D-SUB bus connector - SUBCON-PLUS F2
2799490

D-SUB connector, 9-pos. female connector, two 35° cable entries, bus system: CAN, SUCONET K1, K2 (MOELLER), S-BUS (Saia), J-BUS (Merlin Gerin), pin assignment: 2, 3, 4, 5, 7, 9 to two screw connection terminal blocks


Detalii despre produs


Two cable infeeds are often required on the D-SUB plugs used in order to build fieldbus systems with RS-485 interfaces. The SUBCON-PLUS plugs range fulfills this requirement and routes the connection to screw terminal blocks – however, duplicated – for two cables. This means clarity during wiring and it simplifies every startup. These plugs are of course also shielded against EMC influences with a metallized housing. In addition, by placing the connection block in either the upper or lower shell, it is possible to select the cable infeed on site from the right or left .



Utilization restriction
CCCex note Use in potentially explosive areas is not permitted in China.

Product type Data plug
MTTF 6706 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
1817 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
155 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)
Pin assignment 2, 3, 6, 7, 8, 9 on two terminal blocks

Nominal voltage UN 50 V DC
Nominal current IN 100 mA
Transmission medium Copper

D-SUB connection
Connection method D-SUB socket
PCB connection
Connection method Screw connection
Stripping length 5 mm
Conductor cross section solid min. 0.14 mm²
Conductor cross section solid max. 1.5 mm²
Conductor cross section flexible min. 0.14 mm²
Conductor cross section flexible max. 1 mm²
Single-wire/terminal point, solid AWG min. 26
Single-wire/terminal point, solid AWG max. 16
Min. AWG conductor cross section, flexible 26
Max. AWG conductor cross section, flexible 18

Bus system PROFIBUS DP
Signal RS-485

Dimensional drawing
Width 16 mm
Height 44 mm
Length 60 mm

Material ABS (metal-plated)

External cable diameter 6 mm ... 10 mm (Incoming bus line)

Mechanical data
Insertion/withdrawal cycles > 200

Ambient conditions
Degree of protection IP40
Ambient temperature (operation) -20 °C ... 75 °C
Ambient temperature (storage/transport) -25 °C ... 80 °C
Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)

EAC
Identification EAC
ATEX
Identification  II 3 G Ex nA IIC T4 Gc X
Note Please follow the special installation instructions in the documentation!
Corrosive gas test
Identification ISA-S71.04-1985 G3 Harsh Group A

Free from substances that could impair the application of coating in accordance with VW-AUDI-Seat central standard P-VW 3.10.7 57 65 0

Număr articol 2799490
Unitate de ambalare 1 Bucată
Cantitate minimă pentru comandă 1 Bucată
Cod de achiziție 07
Cod produs DNC521
Pagina de catalog Pagina 450 (C-6-2019)
GTIN 4017918156305
Greutate pe bucată (inclusiv ambalajul) 75,4 g
Greutate pe bucată (fără ambalaj) 55,2 g
Cod tarifar vamal 85366990
Țara de origine DE


ECLASS

ECLASS-9.0 27440302
ECLASS-10.0.1 27440302
ECLASS-11.0 27440302

ETIM

ETIM 8.0 EC001132

UNSPSC

UNSPSC 21.0 39121400

cUL Recognized

ID de înregistrare: FILE E 238705
Approval Specification Data
Tensiune nominală UN Curent nominal IN Secțiune transversală AWG Secțiune transversală mm2

UL Recognized

ID de înregistrare: FILE E 238705
Approval Specification Data
Tensiune nominală UN Curent nominal IN Secțiune transversală AWG Secțiune transversală mm2

ATEX

ID de înregistrare: PxCIF14ATEX2744267X

cULus Recognized


China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values

Produse compatibile



Avantajele dumneavoastră

Separate terminal blocks for each cable
Easy assembly thanks to knurled screws
Can be used universally
Assembly under field conditions
High level of EMC
Flexibility in terms of cable entry selection
High transmission speed
Change to the D-SUB orientation through a reversible connection block