HC-HPR-D07-HLWH-1TTM20-EM-BK
-
Housing
1424638
Sleeve housing D7, with screw locking, material: Die-cast zinc, cable outlets: 1, straight, 1x M20, height: 54.9 mm, cable gland: none, protective cover: no, Railway applications, for increased environmental and EMC requirements, Series HPR
Detalhes dos produtos
| General | for contact insertsHC-D7, D8, A3, A4, HS2-D7,Q5, Q7, Q12 |
| Product type | Housing with screw locking |
| Housing type | Sleeve housing |
| Series | HPR-D7 |
| Application | Railway applications |
| Type | D7 |
| No. of cable outlets | 1 |
| Type of the screw connection | 1x M20 |
| Type | Low design |
| Protective cover | no |
| Shielded | yes |
| Cable outlet | straight |
| Pg screw connection | none |
| Tightening torque | 1 Nm (Locking screw) |
| Dimensional drawing |
|
| Width | 32.4 mm |
| Height | 54.9 mm |
| Length | 45.5 mm |
| Housing material | Die-cast zinc |
| Housing surface material | Powder-coated, black |
| Locking latch material | Stainless steel |
| Ambient conditions | |
| Degree of protection | IP66 (with sealing screw) |
| IP68 (0.4 bar / 30 min. with sealing screw) | |
| IP69 (ISO 20653:2013-02) | |
| Impact strength | IK09 |
| Ambient temperature (operation) | -40 °C ... 125 °C |
| Mechanical data | |
| Type of the screw connection | 1x M20 |
| Locking type | Screw |
| Assembly note | M4 locking screw, slotted hexagon head screw (wrench size 7), tightening torque: 1 Nm. The seal of the pin contact insert should be removed. Max. thread length of the screw connection: 6 mm |
| Mount contact insert with sealing screw in the housing |
Vantagens
Vibration and shock: IEC 61373/EN 50155, category 1, class 1B