1. Página inicial
  2. Produtos
  3. Uninterruptible power supplies (UPS)
  4. DC UPS
  5. Uninterruptible power supply - QUINT4-UPS/24DC/24DC/40/PN

Uninterruptible power supply - QUINT4-UPS/24DC/24DC/40/PN
2907079

QUINT UPS with IQ Technology, RJ45 communication interfaces (PROFINET), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 40 A, charging current: 5 A

Downloads

Detalhes dos produtos

The intelligent QUINT UPS for integration into established industrial networks: your systems continue to be supplied with uninterrupted power, even in the event of a mains failure. The battery management system with IQ Technology and a powerful battery charger ensures superior system availability.

Input voltage 24 V DC
Input voltage range 18 V DC ... 30 V DC
18 V DC ... 32 V DC
Electric strength, max. 35 V DC
Internal input fuse no
Voltage type of supply voltage DC
Inrush current ≤ 9 A (≤ 4 ms)
Reverse polarity protection yes
Fixed backup threshold 22 V DC
Dynamic activation threshold > 1 V / 100 ms
Switch-on time max. 3 s
Switch-on time during battery operation (Bat.-Start) 8 s
Voltage drop, input/output 0.5 V DC
Current consumption IN (UN, IOUT = IN, Icharge = 0) 40.1 A
Current consumption Imax (UN, IOUT = IStat.Boost, Icharge = max) 51.2 A
Current consumption INo-Load(UN, IOUT = 0, Icharge = 0) 105 mA
Current consumption Icharge (UN, IOUT = 0, Icharge = max) 6.1 A
Power consumption PN (UN, IOUT = IN, Icharge = 0) 967 W
Power consumption Pmax (UN, IOUT = IStat.Boost, Icharge = max) 1122 W
Power consumption PNo-Load (UN, IOUT = 0, Icharge = 0) 2.6 W
Power consumption Pcharge (UN, IOUT = 0, Icharge = max) 148 W
Efficiency typ. 97 %
Number of outputs 1
Nominal output current (IN) 40 A (-25 °C ... 50 °C)
Short-circuit-proof yes
No-load proof yes
Switch-over time 0 ms
Output current limit In mains mode according to connected upstream current limiting device
> 45 A (Battery operation)
Power dissipation 2.8 W (Mains operation)
13 W (Mains operation)
3.51 W (Battery operation)
16.4 W (Battery operation)
UPS connection in series no
Energy storage device connection in parallel Yes, 5 (observe line protection)
Energy storage device connection in series no
Mains operation
Output voltage 24 V DC (UOUT = UIN - 0.5 V DC)
Output voltage range 18 V DC ... 30 V DC
18 V DC ... 32 V DC
Output current IN 40 A
Static Boost (IStat.Boost) 45 A
Dynamic Boost (IDyn.Boost) 60 A (5 s)
Selective Fuse Breaking (ISFB) 215 A (15 ms)
Output power POUT (UN, IOUT = IN) 960 W
Output power POUT (UN, IOUT = Istat.Boost) 1080 W
Battery operation
Output voltage 24 V DC (UOUT = UBAT - 0.5 V DC)
Output voltage range 19 V DC ... 32 V DC
Output current IN 40 A
Static Boost (IStat.Boost) 45 A
Dynamic Boost (IDyn.Boost) 60 A (5 s)
Selective Fuse Breaking (ISFB) 215 A (15 ms)
Output power POUT (UN, IOUT = IN) 960 W
Output power POUT (UN, IOUT = Istat.Boost) 1080 W
End-of-charge voltage 32 V DC
End-of-charge voltage (temperature-compensated) 25 V DC ... 32 V DC
Charging current (configurable) 5 A
Nominal capacity (without additional charger) 7 Ah ... 100 Ah
Max. capacity 135 Ah
Charging time 202.5 h
Buffer time 45 min. (38 Ah)
Deep discharge protection 19.2 V DC
Battery technology VRLA, VRLA-WTR, LI-ION
Charge characteristic curve IU0U
IQ-Technology yes
Temperature sensor yes
Temperature compensation (configurable) 42 mV/K
Input
Position 1.x
Conductor connection
Connection method Screw connection
rigid 0.5 mm² ... 16 mm²
flexible 0.5 mm² ... 16 mm²
flexible with ferrule without plastic sleeve 0.5 mm² ... 16 mm²
flexible with ferrule with plastic sleeve 0.5 mm² ... 16 mm²
rigid (AWG) 8 ... 6 (Cu)
Stripping length 10 mm (rigid/flexible)
Torque 1.2 Nm ... 1.5 Nm
Drive form screw head Slotted L
Output
Position 2.x
Conductor connection
Connection method Screw connection
rigid 0.5 mm² ... 16 mm²
flexible 0.5 mm² ... 16 mm²
flexible with ferrule without plastic sleeve 0.5 mm² ... 16 mm²
flexible with ferrule with plastic sleeve 0.5 mm² ... 16 mm²
rigid (AWG) 8 ... 6 (Cu)
Stripping length 10 mm (rigid/flexible)
8 mm (Ferrule)
Torque 1.2 Nm ... 1.5 Nm
Drive form screw head Slotted L
Signal
Position 3.x
Conductor connection
Connection method Push-in connection
rigid 0.2 mm² ... 1 mm²
flexible 0.2 mm² ... 1 mm²
flexible with ferrule without plastic sleeve 0.2 mm² ... 0.75 mm²
0.5 mm² (recommended)
flexible with ferrule with plastic sleeve 0.2 mm² ... 0.75 mm²
rigid (AWG) 24 ... 16 (Cu)
Stripping length 8 mm (rigid/flexible)
Interface PROFINET
Number of interfaces 2
Connection method RJ45
Locking Locking clip
Transmission physics Twisted-Pair
Features Autonegotiation
Autocrossing
Autopolarity
full duplex
Topology Star
Line
Transmission speed 100 Mbps
Transmission length max. 100 m
Cycle time 1 ms (RT)
Access time ≤ 2 s
Standards IEEE 802.3
IEC 61158
IEC 61784-2
Supported protocols PROFINET
LLPD
Chipset Renesas TPS-1
Electrical isolation yes
Vendor ID 00B0hex
Types of signaling DC OK (green)
Alarm (red)
Bat.-Mode (yellow)
SOC (red, green)
Data (red, green)
Product type Uninterruptible power supply
MTBF (IEC 61709, SN 29500) > 1151000 h (25 °C)
> 718500 h (40 °C)
> 365200 h (60 °C)
Environmental protection directive RoHS Directive 2011/65/EU
WEEE
Reach
Insulation characteristics
Protection class III (without PE)
Degree of pollution 2
Life expectancy (electrolytic capacitors)
Time 126720 h
Width 47 mm
Height 130 mm
Depth 125 mm
Installation dimensions
Installation distance right/left (active) 5 mm / 5 mm (POut ≥50% )
Installation distance right/left (passive) 0 mm / 0 mm (POut ≥50% )
Installation distance right/left (active, passive) 0 mm / 0 mm (POut ≤50 %)
Installation distance top/bottom (active) 50 mm / 50 mm (POut ≥50% )
Installation distance top/bottom (passive) 40 mm / 20 mm (POut ≥50% )
Installation distance top/bottom (active, passive) 40 mm / 20 mm (POut ≤50 %)
Alternative assembly
Width 123 mm
Height 130 mm
Depth 49 mm
Mounting type DIN rail mounting
Mounting position On horizontal DIN rail NS 35/7.5 and NS 35/15 acc. to EN 60715
Inflammability class in acc. with UL 94 (housing / terminal blocks) V0
Housing material Metal
Hood version Stainless steel X6Cr17
Side element version Aluminum AlMg3
Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K)
Ambient temperature (storage/transport) -40 °C ... 85 °C
Ambient temperature (start-up type tested) -40 °C
Maximum altitude ≤ 4000 m
Climatic class 3K3 (EN 60721)
Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing)
Shock 18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation) 2.3g
Protective extra-low voltage
Standards/specifications IEC 61010-1 (SELV)
IEC 61010-2-201 (PELV)
UL approval
Identification UL/C-UL Listed UL 61010-1
UL approval
Identification UL/C-UL Listed UL 61010-2-201
UL approval
Identification UL/C-UL Listed ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location)
UL approval
Identification CAN/CSA-C22.2 No. 61010-1-12
UL approval
Identification CAN/CSA-IEC 61010-2-201
UL approval
Identification CAN/CSA-C22.2 No. 213 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location)
UL approval
Identification IEC 61010-1
IEC 61010-2-201
UL approval
Identification Class Guideline DNVGL-CG-0339
Note Location classes: Temperature D (see Application/Limitation), Humidity B, Vibration A/C, EMC B
Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC
Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
EMC requirements for noise emission EN 61000-6-3
EN 61000-6-4
EMC requirements for noise immunity EN 61000-6-1
EN 61000-6-2
Interference emission Noise emission according to EN 61000-6-3 (residential and commercial)
Noise emission Additional basic standard EN 61000-6-5 (immunity in power station), IEC/EN 61850-3 (energy supply)
Noise immunity Immunity according to EN 61000-6-1 (residential), EN 61000-6-2 (industrial), and EN 61000-6-5 (power station equipment zone), IEC/EN 61850-3 (energy supply)
Immunity according to EN 61000-6-2 (industrial)
Electrostatic discharge
Standards/regulations EN 61000-4-2
Electrostatic discharge
Contact discharge 8 kV (Test Level 4)
Discharge in air 15 kV (Test Level 4)
Comments Criterion B
Electromagnetic HF field
Standards/regulations EN 61000-4-3
Electromagnetic HF field
Frequency range 80 MHz ... 1 GHz
Test field strength 20 V/m (Test Level 3)
Frequency range 1 GHz ... 6 GHz
Test field strength 10 V/m (Test Level 3)
Frequency range 1 GHz ... 6 GHz
Test field strength 10 V/m (Test Level 3)
Comments Criterion A
Fast transients (burst)
Standards/regulations EN 61000-4-4
Fast transients (burst)
Input 4 kV (Test Level 4 - asymmetrical)
Output 4 kV (Test Level 4 - asymmetrical)
Signal 4 kV (Test Level 4 - asymmetrical)
Comments Criterion B
Surge voltage load (surge)
Standards/regulations EN 61000-4-5
Input 1 kV (Test Level 3 - symmetrical)
2 kV (Test Level 3 - asymmetrical)
Output 1 kV (Test Level 3 - symmetrical)
2 kV (Test Level 3 - asymmetrical)
Signal 1 kV (Test Level 2 - asymmetrical)
Comments Criterion B
Conducted interference
Standards/regulations EN 61000-4-6
Conducted interference
I/O/S asymmetrical
Frequency range 0.15 MHz ... 80 MHz
Comments Criterion A
Voltage 10 V (Test Level 3)
Power frequency magnetic field
Standards/regulations EN 61000-4-8
Frequency 16.67 Hz
50 Hz
60 Hz
Test field strength 100 A/m
Additional text 60 s
Comments Criterion A
Frequency 50 Hz
60 Hz
Frequency range 50 Hz ... 60 Hz
Test field strength 1 kA/m
Additional text 3 s
Frequency 0 Hz
Test field strength 300 A/m
Additional text DC, 60 s
Criterion A Normal operating behavior within the specified limits.
Criterion B Temporary impairment to operational behavior that is corrected by the device itself.
N.º de artigo 2907079
Pcs./Emb 1 Unidade
Quantidade mínima de pedido 1 Unidade
Chave comercial CMU
Chave de produto CMUI43
Página de catálogo Página 317 (C-4-2019)
GTIN 4055626170039
Peso por unidade (inclusive embalagem) 770,8 g
Peso por unidade (excluindo embalagem) 770,8 g
Número do imposto alfandegário 85371091
País de origem CN

ECLASS

ECLASS-9.0 27040705
ECLASS-10.0.1 27040705
ECLASS-11.0 27040705

ETIM

ETIM 8.0 EC000382

UNSPSC

UNSPSC 21.0 39121000

EAC

Approval ID: RU S-DE.BL08.W.00764

UL Listed

Approval ID: FILE E 123528

cUL Listed

Approval ID: FILE E 123528

PROFINET

Approval ID: Z12096

DNV GL

Approval ID: TAA00002K4

EAC

Approval ID: RU-DE.B.00184/20

cUL Listed

Approval ID: FILE E 199827

UL Listed

Approval ID: FILE E 199827

cULus Listed

cULus Listed

REACh SVHC Lead 7439-92-1

Produtos compatíveis

Vantagens

Easy integration into networks using PROFINET, EtherNet/IP, EtherCAT® and USB interfaces
Evaluation of state of health (SOH) and state of charge (SOC), thanks to the intelligent battery management system (BMS)
Automatic recognition of the battery capacities and technologies (VRLA-WTR, LI-ION)
Monitoring of output current and voltage, as well as manual connection and disconnection of the system
SFB Technology selectively trips standard miniature circuit breakers. Loads connected in parallel continue working.