PLC-ASC-PT100-IN - Analog module - 2906918

Notes

Notes on operation	For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.

Product properties

Product type	Extension module
Product family	PLC logic
Operating mode	100% operating factor
Insulation characteristics: Air clearances and creepage distances
Insulation	Basic insulation
Overvoltage category	III
Pollution degree	2

Electrical properties

Air clearances and creepage distances
Rated insulation voltage	50 V
Rated surge voltage	0.5 kV
Supply
Rated control circuit supply voltage U_S	24 V DC
Rated control supply voltage range with reference to U_S	0.8 ... 1.1
Rated control supply current I_S	14 mA
Protective circuit	Reverse polarity protection
	Surge protection

Input data

Analog input resistance
Sensor types (RTD) that can be used	Pt 100 (IEC 60751, α = 0,00385)
Number of inputs	1
Connection technology	2-conductor
Sensor input current	900 µA
Temperature measuring range	-50 °C ... 200 °C
Maximum temperature coefficient	0.01 %/K
Maximum transmission error	1 %
Surge voltage protection	> 33 V
Resolution	10 bit (scaled to 0 to 1000)
Analog input resistance
Sensor types (RTD) that can be used	Pt 1000 (IEC 60751, α = 0.00385)
Number of inputs	1
Connection technology	2-conductor
Sensor input current	900 µA
Temperature measuring range	-50 °C ... 200 °C
Maximum temperature coefficient	0.01 %/K
Maximum transmission error	1 %
Surge voltage protection	> 33 V
Resolution	10 bit (scaled to 0 to 1000)

Output data

Digital
Output name	Digital output
Switching voltage range	5 V DC ... 30 V DC
Switching current	≤ 3 mA

Connection data

Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	0.14 mm² ... 2.5 mm²
Conductor cross section flexible	0.14 mm² ... 2.5 mm²
	0.2 mm² ... 2.5 mm² (Single ferrule)
	2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross section AWG	26 ... 14
Tightening torque	0.45 Nm ... 0.55 Nm (Usually these terminal blocks must be supported during conductor connection (held by one hand, supported on the housing))

Signaling

Operating voltage display	Green LED
Error indication	Red LED

Dimensions

Width	6.2 mm
Height	80 mm
Depth	94 mm

Material specifications

Color	gray (RAL 7042)

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-20 °C ... 50 °C
Ambient temperature (storage/transport)	-20 °C ... 70 °C

Approvals

CE
Certificate	CE-compliant
UL, USA/Canada
Identification	UL 508 Listed

Standards and regulations

Air clearances and creepage distances
Standards/regulations	DIN EN 50178

Mounting

Mounting type	DIN rail mounting
Assembly note	in rows with zero spacing
Mounting position	any

Tuotenumero	2906918
Pakkausyksikkö	1 Kappaletta
Vähimmäistilausmäärä	1 Kappaletta
Tuoteavain	DK2622
Tuotekoodi	DK2622
Luettelosivu	Sivu 431 (C-5-2017)
GTIN	4055626153797
Paino kappaletta kohti (sis. pakkauksen)	79,4 g
Paino kappaletta kohti (ilman pakkausta)	53,3 g
Tullitariffinumero	85389099
Alkuperämaa	DE

EU RoHS
Täyttää RoHS-direktiivin vaatimukset	Kyllä
poikkeussäännökset siltä osin kuin ne ovat tiedossa	7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 Löydät tuotekohtaisen Kiinan RoHS-ilmoitusluettelon kunkin tuotteen latausalueelta Valmistajan ilmoitus -kohdasta. EFUP-E-merkinnän sisältäville tuotteille ei tarvita Kiinan RoHS-ilmoitusluetteloa, eikä sitä tarvitse siksi laatia.
EU REACH SVHC
Huomautus REACH-kandidaattiaineesta (CAS-nro)	Lead (CAS-nro: 7439-92-1)
SCIP	048ef9ee-3c69-4f14-8bb1-eae8dd8c0c8a

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PLC-ASC-PT100-IN - Analog module

2906918

Tuotetiedot

ECLASS

ETIM

UNSPSC

Yhteensopivat tuotteet

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PLC-ASC-PT100-IN - Analog module 2906918

Tuotetiedot

ECLASS

ETIM

UNSPSC

Yhteensopivat tuotteet

PLC-V8C/PT-24DC/BM2 - Controller 2907446

PLC-V8C/SC-24DC/BM2 - Controller 2907447

PLC-V8C/PT-24DC/SAM2 - Controller 2907443

PLC-V8C/SC-24DC/SAM2 - Controller 2907445

PLC-V8C/PT-24DC/RS485 - Controller 1452919

PLC-ASC-PT100-IN - Analog module

2906918