Module plate
8 mounting screws (M5x12) /
and
Washers are supplied as standard
MD-INB24-4-SZP-S
-
Module plate
1415243
Module plate, with seal, for CES B24 sealing frames, with 4 openings, including mounting screws
Tuotetiedot
| General | incl. mounting screws |
| Seal present | yes |
| Tightening torque | 1 ... 1.2 Nm |
| Dimensional drawing |
|
| Width | 168 mm |
| Height | 2 mm |
| Length | 338 mm |
| Material | Stainless steel 1.4301/AISI 304 |
| Seal material | NBR |
| Ambient conditions | |
| Degree of protection | IP54 |
| Ambient temperature (operation) | -40 °C ... 100 °C |
| Assembly note | Diameter of fixing hole for self-tapping screw: 4.5 mm ... 4.7 mm, mounting screws (M5x12): 1.0 Nm ... 1.2 Nm tightening torque, SW4 Allen key |
| Make sure the seal is fitted correctly (must not be be squeezed out at the sides) |