MUT 6-PE - Mini protective conductor terminal block - 3248040

Detalii despre produs

Number of positions	1
Number of connections	2
Number of rows	1
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Rated surge voltage	6 kV
Maximum power dissipation for nominal condition	0 W

Grounding foot	Yes
Number of connections per level	2
Nominal cross section	6 mm²
Rated cross section AWG	10
Connection method	Screw connection
Screw thread	M3
Note	Please observe the current carrying capacity of the DIN rails.
Tightening torque	0.6 ... 0.8 Nm
Stripping length	8 mm ... 9 mm
Internal cylindrical gage	A5
	B4
Conductor cross-section rigid	0.2 mm² ... 10 mm²
Cross section AWG	24 ... 8 (converted acc. to IEC)
Conductor cross-section flexible	0.25 mm² ... 6 mm²
Conductor cross-section, flexible [AWG]	24 ... 10 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)	0.25 mm² ... 6 mm²
Flexible conductor cross-section (ferrule with plastic sleeve)	0.25 mm² ... 6 mm²
Nominal cross section	6 mm²

Rated data (ATEX/IECEx)
Identification	 II 2 GD Ex eb IIC Gb
Operating temperature range	-60 °C ... 110 °C
Ex-certified accessories	3248033 D-MUT 2,5/4
	1205053 SZS 0,6X3,5
	3022263 CLIPFIX 15
output	(Permanent)
Ex connection data General
Torque range	0.6 Nm ... 0.8 Nm
Connection capacity rigid	0.2 mm² ... 10 mm²
Connection capacity AWG	24 ... 8
Connection capacity flexible	0.25 mm² ... 6 mm²
Connection capacity AWG	24 ... 10
2 conductors with same cross section, solid	0.2 mm² ... 2.5 mm²
2 conductors with the same cross-section AWG rigid	24 ... 14
2 conductors with same cross section, stranded	0.2 mm² ... 2.5 mm²
2 conductors with the same cross-section AWG flexible	24 ... 14

Width	8.2 mm
End cover width	2.2 mm
Height	29.9 mm
Depth on NS 15	34 mm

Color	green-yellow
Flammability rating according to UL 94	V0
Insulating material group	I
Insulating material	PA
Static insulating material application in cold	-60 °C
Relative insulation material temperature index (Elec., UL 746 B)	130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22	HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23	HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24	HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26	HL 1 - HL 3
Surface flammability NFPA 130 (ASTM E 162)	passed
Specific optical density of smoke NFPA 130 (ASTM E 662)	passed
Smoke gas toxicity NFPA 130 (SMP 800C)	passed

Mechanical data
Open side panel	Yes

Oscillation/broadband noise
Specification	DIN EN 50155 (VDE 0115-200):2018-05
Spectrum	Long life test category 2, bogie-mounted
Frequency	f₁ = 5 Hz to f₂ = 250 Hz
ASD level	6.12 (m/s²)²/Hz
Acceleration	3.12g
Test duration per axis	5 h
Test directions	X-, Y- and Z-axis
Result	Test passed
Shocks
Specification	DIN EN 50155 (VDE 0115-200):2018-05
Pulse shape	Half-sine
Acceleration	30g
Shock duration	18 ms
Number of shocks per direction	3
Test directions	X-, Y- and Z-axis (pos. and neg.)
Result	Test passed
Ambient conditions
Ambient temperature (operation)	-60 °C ... 110 °C (Operating temperature range incl. self-heating; for max. short-term operating temperature, see RTI Elec.)
Ambient temperature (storage/transport)	-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)	-5 °C ... 70 °C
Ambient temperature (actuation)	-5 °C ... 70 °C
Permissible humidity (operation)	20 % ... 90 %
Permissible humidity (storage/transport)	30 % ... 70 %

Mounting type	NS 15

Date comerciale

Număr articol	3248040
Unitate de ambalare	50 Bucată
Cantitate minimă pentru comandă	1 Bucată
Cod produs	BE1161
GTIN	4046356817608
Greutate pe bucată (inclusiv ambalajul)	9,747 g
Greutate pe bucată (fără ambalaj)	9,747 g
Cod tarifar vamal	85369010
Țara de origine	CN

Clasificări

Aprobări

Approval Specification Data
	Tensiune nominală U_N	Curent nominal I_N	Secțiune transversală AWG	Secțiune transversală mm²
B
			24 - 8
C
			24 - 8
D
			24 - 8

Approval Specification Data
	Tensiune nominală U_N	Curent nominal I_N	Secțiune transversală AWG	Secțiune transversală mm²
B
			24 - 8
C
			24 - 8
F
			24 - 8
D
			24 - 8

Approval Specification Data
	Tensiune nominală U_N	Curent nominal I_N	Secțiune transversală AWG	Secțiune transversală mm²
keine
Only flexible conductors				0.2 - 6
Only rigid conductors				0.2 - 10

Approval Specification Data
	Tensiune nominală U_N	Curent nominal I_N	Secțiune transversală AWG	Secțiune transversală mm²
keine
Only flexible conductors				0.2 - 6
Only rigid conductors				0.2 - 10

Environmental product compliance

ECLASS-13.0	27250103
ECLASS-15.0	27250103

EU RoHS
Îndeplineşte cerinţele conform directivei RoHS	Da (Nicio reglementare privind excepţiile)
China RoHS
Environment friendly use period (EFUP)	EFUP-E Nu există substanțe periculoase peste valorile limită
EU REACH SVHC
Trimitere la substanţa candidată REACH (nr. CAS)	Nicio substanţă cu un procentaj masic mai mare de 0,1 %

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

MUT 6-PE - Mini protective conductor terminal block

3248040

Detalii despre produs

ECLASS

ETIM

UNSPSC

CSA

cULus Recognized

DNV

EAC

ATEX

IECEx

CCC

Produse compatibile

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

MUT 6-PE - Mini protective conductor terminal block 3248040

Detalii despre produs

ECLASS

ETIM

UNSPSC

Produse compatibile

D-MUT 2,5/4 - End cover 3248033

UCT-TMF 8 - Marker for terminal blocks 0828748

UCT-TMF 8 CUS - Marker for terminal blocks 0829672

PS-8 - Test plug 3031005

PAI-4 - Test adapter 3030925

NS 15 UNPERF 2000MM VPE 10 - DIN rail, unperforated 1401695

NS 15 PERF 2000MM VPE 10 - DIN rail perforated 1401682

NS 15 AL PERF 2000MM VPE 10 - DIN rail perforated 1401763

NS 15 WH PERF 2000MM-VPE 10 - DIN rail perforated 1204096

ZB 8:UNBEDRUCKT - Zack marker strip 1052002

ZB 8 CUS - Zack marker strip 0825011

UC-TM 8 - Marker for terminal blocks 0818072

UC-TM 8 CUS - Marker for terminal blocks 0824597

UCT-TM 8 - Marker for terminal blocks 0828740

UCT-TM 8 CUS - Marker for terminal blocks 0829616

ZB 8,LGS:FORTL.ZAHLEN - Zack marker strip 1052015

ZB 8,QR:FORTL.ZAHLEN - Zack marker strip 1052028

ZB 8,LGS:L1-N,PE - Marker for terminal blocks 1052413

SZS 1,0X4,0 VDE - Screwdriver 1205066

PROJECT COMPLETE - Software 1050453

MUT 6-PE - Mini protective conductor terminal block

3248040