CN-LAMBDA/4-2.2-BB - Surge protection device - 2800024

Product properties

IEC test classification	C2
	C3
	D1
VDE requirement class	C2
	C3
	D1
Type	Intermediate plug
Surge protection fault message	none

Connection data

Connection method	N connector 50 Ω
Tightening torque	1.4 Nm ... 1.7 Nm (N coupling nut)

Dimensions

Width	26.1 mm
Height	66 mm
Depth	83 mm

Material specifications

Color	nickel color
Seal material	Silicon
Housing material	Brass (CuZn)
Housing surface material	Ni
Inner conductor material	BeCu
Inner conductor surface material	Gold
Insulation body material	PTFE

Mechanical properties

Mechanical data
Open side panel	No

Protective circuit

Direction of action	Line-Shield/Earth Ground
Nominal current I_N	5 A (25 °C)
Nominal discharge current I_n (8/20) µs (line-ground)	50 kA
Nominal discharge current I_n (8/20) µs (line-shield)	50 kA
Pulse discharge current I_imp (10/350) µs	20 kA
Pulse discharge current I_imp (10/350) µs (line-earth)	20 kA
Total surge current (8/20) µs	60 kA
Total surge current (10/350) µs	20 kA
Max. discharge current I_max (8/20) µs maximum (line-earth)	60 kA
Max. discharge current I_max (8/20) µs maximum (line-shield)	60 kA
Impulse discharge current (10/350) µs, peak value l_imp	20 kA
Output voltage limitation at 1 kV/µs (line-earth) spike	≤ 12 V (6 kV / 3 kA)
Output voltage limitation at 1 kV/µs (line-shield) spike	≤ 12 V (6 kV / 3 kA)
Output voltage limitation at 1 kV/µs (line-earth) static	≤ 12 V (6 kV / 3 kA)
Output voltage limitation at 1 kV/µs (line-shield) static	≤ 12 V (6 kV / 3 kA)
Voltage protection level U_p (line-earth)	≤ 12 V (6 kV / 3 kA)
Voltage protection level U_p (line-shield)	≤ 12 V (6 kV / 3 kA)
Input attenuation aE, asym.	typ. 0.05 dB (≤ 0.15 dB)
Frequency range	0.82 GHz ... 2.2 GHz
Voltage standing wave ratio VSWR in a 50 Ω system	typ. 1.10 (≤ 1.20 (0.82 GHz...2.2 GHz))
Permissible HF power P_max at VSWR = xx (50 ohm system)	≤ 500 W
Permissible HF power P_max at VSWR = xx (50 ohm system)		≤ 4 kW (peak)
Surge protection fault message	none
Impulse durability (line-earth)	C2 - 10 kV / 5 kA
Impulse durability (line-earth)		D1 - 2.5 kA
Impulse durability (line-shield)	C2 - 10 kV/5 kA
Impulse durability (line-shield)		D1 - 2.5 kA

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP68
Ambient temperature (operation)	-40 °C ... 90 °C

Standards and regulations

VDE requirement class	C2
	C3
	D1
Standards Information technology specification
Standards/regulations	IEC 61643-21
	IEC 61643-21
Standards/specifications	IEC 61643-21
Note	2005

Mounting

Tuotenumero	2800024
Pakkausyksikkö	1 Kappaletta
Vähimmäistilausmäärä	1 Kappaletta
Tuoteavain	CL3312
Tuotekoodi	CL3312
GTIN	4046356367967
Paino kappaletta kohti (sis. pakkauksen)	191 g
Paino kappaletta kohti (ilman pakkausta)	191 g
Tullitariffinumero	85363010
Alkuperämaa	US

EU RoHS
Täyttää RoHS-direktiivin vaatimukset	Kyllä (Ei poikkeussäännöksiä)
EU REACH SVHC
Huomautus REACH-kandidaattiaineesta (CAS-nro)	Aineen pitoisuus ei ole yli 0,1 %.

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

CN-LAMBDA/4-2.2-BB - Surge protection device

2800024

Tuotetiedot

Yhteensopivat tuotteet

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

CN-LAMBDA/4-2.2-BB - Surge protection device 2800024

Tuotetiedot

Yhteensopivat tuotteet

CN-UB/MP - Mounting panel 2818135

CN-UB/MP-90DEG-50 - Mounting panel 2803137

CN-UB/MP - Mounting panel 2818135

CN-LAMBDA/4-2.2-BB - Surge protection device

2800024