Phoenix Contact emergency stop switches are electromechanical switching devices with a safety function. They are used to safely shut down or stop machines and systems in order to prevent or minimize personal injury and property damage. The portfolio includes a modular system as well as a preconfigured solution. The preconfigured emergency stop switch is ready for immediate use and is connected via a spade connector. Thanks to its compact design, the emergency stop switch can be used flexibly and can be installed in a wide range of control points. If necessary, the emergency stop switch can be disabled for machines or system parts that are switched off and are not ready.
PSR-ESS-M0-H220-2001-C
-
Emergency stop switch
1221739
Emergency stop switch, in conjunction with appropriate evaluation unit suitable for use up to PL e (EN ISO 13849-1), SIL 3 (EN IEC 62061), lighting to indicate the ready state, panel installation, spade connection
Descărcare gratuită disponibilă.
Descărcări
Detalii despre produs
| Note on application | |
| Note on application | Only for industrial use |
| Product type | Emergency stop switch |
| Insulation characteristics | |
| Overvoltage category | II |
| Pollution degree | 2 |
| Rated surge voltage | 2.5 kV |
| Contact information | |
| Contact switching type | 2 force-guided N/C contacts |
| Contact material | AgNi |
| Voltage | max. (see load limit current) |
| Current | max. (see load limit current) |
| Electrical service life | 50,000 switching cycles |
| Mechanical service life | 50,000 switching cycles |
| Bouncing time | < 10 ms |
| Load limit current in accordance with IEC/EN 60947-5-1 | |
| Standard | IEC/EN 60947-5-1 |
| Utilization category | AC15 |
| Rated insulation voltage Ui | 250 V |
| Rated operating voltage Ue | 35 V |
| Rated operating current Ie | 5 A |
| Switching capacity | 10x Ie |
| Utilization category | DC13 |
| Rated insulation voltage Ui | 250 V |
| Rated operating voltage Ue | 35 V |
| Rated operating current Ie | 3 A |
| Switching capacity | 1.1x Ie |
| Lighting | |
| Supply voltage | 2 V |
| Supply current | max. 30 mA (recommended: 15 mA ... 20 mA) |
| Resistance | 0 Ω (external series resistor required, e.g., 1.2 kΩ, 1 W at 24 V) |
| Connection method | Spade connection |
| Dimensional drawing |
|
| Depth | 44 mm |
| Diameter | 28 mm |
| Color (Mushroom head button, illuminated) | red (RAL 3001) |
| Color (Mushroom head button) | gray (RAL 7042) |
| Color (Front frame) | yellow (RAL 1018) |
| Flammability rating according to UL 94 | V2 (Actuator) |
| V0 (Contact element) | |
| Housing material | PA/PC |
| Ambient conditions | |
| Degree of protection | IP65/IP67 (with professional installation in the appropriate installation space) |
| Ambient temperature (operation) | -25 °C ... 70 °C |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Maximum altitude | max. 2000 m (Above sea level) |
| Shock | 15g / 11 ms, in accordance with IEC 60068-2-27 |
| Vibration (operation) | 10 Hz ... 500 Hz, 0.35 mm amplitude, 5g, in accordance with IEC 60068-2-6 |
| Mounting type | Panel mount |
| Assembly note | Mounting nut torque: 1.3 Nm … 1.9 Nm |
| Mounting position | any |
UL Recognized
ID de înregistrare: E519465Functional Safety
ID de înregistrare: B 029429 0031EAC
ID de înregistrare: RU*DE*B*00073/21
Avantajele dumneavoastră
Flexible use, thanks to compact design
Easy connection with spade connector
Rapid on-site diagnostics with color-coded switching position indicator
In applications with appropriate evaluation device suitable for use up to PL e (EN ISO 13849-1), SIL 3 (EN IEC 62061)
Increased occupational safety with illuminated active/inactive status indicator