QUINT-UPS/ 1AC/ 1AC/500VA - Uninterruptible power supply - 2320270

Input data

AC operation
Input voltage	240 V AC
		100 V AC
		120 V AC -20 % / +15 %
		230 V AC -20 % / +15 %
Nominal input voltage range	100 V AC ... 240 V AC
Input voltage range	184 V AC ... 264 V AC
		96 V AC ... 138 V AC
		96 V AC ... 264 V AC
Input voltage range AC	196 V AC ... 264 V AC
		102 V AC ... 138 V AC
		96 V AC ... 264 V AC
Voltage type of supply voltage	AC
Nominal frequency	50 Hz ... 60 Hz
Nominal frequency		50 Hz ... 60 Hz
AC frequency range	45 Hz ... 65 Hz
Buffer period	1 h (38 AH)
Current consumption	2.2 A (230 V AC)
		0.18 A (230 V AC)
		0.8 A (230 V AC)
		3.7 A (230 V AC)
		4.3 A (120 V AC)
		0.35 A (120 V AC)
		1.3 A (120 V AC)
		6.8 A (120 V AC)
Fixed backup threshold	Configurable, 10 % deviation from nominal input voltage set by default
Variable connect threshold	Can be configured using UPS-CONF software
Power factor (cos phi)	0.8
Device mains fuse	10 A
Permissible backup fuse	B16 230 V AC
Permissible backup fuse		20 A 120 V AC, Listed breaker
Digital Control Low-Active (configurable)
Battery-operated start 120 V AC Default	Plug-in bridge (output +24 V DC, 30 mA to input A1)
Battery-operated start 230 V AC Default	Plug-in bridge (output +24 V DC, 30 mA to input A2)

Output data

Classification according to IEC 62040-3	VFD-SS-311
Efficiency	> 98 % (Mains operation)
		> 98 % (120 V AC)
		> 86 % (Battery operation)
Nominal output voltage	120 V AC
Nominal output voltage		230 V AC
Output voltage range	96 V AC ... 144 V AC
Output voltage range		184 V AC ... 264 V AC
Form of output voltage	Pure sine
Nominal output current (I_N)	4.3 A (120 V AC, -25 °C ... 50 °C)
Nominal output current (I_N)		2.2 A (230 V AC, -25 °C ... 40 °C)
Output current limit	5.2 A (120 V AC)
Output current limit		2.7 A (230 V AC)
POWER BOOST (I_Boost)	5.2 A (120 V AC, -25 °C ... 40 °C)
POWER BOOST (I_Boost)		2.7 A (230 V AC, -25 °C ... 40 °C)
Bridging time	3600 s
Derating	> 50 °C ... 70 °C (2.5 %/K)
UPS connection in parallel	no
UPS connection in series	no
Output power	516 W
Apparent power	500 VA
Nominal power	400 W
Crest factor	2.8
Switch-over time	< 10 ms
Connection in parallel	no
Connection in series	no
Mains operation
Nominal output voltage	120 V AC
Nominal output voltage		230 V AC
Output voltage range	102 V AC ... 138 V AC
Output voltage range		196 V AC ... 264 V AC
Nominal output current (I_N)	4.3 A (120 V AC)
Nominal output current (I_N)		2.2 A (230 V AC)
POWER BOOST (I_Boost)	5.2 A
POWER BOOST (I_Boost)		2.7 A
Permissible backup fuse	AC: 1 x circuit breaker - recommended fuse
Battery operation
Nominal output voltage	120 V AC
Nominal output voltage		230 V AC
Nominal output current (I_N)	2.2 A (230 V AC)
Nominal output current (I_N)		4.3 A (120 V AC)
POWER BOOST (I_Boost)	2.7 A (230 V AC)
POWER BOOST (I_Boost)		5.2 A (120 V AC)
Permissible backup fuse	25 A in parallel operation of 3.5 AH and 60 WH
Permissible backup fuse		50 A in parallel operation of 7.2 AH, 12 AH, and 38 AH
Buffer period	10 min (400 W / 7,2 Ah)
Signal: Alarm
Maximum switching voltage	≤ 30 V DC
Output voltage	24 V (SELV)
Continuous load current	≤ 30 mA
Signal: Battery mode
Maximum switching voltage	≤ 30 V DC
Output voltage	24 V (SELV)
Continuous load current	≤ 30 mA
Signal: POWER BOOST
Maximum switching voltage	≤ 30 V DC
Output voltage	24 V (SELV)
Continuous load current	≤ 30 mA

Energy storage

Nominal voltage U_N	24 V DC
End-of-charge voltage	25 V DC ... 30 V DC (temperature compensated)
Charging current	2 A
Nominal capacity range	3.4 Ah ... 114 Ah (3x 38 Ah)
Battery presence check/time interval	1 min
Battery presence check (cyclic)	60 s
Energy storage device connection in parallel	yes, 3 (observe line protection)
Energy storage device connection in series	no
IQ technology	Yes
Temperature compensation	42 mV/K (preset)
Temperature compensation (preset)	-42 mV/K
Permissible backup fuse	50 A
Network management	Yes

Connection data

Input
Connection method	Screw connection
Conductor cross section, rigid min.	1.5 mm²
Conductor cross section, rigid max.	6 mm²
Conductor cross section flexible min.	1.5 mm²
Conductor cross section flexible max.	4 mm²
Conductor cross section AWG min.	18
Conductor cross section AWG max.	10
Stripping length	8 mm
Screw thread	M4
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm
Output
Connection method	Screw connection
Conductor cross section, rigid min.	1.5 mm²
Conductor cross section, rigid max.	6 mm²
Conductor cross section flexible min.	1.5 mm²
Conductor cross section flexible max.	4 mm²
Conductor cross section AWG min.	18
Conductor cross section AWG max.	10
Stripping length	8 mm
Screw thread	M4
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm
Signal
Connection method	Screw connection
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	10
Stripping length	8 mm
Screw thread	M4
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm

Interfaces

Interface	IFS (Interface system data port)
	MINI-USB type B

Signaling

Types of signaling	LED
		Active switching outputs
		Interface/software
Signal output: Status indicator 120 V AC
Signalization designation	AC mode of operation
Status display	LED
Note on status display	static on
Signal output: Status indicator 230 V AC
Signalization designation	AC mode of operation
Status display	LED
Color	green
Note on status display	static on
Signal output: Transistor output, active
Signalization designation	Alarm
Status display	LED
Color	red
Note on status display	static on
Signal output: Transistor output, active
Signalization designation	Battery mode
Status display	LED
Color	yellow
Note on status display	static on
Signal output: Transistor output, active
Signalization designation	POWER BOOST
Status display	LED
Color	yellow
Note on status display	static on
Signal output
Signalization designation	Battery charge
Status display	Bar graph
Color	red/green

Electrical properties

Insulation voltage input, output / housing	1.5 kV AC
	2.1 kV DC

Product properties

Product type	AC UPS
Product family	QUINT AC UPS
IQ technology	Yes
MTBF (IEC 61709, SN 29500)	> 240513 h (40 °C)
Insulation characteristics
Protection class	I
Life expectancy (electrolytic capacitors)
Time	184982 h

Dimensions

Width	125 mm
Height	130 mm
Depth	125 mm
Installation dimensions
Installation distance right/left	5 mm / 5 mm
Installation distance top/bottom	50 mm / 50 mm

Mounting

Mounting type	DIN rail mounting
Assembly note	alignable: P_N ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm vertically alignable: P_N <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Mounting position	horizontal DIN rail NS 35, EN 60715

Material specifications

Housing material	Metal
Housing material	Steel sheet, zinc-plated
Type of housing	Aluminum (AlMg3)
Hood version	Galvanized sheet steel, free from chrome (VI)
Side element version	Aluminum

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C (> 50 °C Derating: 2.5 %/K)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Ambient temperature (start-up type tested)	-40 °C
Climatic class	3K3 (in acc. with EN 60721)
Max. permissible relative humidity (operation)	≤ 95 % (25 °C, non-condensing)
Shock	18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation)	< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)
	15 Hz ... 150 Hz, 2.3g t_v= 90 min.

Standards and regulations

Rail applications	EN 50121-4
Standards
Standard uninterruptible power supply systems	EN 62040-1
Uninterruptible power supply systems
Standard designation	Uninterruptible power supply systems
Standards/specifications	EN 62040-1

Approvals

UL
Identification	UL/C-UL Recognized UL 1778

EMC data

Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
Interference emission	Noise emission in accordance with EN 62040-2
Noise immunity	Immunity in accordance with EN 62040-2
Conducted noise emission
Standards/regulations	EN 62040-02 (Class C1)
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	8 kV (Test Level 4)
Discharge in air	15 kV (Test Level 4)
Comments	Criterion A
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 3 GHz
Test field strength	10 V/m
Frequency range	1 GHz ... 3 GHz
Test field strength	10 V/m
Frequency range	2 GHz ... 3 GHz
Test field strength	3 V/m
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	2 kV (Test Level 3 - asymmetrical)
Output	2 kV (Test Level 3 - asymmetrical)
Signal	2 kV (Test Level 4 - asymmetrical)
Comments	Criterion A
Surge voltage load (surge)
Standards/regulations	EN 61000-4-5
Surge voltage load (surge)
Input	1 kV (Test Level 2 - symmetrical)
Input		2 kV (Test Level 3 - asymmetrical)
Output	1 kV (Test Level 2 - symmetrical)
Output		2 kV (Test Level 3 - asymmetrical)
Comments	Criterion A
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
Input/output/signal	asymmetrical
Frequency range	0.15 MHz ... 80 MHz
Comments	Criterion A
Voltage	10 V (Test Level 3)
Emitted interference
Radio interference voltage	EN 62040-2 (Class C1)
Criteria
Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.

N.º de artigo	2320270
Pcs./Emb	1 Unidade
Quantidade mínima de pedido	1 Unidade
Chave comercial	CMU
Chave de produto	CMUQ15
Página de catálogo	Página 330 (C-4-2019)
GTIN	4046356560078
Peso por unidade (inclusive embalagem)	2 510 g
Peso por unidade (excluindo embalagem)	2 244 g
Número do imposto alfandegário	85371091
País de origem	DE

EU RoHS
Cumpre os requisitos de substância segundo a Diretiva RoHS	Sim (Sem regras de exceção)
China RoHS
Environment friendly use period (EFUP)	EFUP-E Nenhuma substância perigosa acima dos valores-limite
EU REACH SVHC
Nota sobre as substâncias candidatas ao REACH (n.º CAS)	Nenhuma substância numa proporção superior a 0,1 % em massa

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

QUINT-UPS/ 1AC/ 1AC/500VA - Uninterruptible power supply

2320270

Detalhes dos produtos

ECLASS

ETIM

UNSPSC

cUL Recognized

UL Recognized

IECEE CB Scheme

EAC

EAC

EAC

KC

cUL Recognized

UL Recognized

Produtos compatíveis

Vantagens

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

QUINT-UPS/ 1AC/ 1AC/500VA - Uninterruptible power supply 2320270

Detalhes dos produtos

ECLASS

ETIM

UNSPSC

Produtos compatíveis

UPS-BAT/PB/24DC/4AH - Battery module 1274117

UPS-BAT/PB/24DC/7AH - Battery module 1274118

UPS-BAT/PB/24DC/12AH - Battery module 1274119

UPS-BAT/PB/24DC/20AH - Battery module 1348516

UPS-BAT/PB/24DC/40AH - Battery module 1354641

UPS-BAT/LI/24DC/128WH - Battery module 1396415

UPS-BAT/VRLA-WTR/24DC/13AH - Battery module 2320416

UPS-BAT/VRLA-WTR/24DC/26AH - Battery module 2320429

UPS-CAP/24DC/20A/20KJ - Energy storage 2320380

CABLE-USB/MINI-USB-3,0M - USB cable 2986135

IFS-MINI-DIN-DATACABLE - Data cable 2320487

IFS-RS232-DATACABLE - Data cable 2320490

IFS-USB-DATACABLE - Data cable 2320500

UWA 130 - Mounting adapter 2901664

UWA 182/52 - Mounting adapter 2938235

FUSE 10A/400V GRL - Fuse 2908358

IFS-CONFSTICK - Memory block 2986122

IFS-CONFSTICK-L - Memory block 2901103

Vantagens

QUINT-UPS/ 1AC/ 1AC/500VA - Uninterruptible power supply

2320270