Contact insert, incl. 4 mounting screws
CSA
ID de certificação: 260458| Tensão nominal UN | Corrente nominal IN | Secção transversal American Wire Gauge | Secção transversal mm2 | |
|---|---|---|---|---|
| 600 V | 19 A | 20 - 12 |
HC-COM-17-ESTC
-
Contact insert
1408465
Contact insert, number of positions: 17+PE, size: COM, power contacts: 0, control contacts: 17, number of connections per position: 1, Pin, Crimp connection, 200 V, 10 A, 0.14 mm2 ... 2.5 mm2, application: Power, Only suitable for plastic housings
Detalhes dos produtos
| General | For crimp contacts CK 1.6-ED... |
| General | Connectors may be operated only when there is no load/voltage. |
| Assembly note | To ensure correct use, installation in housing with IP54 protection or better is required |
| Product type | Contact insert with a fixed no. of positions |
| Series | HC-COM |
| Application | Power |
| Type | COM |
| Number of positions | 17 |
| Connection profile | 17+PE |
| Contact numbering | 1 - 17 |
| Number of connections per position | 1 |
| No. of power contacts | 0 |
| No. of control contacts | 17 |
| Contact material type | turned |
| rolled | |
| Insulation characteristics | |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Dimensional drawing |
|
| Width | 25.6 mm |
| Height | 38.7 mm |
| Length | 45 mm |
| Mechanical characteristics | |
| Contact diameter | 1.6 mm |
| Connection technology | |
| Connection technology | Crimp connection |
| Number of connections per position | 1 |
| Connection in acc. with standard | IEC / EN |
| Conductor connection | |
| Conductor cross section | 0.14 mm² ... 2.5 mm² |
| Connection cross section AWG | 26 ... 14 |
| Stripping length of the individual wire | 8 mm |
| 6 mm (at 2.5 mm²) | |
| Rated voltage (III/2) contacts | 250 V |
| Rated voltage (III/3) | 200 V |
| Rated voltage for power contacts | 200 |
| Rated surge voltage | 4 kV |
| Rated current | 10 A |
| Mechanical data | |
| Insertion/withdrawal cycles | ≥ 500 |
| Flammability rating according to UL 94 | V0 |
| Seal material Profile gasket | NBR |
| Contact material | Copper alloy |
| Contact surface material | Ag (alternatively Au) |
| Contact carrier material | PC |
| Ambient conditions | |
| Ambient temperature (operation) | -40 °C ... 100 °C (including heating up of contacts) |
cUL Recognized
ID de certificação: E118976| Tensão nominal UN | Corrente nominal IN | Secção transversal American Wire Gauge | Secção transversal mm2 | |
|---|---|---|---|---|
| 600 V | 10.5 A | 22 - 14 |
UL Recognized
ID de certificação: E118976| Tensão nominal UN | Corrente nominal IN | Secção transversal American Wire Gauge | Secção transversal mm2 | |
|---|---|---|---|---|
| 600 V | 19.5 A | 22 - 14 |
EAC
ID de certificação: RU C-DE.AI30.B.01102
Vantagens
Shock and vibration-resistant in accordance with DIN EN 61373