NF PD IOL R
-
Inductive coupler
1736165
Remote, wireless power and IO-Link coupler, 18 W, M12 connection technology, IO-Link port Class A, IP68, design M30 x 1.5, can be combined with NF PD IOL B
Ця продукція вимагає додаткових виробів для експлуатації.
Необхідні приналежності
Докладно про виріб
| Product type | Inductive coupler |
| Application | IO-Link |
| Power | |
| MTTF | 1081 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| 452 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) | |
| 155 Years (SN 29500 standard, temperature 40°C, operating cycle 100%) | |
| Insulation characteristics | |
| Pollution degree | 3 (IEC 60947-1:2007) |
| Digital | |
| Number of inputs | 2 |
| Current input signal | < 8 mA |
| Switching level "0" signal | < 5 V |
| Switching level "1" signal | > 13 V |
| Data: IO-Link port, Class A in accordance with V 1.1.1 | |
| Data rate | 38.4 kbps (COM2) |
| 230.4 kbps (COM3) | |
| Transmission length | 20 m (Maximum cable length) |
| Inductive: Power transmission | |
| Switch-on time | 1400 ms (Coupling system) |
| 600 ms (Device) | |
| Range | min. 0 mm |
| ≤ 7 mm | |
| Center offset | ± 5 mm |
| Angular offset | 15 ° |
| Wireless modules that can be connected | 1 (Base coupler) |
| Frequency range | 100 kHz ... 148.5 kHz (Power transmission) |
| Output power | 18 W (Nominal transmission capacity) |
| Wireless | |
| Wireless modules that can be connected | 1 (Base coupler) |
| Frequency range | 2.4 GHz ... 2.47 GHz (Data transmission) |
| No. of channels | 12 |
| Data rate | 2 Mbps |
| Dimensional drawing |
|
| Width | 30 mm |
| Height | 30 mm |
| Depth | 86 mm |
| Material (Housing) | Stainless steel 1.4404 (AISI 316L) |
| Material (Active surface) | LCP |
| Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6 | : 5 g per spatial direction, 10 Hz ... 150 Hz, amplitude ±0.34 mm |
| Shock in accordance with EN 60068-2-27/IEC 60068-2-27 | : 15g, 11 ms period, half-sine shock pulse |
| Continuous shock in accordance with EN 60068-2-27/IEC 60068-2-27 | : 10 g, 16 ms duration, half-sine shock pulse, 1,000 shocks per spatial direction |
| Ambient conditions | |
| Degree of protection | IP68 |
| Ambient temperature (operation) | -20 °C ... 55 °C (observe derating) |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Altitude | < 2000 m |
| Permissible humidity (operation) | 10 % ... 85 % (Condensation on the active surface and changes in humidity can affect the switching distances) |
| CE | |
| Certificate | CE-compliant |
| Wireless approval, Europe | |
| Note | RED 2014/53/EU |
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Noise immunity | Immunity in accordance with EN 61000-6-2 |
| Electrostatic discharge | |
| Standards/regulations | EN 61000-4-2 |
| Electrostatic discharge | |
| Contact discharge | ± 4 kV (Test Level 2) |
| Discharge in air | ± 8 kV (Test Level 3) |
| Comments | Criterion B |
| Electromagnetic HF field | |
| Standards/regulations | EN 61000-4-3 |
| Electromagnetic HF field | |
| Frequency range | 80 MHz ... 1 GHz (Test Level 3) |
| Field intensity | 10 V/m |
| Comments | Criterion A |
| Fast transients (burst) | |
| Standards/regulations | EN 61000-4-4 |
| Fast transients (burst) | |
| Input | ± 1 kV |
| Output | ± 1 kV |
| Signal | ± 1 kV |
| Comments | Criterion B |
| Conducted interference | |
| Frequency range | 0.15 MHz ... 80 MHz (Test Level 3 - asymmetrical) |
| Comments | Criterion A |
| Voltage | 10 V (80% amplitude modulation with 1 kHz) |
| Emitted interference | |
| Standards/regulations | EN 55016-2-3 |
| Comments | Class A, industrial applications |
| Criteria | |
| Criterion A | Normal operating behavior within the specified limits. |
| Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
| Free from substances that could impair the application of coating | VDMA 24364:2018-05 |
| Mounting type | Threaded pipe (M30 x 1.5) |
| Assembly note | Not flush, maximum tightening torque for housing nut: 40 Nm |
| Mounting position | any |
Переваги
Wireless: No mechanical wear, no contamination, no tilting during coupling
Flexible: In addition to the power, IO-Link data or two digital PNP signals can also be transmitted.
Robust: IP68 stainless steel housing with M12 connections for use in demanding environments
Compact: M30 design for space-saving mounting
Plug-and-play: Base and remote couplers connect automatically in any number (1:n), no configuration required
Поширені запитання
Do the devices meet the cybersecurity requirements of the Radio Equipment Directive (RED)?
The requirements of Delegated Act 2022/30 of the RED 2014/53/EU with regard to article 3.3 d,e,f do not apply to the product.
Article 3.3, d: The devices do not have active access to network communication They are not able to disrupt network commu...
Переглянути більше
The requirements of Delegated Act 2022/30 of the RED 2014/53/EU with regard to article 3.3 d,e,f do not apply to the product.
Article 3.3, d: The devices do not have active access to network communication They are not able to disrupt network communication or misuse resources. Therefore, this requirement does not apply to the devices.
Article 3.3, e: Not applicable to the devices, as no personal data is processed and the privacy of end users is not affected
Article 3.3, f: Not applicable, as the devices are not used for financial transactions