flexible with ferrule without plastic sleeve 0.2 mm² ... 6 mm²
flexible with ferrule with plastic sleeve 0.2 mm² ... 4 mm²
rigid (AWG) 30 ... 10
Stripping length 8 mm
Torque 0.5 Nm ... 0.6 Nm
Drive form screw head Slotted L
Signal
Position 3.x
Conductor connection
Connection method Push-in connection
rigid 0.2 mm² ... 1.5 mm²
flexible 0.2 mm² ... 1.5 mm²
flexible with ferrule without plastic sleeve 0.2 mm² ... 1.5 mm²
flexible with ferrule with plastic sleeve 0.2 mm² ... 0.75 mm²
rigid (AWG) 24 ... 16
Stripping length 8 mm

Insulation voltage input, output / housing 500 V

Product type Buffer module
MTBF (IEC 61709, SN 29500) 2497464 h (40 °C)
Insulation characteristics
Protection class Special application (SELV input voltage, hazardous voltages are generated in the device).
Overvoltage category I
Degree of pollution 2
Life expectancy (electrolytic capacitors)
Time 88224 h

Width 56 mm
Height 130 mm
Depth 125 mm
Installation dimensions
Installation distance right/left 0 mm / 0 mm
Installation distance top/bottom 50 mm / 50 mm

Assembly instructions alignable: horizontally 0 mm, vertically 50 mm
Mounting position horizontal DIN rail NS 35, EN 60715

Housing material Metal

Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -25 °C ... 70 °C (> 40 °C Derating: 1 %/K / > 60 °C Derating: 2.5 %/K)
Ambient temperature (storage/transport) -40 °C ... 70 °C
Ambient temperature (start-up type tested) -40 °C
Maximum altitude ≤ 4000 m
Climatic class 3K3 (in acc. with EN 60721)
Max. permissible relative humidity (operation) ≤ 95 %

Electrical safety
Standards/specifications IEC 60950-1/VDE 0805 (SELV)

UL
Designation UL
Identification UL Listed UL 508
UL
Designation UL
Identification UL/C-UL Recognized UL 60950-1

Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC
Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
EMC requirements for noise emission EN 61000-6-3
EN 61000-6-4
EMC requirements for noise immunity EN 61000-6-1
EN 61000-6-2
Noise emission EN 55016
EN 61000-6-3
Noise immunity Immunity according to EN 61000-6-2 (industrial)
Electrostatic discharge
Standards/regulations EN 61000-4-2
Electrostatic discharge
Contact discharge 6 kV (Test Level 3)
Discharge in air 8 kV (Test Level 3)
Comments Criterion A
Electromagnetic HF field
Standards/regulations EN 61000-4-3
Electromagnetic HF field
Frequency range 80 MHz ... 6 GHz
Test field strength 10 V/m
Comments Criterion A
Fast transients (burst)
Standards/regulations EN 61000-4-4
Fast transients (burst)
Input 2 kV (Test Level 3 - asymmetrical)
Output 2 kV (Test Level 3 - asymmetrical)
Signal 2 kV (Test Level 3 - asymmetrical)
Comments Criterion A
Surge voltage load (surge)
Input 1 kV (Test Level 2 - symmetrical)
2 kV (Test Level 3 - asymmetrical)
Output 1 kV (Test Level 2 - symmetrical)
2 kV (Test Level 3 - asymmetrical)
Signal 1 kV (Test Level 2 - asymmetrical)
Comments Criterion A
Conducted interference
Standards/regulations EN 61000-4-6
Conducted interference
Frequency range 0.15 MHz ... 80 MHz
Comments Criterion A
Voltage 10 V
Criterion A Normal operating behavior within the specified limits.
Criterion B Temporary impairment to operational behavior that is corrected by the device itself.

Tuotenumero 2907913
Pakkausyksikkö 1 Kappaletta
Vähimmäistilausmäärä 1 Kappaletta
Tuoteavain CMUIE3
Tuotekoodi CMUIE3
Luettelosivu Sivu 345 (C-4-2019)
GTIN 4055626309040
Paino kappaletta kohti (sis. pakkauksen) 1 069,9 g
Paino kappaletta kohti (ilman pakkausta) 997 g
Tullitariffinumero 85322900
Alkuperämaa CN


ECLASS

ECLASS-9.0 27049201
ECLASS-11.0 27040692

ETIM

ETIM 8.0 EC002850

UNSPSC

UNSPSC 21.0 26111700

cUL Recognized

Hyväksyntätunnus: FILE E 211944

UL Recognized

Hyväksyntätunnus: FILE E 211944

EAC

Hyväksyntätunnus: RU S-DE.BL08.W.00764

UL Listed

Hyväksyntätunnus: FILE E 123528

cUL Listed

Hyväksyntätunnus: FILE E 123528

cUL Listed

Hyväksyntätunnus: FILE E 199827

UL Listed

Hyväksyntätunnus: FILE E 199827

cULus Recognized

cULus Listed

cULus Listed


REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 25;
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Yhteensopivat tuotteet

Edut

Space savings, thanks to the compact design
Maintenance-free due to electrolytic capacitors
Thanks to soft start, can also be used with power supplies in the low power range