HC-EVO-M1-BWS-PLRBK
-
Housing
1424437
Panel mounting base M1, with single locking latch, material: PA, height: 24 mm, cable gland: none, protective cover: no, Standard, for modular contact inserts
Detalhes dos produtos
| General | for single module width modular contact inserts from the HEAVYCON modular system |
| Product type | Housing with locking latch |
| Housing type | Panel mounting base |
| Application | Standard |
| Type | M1 |
| Protective cover | no |
| Shielded | no |
| Pg screw connection | none |
| Dimensional drawing |
|
| Width | 40.6 mm |
| Height | 24 mm |
| Length | 68.6 mm |
| Drill hole distance, horizontal | 57 mm |
| Drill hole distance, vertical | 21.6 mm |
| Hole diameter | 4.5 mm |
| Installation dimensions | |
| Width of the assembly cutout | 28.6 mm |
| Length of the assembly cutout | 48.2 mm |
| Flammability rating according to UL 94 | V0 (Housing) |
| V0 (Interlock) | |
| Seal material | NBR, conductive |
| Housing material | PA |
| Locking latch material | PA |
| Mechanical data | |
| Locking type | Latch |
| Tightening torque | 0.5 Nm ... 0.8 Nm (For M3 mounting screws on the panel-mount base) |
| Assembly note | The housing can accommodate all Phoenix Contact modules with a single module width. Exception: Push-in TWIN modules with Order Numbers 1423962 and 1423961 may not be used due to the lack of rotation protection. |
| The housing can accommodate all Phoenix Contact modules with single module width. Exception: Push-in TWIN modules with Item No.. 1423962 and 1423961 may not be used due to the lack of rotation protection. |
| Ambient conditions | |
| Degree of protection | IP66 |
| Impact strength | IK06 |
| Ambient temperature (operation) | -40 °C ... 125 °C |
