1. Etusivu
  2. Tuotteet
  3. Motor starters and electronic switching devices
  4. Solid-state contactors
  5. Reversing load relay - ELR W3/ 9-500
The figure shows the version ELR W 3/9-400

Reversing load relay - ELR W3/ 9-500
2964186

Electronic reversing load relay, for direct driving of equipment in the 3-phase network, with light indicator and protection circuit, output: 110-550 V AC/3 x 9 A

Tuotetiedot

Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area
Product type Solid-state contactor
Operating mode 100% operating factor
Number of phases 3
Maximum power dissipation for nominal condition 13.5 W
Mains type 3-phase
Test voltage Input/output 2.5 kV (50 Hz, 1 min., input/output)
Reversing frequency ≤ 10 Hz (At cos φ = 0.5)
Control
Input name Control input right/left
Quiescent current 40 mA
Rated actuating voltage UC 24 V DC
Triggering voltage range 19.2 V DC ... 30 V DC
Voltage range with reference to UC 0.8 ... 1.25
0.8 ... 1.25
Rated actuating current IC 7.5 mA
Reaction time in normal load operation 50 ms
50 ms
Protective circuit Reverse polarity protection; Polarity protection diode
Surge protection
Operating voltage display Green LED
Indication Red LED
Status display Yellow LED
Switch-over frequency < 10 Hz (At cos φ > 0.5)
Switchover time RL/LL (turn-on time) 20 ms
AC output
Rated operating voltage Ue 500 V AC
Operating voltage range 110 V AC ... 550 V AC
Peak offstate voltage 1200 V
Mains frequency 50 Hz
60 Hz
Load current 9 A (see derating curve)
Load current range 150 mA
Leakage current typ. 7 mA
Residual voltage typ. 1.5 V
Surge current 230 A (tp = 10 ms, at 25 °C)
Max. load value 265 A2s
Protective circuit RC element; RC element
Surge protection
Surge voltage protection > 910 V
Control circuits
Connection method Screw connection
Stripping length 8 mm
Screw thread M3
Conductor cross section solid 0.2 mm² ... 6 mm²
Conductor cross section flexible 0.2 mm² ... 4 mm²
Conductor cross section AWG 24 ... 10
Control circuits
Connection method Screw connection
Stripping length 8 mm
Screw thread M3
Conductor cross section solid 0.2 mm² ... 6 mm²
Conductor cross section flexible 0.2 mm² ... 4 mm²
Conductor cross section AWG 24 ... 10
Width 62 mm
Height 84 mm
Depth 110 mm
Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -20 °C ... 60 °C
Ambient temperature (storage/transport) -20 °C ... 70 °C
Air clearances and creepage distances between the power circuits
Standards/regulations EN 50178
EMC regulations
Standards/regulations EN 61000-6-2
EN 61000-6-4
Mounting type DIN rail mounting
Assembly instructions Can be aligned with > 20 mm spacing
Mounting position Vertical (horizontal DIN rail)
Tuotenumero 2964186
Pakkausyksikkö 1 Kappaletta
Vähimmäistilausmäärä 1 Kappaletta
Tuoteavain CK7222
Tuotekoodi CK7222
Luettelosivu Sivu 190 (IF-2011)
GTIN 4017918099398
Paino kappaletta kohti (sis. pakkauksen) 778,5 g
Paino kappaletta kohti (ilman pakkausta) 662,22 g
Tullitariffinumero 85364900
Alkuperämaa DE

ECLASS

ECLASS-9.0 27371014
ECLASS-10.0.1 27371014
ECLASS-11.0 27371014

ETIM

ETIM 8.0 EC002055

UNSPSC

UNSPSC 21.0 39122300

EAC

Approval ID: TR_TS_D_00573_c
REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Edut

High switching frequency
Noise and wear-free switching up to 500 V AC/9 A
Protective circuit in input and output
LEDs for forward and reverse running, operating voltage, and impermissible control