QUINT-DIODE/48DC/2X20/1X40 - Redundancy module
2320160

DIN rail diode module 48 V DC/2x20 A or 1x40 A. Uniform redundancy up to the consumer.

Докладно про виріб

Сумісна продукція

Переваги

Flexible
Rugged design
Consistent redundancy up to the load

Поширені запитання

Is this module also suitable for series connection of power supplies?

No, the QUINT-DIODE/48DC/2X20/1X40 can also be used in a series connection of power supplies. Correct wiring can protect the power supplies from critical voltages at the time of switch-on and switch-off, especially with capacitive loads.
NOTE:<... Переглянути більше

No, the QUINT-DIODE/48DC/2X20/1X40 can also be used in a series connection of power supplies. Correct wiring can protect the power supplies from critical voltages at the time of switch-on and switch-off, especially with capacitive loads.
NOTE:
Since "-" is not connected for the protection of a series circuit, this device is not operated in accordance with
its specification.

Переглянути менше

Can the item also be used to decouple 110 V power supplies?

The integrated transient surge protection prevents use with 110 V voltages. However, the diodes are designed for up to 150 V. If "-" is not connected and is routed past the module, 110 V power supplies can also be decoupled from each other.
NOTE:<... Переглянути більше

The integrated transient surge protection prevents use with 110 V voltages. However, the diodes are designed for up to 150 V. If "-" is not connected and is routed past the module, 110 V power supplies can also be decoupled from each other.
NOTE:
Since "-" must not be connected for use with 110 V voltages, this device is not operated in accordance with its specification if used with that kind of wiring.

Переглянути менше
Переглянути ЧЗП